I would like to make a rack that matches an involute gear. I guess we could just put in a radius of a 'very large' number, rather than infinity.
The square root radical would evaluate to the square root of 2, but I don't know what I would use as the value of alpha. Suggestions? IHS ... Jack On Mon, May 11, 2009 at 2:42 AM, Kirk Wallace <kwall...@wallacecompany.com>wrote: > On Sat, 2009-05-09 at 22:13 +0100, Dave Caroline wrote: > ... snip > > > > If you make a generic cgode involute program I would be interested > > seeing it. > > > > Dave Caroline > > It's not g-code, but is what I have so far: > http://www.wallacecompany.com/machine_shop/gears/involute_equation-1a.png > (Short URL) http://alturl.com/oqwv > > -- > Kirk Wallace > http://www.wallacecompany.com/machine_shop/ > http://www.wallacecompany.com/E45/index.html > California, USA > > > > ------------------------------------------------------------------------------ > The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your > production scanning environment may not be a perfect world - but thanks to > Kodak, there's a perfect scanner to get the job done! With the NEW KODAK > i700 > Series Scanner you'll get full speed at 300 dpi even with all image > processing features enabled. http://p.sf.net/sfu/kodak-com > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
