On Saturday 16 May 2015 09:54:14 Jon Elson wrote: > On 05/16/2015 04:41 AM, Gene Heskett wrote: > > A hole that I presume is actually centered and can be used to > > register it? That would be a nice touch. ;-) > > I would not trust it! The powder sintered pulleys I got > were visibly out of center,
I would be afraid of that, but visibly off, yee gods! > which didn't matter as I was > turning them on the lathe, holding the OD in rings in the chuck. > > Jon Precisely why I posted the snide remark, Jon. I should have added a frownie. :-( But I fear that my 4 jaw, independent, is not the chuck to use unless I want to trust the DRO, so I can mount the indicator on the cross slide, and back it out of the way of a passing jaw as I'm playing with the tensions for that final bit of eccentricity removal. That sort of thing needs a 6 jaw scroller, and they need a BIG red wagon load of rolled quarters to put a quality one on my property. :-( Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
