On 14 December 2012 20:19, Viesturs Lācis <viesturs.la...@gmail.com> wrote:
> For example, today I started the system up, all 4 motors had set > bldc.value = 0.15; motors 0 and 1 were spinning, 2 and 3 were standing > still. I tried to get them spinning too by changing bldc cfg=h and > later also to cfg=n. Well, those motors started to turn, but 0 and 1 > did not. Even more - turning them by hand did not reflect any change > in encoder.0.rawcounts and in encoder.1.rawcounts. Were 0 and 1 running on the Hall sensors or on the encoder when they were working? -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial Remotely access PCs and mobile devices and provide instant support Improve your efficiency, and focus on delivering more value-add services Discover what IT Professionals Know. Rescue delivers http://p.sf.net/sfu/logmein_12329d2d _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users