On 07/16/2014 04:35 PM, a k wrote: > I did input >> ># Read home switch inputs from I/O card. > net x-home-sw <= hm2_[HOSTMOT2](BOARD).0.gpio.026.in > net y-home-sw <= hm2_[HOSTMOT2](BOARD).0.gpio.030.in > net z-home-sw <= hm2_[HOSTMOT2](BOARD).0.gpio.034.in
Did you change the *example* HOSTMOT2 and BOARD strings to match the actual hardware in your system? This *sample* for my hardware shows the commands that dump the names: http://softsolder.com/2013/06/17/mesa-5i25-7i76-hal-pins/ I believe there's a period (.) missing before the BOARD part of the identifier in what you have written. This seems more likely: hm2_5i25.0.gpio.032.in However, that's for my system, not yours, and you must modify the *examples* to match your actual hardware. -- Ed softsolder.com ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
