On Wednesday 19 February 2020 14:29:42 dave engvall wrote: > Lots of illocut products on web... which one do you recommend? > > Indeed kerosene works well for threading Al and cutting. Probably less > flammable also but being lazy I didn't check the flashpoints. > The highest flashpoint stuff I've fed a mister is safflower oil, sold as cooking oil in the grocery stores.. Worked great squaring up a huge block of dead soft alu that I was making to space a bearing on down the shaft about 1.5" to get away from a worn spot created by the eccentric collar of a fafner bearing, but it made such a mess of the area to clean up that I've never made that mistake again. > Dave > > On 2/19/20 11:05 AM, Marshland Engineering wrote: > > Ilocut is far superior to WD40. If I could send samples, I would > > send some. > > > > > > > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users
Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) If we desire respect for the law, we must first make the law respectable. - Louis D. Brandeis Genes Web page <http://geneslinuxbox.net:6309/gene> _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
