I use Alibre Atom 3D CAD package which I find excellent and is a very cheap one time purchase. There is a CAM package too but it’s more expensive.

I used to use Fusion 360 but they stopped my free licence when they looked at my website and found I did some ‘job shopping’ _regardless of turn over_. I wasn’t prepared to pay the $50 per month so I lost all my Fusion drawings. Be careful!!!

I am a newbie to CNC machining but like Andy and the others say it’s best and quite easy to learn G-Code and routines for turning especially once you have a few templates you can just modify.

Andy’s macro addon to LCNC axis is very good too.

Pete

On 16 Sep 2020, at 11:44, N <nicklas.karlsso...@gmail.com> wrote:


Hello,
I have been using freecad for designing parts, and then milling them on
a sherline mill, getting the hang of that a little bit.
I have a lathe too, that works with CNC linux, but noticed heard, that you can't really make parts, or g-codes, with it for a lathe.

Also used Freecad a little bit. Suspect rotating a sketch is a good or very good method to draw parts for a lathe. Do know anything about how CAM, the path workbench will work a lathe but should be simple to try.

As someone pointed out Fusion 360 might be better but CAD software usually also tend to be rather expensive.


Regards Nicklas Karlsson


_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users


--
This email has been checked for viruses by AVG.
https://www.avg.com

_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to