It working!!!! problem was space before and after sign <= home switch are working on all axis
thank you to all help!!!! aram On Thu, Jul 17, 2014 at 11:43 AM, a k <[email protected]> wrote: > i use > > > > > # Read home switch inputs from I/O card. > net x-home-sw <= hm2_5i20.0.gpio.026.in > net y-home-sw <= hm2_5i20.0.gpio.030.in > net z-home-sw <= hm2_5i20.0.gpio.034.in > > and this > > # Connect home switch nets to motion. > net x-home-sw => axis.0.home-sw-in > net y-home-sw => axis.1.home-sw-in > net z-home-sw => axis.2.home-sw-in > > error--'net' requires at least one pin. none given > ///////////////////////////////////////////////////// > i do try everything- what i see in e-mail > > > > > On Thu, Jul 17, 2014 at 9:38 AM, Ed Nisley <[email protected]> wrote: > >> On 07/16/2014 04:35 PM, a k wrote: >> > I did input >> >> ># Read home switch inputs from I/O card. >> > net x-home-sw <= hm2_[HOSTMOT2](BOARD).0.gpio.026.in >> > net y-home-sw <= hm2_[HOSTMOT2](BOARD).0.gpio.030.in >> > net z-home-sw <= hm2_[HOSTMOT2](BOARD).0.gpio.034.in >> >> Did you change the *example* HOSTMOT2 and BOARD strings to match the >> actual hardware in your system? >> >> This *sample* for my hardware shows the commands that dump the names: >> >> http://softsolder.com/2013/06/17/mesa-5i25-7i76-hal-pins/ >> >> I believe there's a period (.) missing before the BOARD part of the >> identifier in what you have written. This seems more likely: >> >> hm2_5i25.0.gpio.032.in >> >> However, that's for my system, not yours, and you must modify the >> *examples* to match your actual hardware. >> >> -- >> Ed >> softsolder.com >> >> >> ------------------------------------------------------------------------------ >> Want fast and easy access to all the code in your enterprise? Index and >> search up to 200,000 lines of code with a free copy of Black Duck >> Code Sight - the same software that powers the world's largest code >> search on Ohloh, the Black Duck Open Hub! Try it now. >> http://p.sf.net/sfu/bds >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > ------------------------------------------------------------------------------ Want fast and easy access to all the code in your enterprise? Index and search up to 200,000 lines of code with a free copy of Black Duck Code Sight - the same software that powers the world's largest code search on Ohloh, the Black Duck Open Hub! Try it now. http://p.sf.net/sfu/bds _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
