I never realised this was something EMC had trouble with. guess there'll be
alot of stuff I'll find out after i get a machine actually running with it.
At work, we number each section of the program that has each tool, N1 for
t1, N2, etc... then if we have a tool break or whatever we go to that N and
start from there. then it goes over the G43, 54, M03, etc for that tool.
On Wed, Mar 5, 2008 at 5:57 PM, Gene Heskett <[EMAIL PROTECTED]>
wrote:
> On Wednesday 05 March 2008, Stuart Stevenson wrote:
> >Gentlemen,
> > Does anyone have a procedure for starting (correctly) in the
> >middle of a program?
> >thanks
> >Stuart
>
> About the only way I've been able to bypass steps that have already been
> done,
> is to set 2 identical vars for the starting location at the top of the
> program, with one set at 0.00 and the other commented out. Then if I
> break a
> bit or have some other problem that requires the resetting of the 0.00
> points, I'll reset those and re-home them, then switch vars by setting the
> second of to the depth I had achieved, and comment out the 0.00 starter
> setting. Works great for drilling big holes and such with a 1/4 end mill.
>
> >-------------------------------------------------------------------------
> >This SF.net email is sponsored by: Microsoft
> >Defy all challenges. Microsoft(R) Visual Studio 2008.
> >http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> >_______________________________________________
> >Emc-users mailing list
> >[email protected]
> >https://lists.sourceforge.net/lists/listinfo/emc-users
>
>
>
> --
> Cheers, Gene
> "There are four boxes to be used in defense of liberty:
> soap, ballot, jury, and ammo. Please use in that order."
> -Ed Howdershelt (Author)
> The hatred of relatives is the most violent.
> -- Tacitus (c.55 - c.117)
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Emc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
