Sorry, a typo. I was using commanded speed. But the timedelay option sounds more efficient.
> -----Original Message----- > From: Jeff Epler [mailto:jep...@unpythonic.net] > Sent: Friday, 8 May 2009 12:38 AM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] Emc-users Digest, Vol 37, Issue 15 > > you're using feedback speed to decide when to turn off the > spindle? why not use commanded speed instead? or maybe just > a timeout based on the 3 second time you mentioned for > acceleration (the component 'timedelay' > can do this)? > > Jeff > > -------------------------------------------------------------- > ---------------- > The NEW KODAK i700 Series Scanners deliver under ANY > circumstances! Your production scanning environment may not > be a perfect world - but thanks to Kodak, there's a perfect > scanner to get the job done! With the NEW KODAK i700 Series > Scanner you'll get full speed at 300 dpi even with all image > processing features enabled. http://p.sf.net/sfu/kodak-com > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
