did you change the jumpers on the 7i76 ?
On 18 September 2014 17:35, David Armstrong <[email protected]> wrote: > if you have skype give me a call , if your near the machine , and we can > sort this out once and for all > > On 18 September 2014 17:34, David Armstrong <[email protected]> wrote: > >> 2.6.3 is fine >> what type of encoder are you using ? , >> if you open hal configuration , and then look at the count , and turn the >> spindle you should see it increase >> >> >> On 18 September 2014 17:20, <[email protected]> wrote: >> >>> This seems to be pointing to one issue, when I do this in the open loop >>> test, the box that displays "hm2_5i25.0.encoder.00.position" just jumps >>> between 0 and 0.00025 regardless of whether I have "single input encoder" >>> checked. >>> >>> Still not being able to get any spindle operation at all from LinuxCNC >>> makes me wonder if there is some bug in 2.6.3 >>> >>> >>> ------Original Mail------ >>> From: "andy pugh" <[email protected]> >>> To: "Enhanced Machine Controller (EMC)" <[email protected] >>> > >>> Sent: Thu, 18 Sep 2014 15:07:21 +0100 >>> Subject: Re: [Emc-users] New to LinuxCNC and PnCConf and need some >>> help... >>> >>> On 18 September 2014 14:56, <[email protected]> wrote: >>> > I figured I'd just get the spindle running at a known speed and put a >>> frequency counter on it to calculate CPR >>> >>> It's easier just to reset the encoder, then turn the spindle through >>> one turn, and see what the number is. >>> >>> >>> -- >>> atp >>> If you can't fix it, you don't own it. >>> http://www.ifixit.com/Manifesto >>> >>> >>> ------------------------------------------------------------------------------ >>> Want excitement? >>> Manually upgrade your production database. >>> When you want reliability, choose Perforce >>> Perforce version control. Predictably reliable. >>> >>> http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk >>> _______________________________________________ >>> Emc-users mailing list >>> [email protected] >>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> >>> >>> >>> ------------------------------------------------------------------------------ >>> Want excitement? >>> Manually upgrade your production database. >>> When you want reliability, choose Perforce >>> Perforce version control. Predictably reliable. >>> >>> http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk >>> _______________________________________________ >>> Emc-users mailing list >>> [email protected] >>> https://lists.sourceforge.net/lists/listinfo/emc-users >>> >> >> > ------------------------------------------------------------------------------ Slashdot TV. Video for Nerds. Stuff that Matters. http://pubads.g.doubleclick.net/gampad/clk?id=160591471&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
