Dennis;

The motor I have for my 72 Vega has a "Steel V Ring Commutator".
Can you educate us on the differences between this motor and a normal ADV or 
Warp DC motor.

Thanks;

Dennis                                             
Elsberry, MO                               
http://www.evalbum.com/1366 
http://evalbum.com/3715                                              



-----Original Message-----
From: EV [mailto:ev-boun...@lists.evdl.org] On Behalf Of Dennis Miles via EV
Sent: Tuesday, August 05, 2014 2:47 PM
To: EVDL Administrator; Electric Vehicle Discussion List
Subject: Re: [EVDL] Hybrid Mustang: motorcycle drivetrain?

David, and others, the most fragile part, of a series DC motor, is the 
commutator. And that is, because the copper segments are glued to an insulating 
core. When the current is flowing, the segments heat up and soften the glue, 
then they are subjecting to "lifting," away from that insulating core, and 
causing problems with the brushes, resulting a need for an extensive repair. 
But, with no (or very low) current, the glue maintains its strength, and the 
motor can be spun to a higher RPM, without damage.

PS. added a new "You Tube" Link (Below)

Dennis Lee Miles

(*evprofes...@evprofessor.com <evprofes...@evprofessor.com>)*

* Founder:    **EV Tech. Institute Inc.*

*Phone #* *(863) 944-9913 (12 noon to 12 midnight Eastern US Time)*

*Educating yourself, does not mean you were **stupid; it means, you are 
intelligent enough,  **to know, that there is plenty left to learn!*

*          You Tube Video link:  http://youtu.be/T-FVjMRVLss
<http://youtu.be/T-FVjMRVLss> *

*    NEW You Tube Video link: *http://youtu. be/Pz9-TZtySh8
<http://youtu.%20be/Pz9-TZtySh8>


On Tue, Aug 5, 2014 at 5:25 AM, EVDL Administrator via EV <ev@lists.evdl.org
> wrote:

> On 4 Aug 2014 at 18:14, Ben Goren via EV wrote:
>
> > He says it's okay to spin the motors faster than 8000 RPM so long as 
> > it's not the controller that's sending the current to the motors 
> > that's doing the spinning.
>
> I wonder why this would be.
>
> David Roden - Akron, Ohio, USA
> EVDL Administrator
>
> = = = = = = = = = = = = = = = = = = = = = = = = = = = = = EVDL 
> Information: http://www.evdl.org/help/ = = = = = = = = = = = = = = = = 
> = = = = = = = = = = = = =
> Note: mail sent to "evpost" and "etpost" addresses will not reach me.  
> To send a private message, please obtain my email address from the 
> webpage http://www.evdl.org/help/ .
> = = = = = = = = = = = = = = = = = = = = = = = = = = = = =
>
>
> _______________________________________________
> UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
> http://lists.evdl.org/listinfo.cgi/ev-evdl.org
> For EV drag racing discussion, please use NEDRA (
> http://groups.yahoo.com/group/NEDRA)
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20140805/05c618f3/attachment.htm>
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
For EV drag racing discussion, please use NEDRA 
(http://groups.yahoo.com/group/NEDRA)

_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
For EV drag racing discussion, please use NEDRA 
(http://groups.yahoo.com/group/NEDRA)

Reply via email to