On Fri, 19 Apr 2019 at 13:41, andy pugh <bodge...@gmail.com> wrote: > On Fri, 19 Apr 2019 at 12:36, Roland Jollivet <roland.jolli...@gmail.com> > wrote: > > > > Solid “collets” and off-the-shelf nuts seem so obvious that I am > puzzled > > > that I have never found them. It solves the tool length puzzle at a > stroke. > > > > > > > > If this is for your BT30 system, making a solid collet is almost making a > > BT30 holder.. > > No, clearly for BT30 this is a solved problem. I was thinking about > what could be done for those unfortunates who were daft enough to buy > a spindle with a collet end rather than something usable. > > mmm.. And if you look at something like this, it should be disallowed from being called a spindle; https://www.banggood.com/ER11-Chuck-CNC-500W-Spindle-Motor-with-52mm-Clamps-and-Power-Supply-Speed-Governor-p-1027937.html
Basically a motor, then a sleeve, then an ER11 collet <https://lists.sourceforge.net/lists/listinfo/emc-users> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users