> On 07/20/2017 09:35 AM, andy pugh wrote: > > On 19 July 2017 at 19:34, Nicklas Karlsson <nicklas.karlsso...@gmail.com> > > wrote: > > > >> I have read thru the documentation and do not find it. > > > > I don't know if they have documentation. That's why you were told to > > talk to them or look at their code. I think that they were planning to > > replace NMP with 0MQ. I don't know if they did. > > But the normal use-state for Machinekit is to use a Beaglebone black > > for the realtime, (because they are cheap?) then use a normal PC for > > the GUI because the BBB has appalling graphics. > > > > Look here for how machinekit does it. > > http://machinekoder.com/machinetalk-explained-part-3-technologies/
I read and they have or are working on replacing the protocol. Activity in machinekoder repository for cnc machine seems rather low. The blocks will stay the same and they seems to work in good direction but I am unsure how far they have come. To split user interface from real time is not a new idea, I think one of my old machines around 30 years old use this concept internally. Nicklas Karlsson ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
