On 14 April 2015 at 13:27, Marius Liebenberg <mar...@mastercut.co.za> wrote: > It depends on what daughter cards are connected and if you use a sserial > expansion card. As far as I know the standard firmware that it comes > with is good enough for most configurations but I had to load something > else due to the fact that I fitted a 7i44 and my firmware was old.
That rather depends on what "standard" firmware you have. >From what Rick says later it looks like "rmsvss6_8.bit" That does appear to have PWM modules, on pins 11 to 23 of the first connector. http://git.linuxcnc.org/gitweb?p=hostmot2-firmware.git;a=blob;f=PIN_RMSVSS6_8_72.vhd;h=833d718d316c690eaaf5bb3bfe6ec84bcc56ef89;hb=HEAD -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ BPM Camp - Free Virtual Workshop May 6th at 10am PDT/1PM EDT Develop your own process in accordance with the BPMN 2 standard Learn Process modeling best practices with Bonita BPM through live exercises http://www.bonitasoft.com/be-part-of-it/events/bpm-camp-virtual- event?utm_ source=Sourceforge_BPM_Camp_5_6_15&utm_medium=email&utm_campaign=VA_SF _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
