On Sat, 7 Mar 2020, Leonardo Marsaglia wrote:
Date: Sat, 7 Mar 2020 21:45:21 -0300 From: Leonardo Marsaglia <ldmarsag...@gmail.com> Reply-To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Subject: Re: [Emc-users] 6i24 + 7i44 configurationThank you very much Peter!
I succeeded making the 7i70 work, I could read inputs and it worked ok. But, when I unloaded the configuration I couldn't make it work since. I rebooted the PC several times but it's now working anymore. The hm2_pci driver is detecting the 7i70 because I can see the pins in HAL, but when I start the thread to test communication, the GREEN LED flashes quickly for a couple of seconds and then the RED LED turns on. The first time the board worked the green led flashed at 1 hz like the manual says.
probably the most common situation is if the card is detected and you get a fault later (red light) its a sserial card or host card watchdog bite.
Are you using a normal hal file and running LinuxCNC? If so do you get any error messages?
I've checked the voltages and they seem ok. I'm feeding the 7i70 with 12 volts and since I'm testing I'm connecting FIELD POWER to VIN. Do you know what can cause this?
_______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users Peter Wallace Mesa Electronics _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
