Robert Pabon wrote: > Where do you guys buy yours? Looking for affordable, quality units. Need .25" > hollow shaft quadrature encoder, 2000ppr with L-D output. Anyone know a good > source Avago, US Digital and Renco come to mind. By hollow-shaft, do you mean "kit" encoders? Real hollow-shaft encoders with bearings are quite expensive, BEI and Danaher come to mind. The Kit encoders have a free-floating wheel that is supported by a shaft on the motor or machine, and have no bearings. They are much cheaper due to this. You can search on Digi-Key, Mouser and Avnet. Renco has been bought out by Heidenhain, but they are still available.
Watch out for the CUI AMT-10x encoders at Digi-Key, they have a lag responding to acceleration, and may not be well-suited to CNC systems such as EMC2. Jon ------------------------------------------------------------------------------ Systems Optimization Self Assessment Improve efficiency and utilization of IT resources. Drive out cost and improve service delivery. Take 5 minutes to use this Systems Optimization Self Assessment. http://www.accelacomm.com/jaw/sdnl/114/51450054/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users