I went through the technical manual, and found the variables to tweek to enable the resistor braking. On the Yasawa they seem to be: L30-04 = 3 L8-01 = 1 then I set: C1-02 for .2 (sec) deceleration
Oh boy, what a difference the correct settings make! Thank you for getting back Scott! --J. Ray Mitchell Jr. jrmitche...@gmail.com "Good enough is the enemy of excellence"author unknown On Sun, Aug 23, 2020 at 11:50 AM Scott Harwell via Emc-users < emc-users@lists.sourceforge.net> wrote: > See page 72 of manual for breaking resistor config. > Scott > > On Tuesday, August 18, 2020, 12:17:35 PM CDT, jrmitchellj < > jrmitche...@gmail.com> wrote: > > Hi Scott. > I have a Yaskawa V1000 on my spindle, and have installed a encoder on the > spindle. > Would you share what settings in the V1000 to get rigid tapping working > well? I have braking resistors installed, but don't know what variable to > change to bring them into play. > > Any help & tips always welcome! > > --J. Ray Mitchell Jr. > jrmitche...@gmail.com > > > > _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
