On 14 December 2012 20:46, Viesturs Lācis <viesturs.la...@gmail.com> wrote:
> Motors have 1000 CPR encoders. If I turn motor one turn in one > direction, rawcounts pin increments approximately by 4000, That might be correct. > if I turn > it one turn in opposite direction, it also increments by different > number (it is changing, mostly in 2000-3000 range). But that sounds wrong. > The thing is that then LinuxCNC does not report any signal > received at all. The cable was checked and it is ok. It sounds like you definitely need some sort of oscilloscope. -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ LogMeIn Rescue: Anywhere, Anytime Remote support for IT. Free Trial Remotely access PCs and mobile devices and provide instant support Improve your efficiency, and focus on delivering more value-add services Discover what IT Professionals Know. Rescue delivers http://p.sf.net/sfu/logmein_12329d2d _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
