andy That does seem to be what you are seeing. However I just tried a test 200mm move and a 32.8mm radius circle and they both took the same length of time Do you get the same result? (I was running in a sim, so it might not be a valid test)
steve 100 G0 G21 G17 G90 G40 G49 G80 N110 G91.1 N120 G1 Z20.000 F3600.0 N130 T1 M06 N140 (End Mill {6 mm}) N150 G43H1 Z20.000 N160 S12000 M03 N170(Toolpath:- Profile 1) N180() N190 G64 N200 G1 X0.000 Y0.000 F3600 N210 G0 X-1.974 Y8.147 Z6.000 N220 G1 X-1.974 Y8.147 Z-1.000 F1200.0 N230 G2 X-1.346 Y40.813 I1274.739 J-8.173 F3600.0 n200 f=3600 (rapid??? is this the machines max velocity??) n220 f1200 thats the feed n230 f3600 these are consistent with andys observations I.E the machine is doing what its programmed to but here is what i dont know if the 3600 is the max feed then can the machine interpolate at that speed??? -- jeremy youngs ------------------------------------------------------------------------------ Precog is a next-generation analytics platform capable of advanced analytics on semi-structured data. The platform includes APIs for building apps and a phenomenal toolset for data science. Developers can use our toolset for easy data analysis & visualization. Get a free account! http://www2.precog.com/precogplatform/slashdotnewsletter _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users