On Tue, 16 Mar 2010 01:42:17 -0500, you wrote:
>I'm really not a big fan of the idea of being allowed to jog around >during a pause. Say someone is doing some internal boring bar work >and they think their cutter is getting dull, they pause, jog the boring >bar out of the hole, replace the insert and then resume. Do you really >think the software is going to be able to put that boring bar back in place >without a crash? Funny you should say that, I did just that with Mach on Saturday. I did a job run that required a blind 50mm deep 17mm dia bore, a shallow 19mm counterbore and a 15mm long internal 2mm pitch thread. I did all the drilling and boring in Mach and the threads only in EMC. I broke the insert tip on one job (probably swarf build up), feed held, jogged out, replaced the tip and continued without problem. I paused each job midway after that, stopped the spindle, jogged away, blew out any swarf, and resumed without incident. If Mach can do it, I'd have thought EMC should be able to be made to? Steve Blackmore -- ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
