2011/9/29 andy pugh <bodge...@gmail.com>: > On 29 September 2011 13:30, Viesturs Lācis <viesturs.la...@gmail.com> wrote: > >> Is it ok to route Hall signal in the same cable with encoder signal? >> Or are they going to disturb each other? > > It should be OK, otherwise you would be concerned about the A-encoder > interfering with the B-encoder.
Thank You! Few more questions about servo motor wiring. Motor datasheet has this information about wires: 1 Red Vcc supply voltage for Hall sensors 2 Blue HALL A 3 Green HALL B 4 White HALL C 5 Black GND for Hall sensors 6 Yellow PHASE A 7 Red PHASE B 8 Black PHASE C 1) Should I connect Hall supply voltage to +5V encoder supply voltage (and Hall GND to encoder GND)? 2) If so, what should I do about motor GND connectors on 7i39 motor connection terminal block? Do I need to wire the motor case to them? Viesturs ------------------------------------------------------------------------------ All the data continuously generated in your IT infrastructure contains a definitive record of customers, application performance, security threats, fraudulent activity and more. Splunk takes this data and makes sense of it. Business sense. IT sense. Common sense. http://p.sf.net/sfu/splunk-d2dcopy1 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
