John See my prev post to chris. All is working now,on to the next problem. Thank you.
On 07/02/14 18:13, John Thornton wrote: > Sorry, work is pressing... I noticed the Subject says Gui3 and you > downloaded Gui8? Which one are you working on? > > I'll try and test with master this evening. > > JT > > > On 2/7/2014 8:49 AM, Mark Tucker wrote: >> Andy >> >> I tried as below and everything shows as False. >> I have re-downloaded johns example files from >> http://gnipsel.com/linuxcnc/gui/gui08a.html >> I have re installed them and the gui shows fine but the power button is >> greyed out which is exactly what my gui is doing. >> >> I have just altered back to axis using the same ini and hal file and >> axis powers up no problem. >> >> On 07/02/14 14:12, andy pugh wrote: >>> On 7 February 2014 13:57, Mark Tucker <m...@rmtucker.f2s.com> wrote: >>> >>>> I had already changed the comment to your version but i still have the >>>> same results. >>>> Everything works fine with axis and Gscreen but it will not work with my >>>> custom Gui. >>> You probabl need to have a look at the machine status. I find it most >>> convenient to open a terminal (ssh works too) and >>> halcmd -kf >>> show pin *machine* >>> >>> For example will show the status of machine-is-on etc. >>> >>> Does the button start active and de-activate? You might only need to >>> set it to active in Glade. Or it might be being disabled by underlying >>> Python code. >>> >> ------------------------------------------------------------------------------ >> Managing the Performance of Cloud-Based Applications >> Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. >> Read the Whitepaper. >> http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ > Managing the Performance of Cloud-Based Applications > Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. > Read the Whitepaper. > http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ Managing the Performance of Cloud-Based Applications Take advantage of what the Cloud has to offer - Avoid Common Pitfalls. Read the Whitepaper. http://pubads.g.doubleclick.net/gampad/clk?id=121051231&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
