I use nothing but a 4 jaw chuck and find it fast to get accurate centering of a part. I mount a dial indicator on a tool holder and put in my BXA holder. Real fast to use. I can take a photo of my set up if you want to see it.
JT On 5/16/2015 9:11 AM, Gene Heskett wrote: > But I fear that my 4 jaw, independent, is not the chuck to use unless > I want to trust the DRO, so I can mount the indicator on the cross > slide, and back it out of the way of a passing jaw as I'm playing with > the tensions for that final bit of eccentricity removal. That sort of > thing needs a 6 jaw scroller, and they need a BIG red wagon load of > rolled quarters to put a quality one on my property. :-( Cheers, Gene > Heskett ------------------------------------------------------------------------------ One dashboard for servers and applications across Physical-Virtual-Cloud Widest out-of-the-box monitoring support with 50+ applications Performance metrics, stats and reports that give you Actionable Insights Deep dive visibility with transaction tracing using APM Insight. http://ad.doubleclick.net/ddm/clk/290420510;117567292;y _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
