if you have skype give me a call , if your near the machine , and we can sort this out once and for all
On 18 September 2014 17:34, David Armstrong <[email protected]> wrote: > 2.6.3 is fine > what type of encoder are you using ? , > if you open hal configuration , and then look at the count , and turn the > spindle you should see it increase > > > On 18 September 2014 17:20, <[email protected]> wrote: > >> This seems to be pointing to one issue, when I do this in the open loop >> test, the box that displays "hm2_5i25.0.encoder.00.position" just jumps >> between 0 and 0.00025 regardless of whether I have "single input encoder" >> checked. >> >> Still not being able to get any spindle operation at all from LinuxCNC >> makes me wonder if there is some bug in 2.6.3 >> >> >> ------Original Mail------ >> From: "andy pugh" <[email protected]> >> To: "Enhanced Machine Controller (EMC)" <[email protected]> >> Sent: Thu, 18 Sep 2014 15:07:21 +0100 >> Subject: Re: [Emc-users] New to LinuxCNC and PnCConf and need some help... >> >> On 18 September 2014 14:56, <[email protected]> wrote: >> > I figured I'd just get the spindle running at a known speed and put a >> frequency counter on it to calculate CPR >> >> It's easier just to reset the encoder, then turn the spindle through >> one turn, and see what the number is. >> >> >> -- >> atp >> If you can't fix it, you don't own it. >> http://www.ifixit.com/Manifesto >> >> >> ------------------------------------------------------------------------------ >> Want excitement? >> Manually upgrade your production database. >> When you want reliability, choose Perforce >> Perforce version control. Predictably reliable. >> >> http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users >> >> >> >> ------------------------------------------------------------------------------ >> Want excitement? >> Manually upgrade your production database. >> When you want reliability, choose Perforce >> Perforce version control. Predictably reliable. >> >> http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > ------------------------------------------------------------------------------ Slashdot TV. Video for Nerds. Stuff that Matters. http://pubads.g.doubleclick.net/gampad/clk?id=160591471&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
