On Sat, 17 Jan 2009, Donnie Timmons wrote: > Date: Sat, 17 Jan 2009 10:30:47 -0500 > From: Donnie Timmons <dtimm...@etex.net> > Reply-To: "Enhanced Machine Controller (EMC)" > <emc-users@lists.sourceforge.net> > To: emc-users@lists.sourceforge.net > Subject: Re: [Emc-users] Mesa 5i23 and 7i37 I/O problem > > Sebastian > > I now have the limits working I moved them to pin 32-37, seams pin 24 thru > pin 31 on P3 are not useable. Would I be better off moving the cable to P4 > and leave P3 unused? I will still need some inputs for amp faults and spindle > drive.
Are you sure you dont have a cable to a 7I37 reversed? that would cause these exact symptoms. This is because it would wire the 7I37 outputs to the first 8 inputs (the one that dont work for you) > > Donnie > ------------------------------------------------------------------------------ > This SF.net email is sponsored by: > SourcForge Community > SourceForge wants to tell your story. > http://p.sf.net/sfu/sf-spreadtheword > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > Peter Wallace Mesa Electronics (\__/) (='.'=) This is Bunny. Copy and paste bunny into your (")_(") signature to help him gain world domination. ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
