On Sun, 22 Apr 2012 20:48:56 +0100, you wrote: >On 22 April 2012 16:07, Michael Haberler <mai...@mah.priv.at> wrote: >> gents, you are busily inventing path queueing mechanism number 3. The >> existing ones are: CRC offset curve aka queued_canon, and NCD aka >> chained_points. > >I think CRC is "Cutter Radius Compensation" and NCD os "Naive CAM detection"? >I suspect that very few people know enough about how LinuxCNC works >now to realise that is what it being implied. However, my >understanding was that we were talking about ways to "fix" the >existing behaviour. > >> I would also think the effort is considerable, and would not necessarily >> recommend grafting this onto the current code. But then it's time to start >> collecting ideas for Linuxcnc3. > >I think this is the approach to take, and it probably ought to include >(at the least) the changes in ja3 too. > >However, I don't think anyone has EMC3 as a trademark, we could change >the name back :-)
What the f^^^ is ja3? Is it any wonder that Joe Public has such a poor opinion of EMC/LinuxCNC!! - I've been here 4 years and you've yet to convince me it's not a closed shop speaking in a secret language. Sigh... Steve Blackmore -- ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users