Waiting for the panadapter to completely "paint" itself before passing audio?
-Tim -----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of DL1FUX Sent: Thursday, July 08, 2010 1:38 PM To: [email protected] Subject: Re: [FlexEdge] TX/RX switching problem with changed pana-background Shure, but if that is 2,8 kByte or 4.2 kByte does not realy matter for that. And what has that to do with sound delay???? There is a function between no. of pixel in relation to seconds of sound missing. Not realy important but somewhat strange... 73, martin dl1fux Am 08.07.2010 19:22, schrieb Tim (W4TME): > I believe the images are intentionally small to make load times faster. > > -Tim > --- > W4TME > FlexRadio Systems - Info Management Admin. > "Tune in Excitement" > > On 7/8/2010 11:06 AM, DL1FUX wrote: >> Hi, >> >> shame on me! I decided to change the background picture >> (picDisplay.png) on the default-skin. >> I wanted my callsign to be displayed in right up corner. >> >> So I edited the picDisplay.png (100x50 pixel) and wrote my callsign >> in it. I wrote it back and because the background is being zoomed up >> to about 1400x700 pixel the letters became very muddy... >> >> So I did a new picture with about 600x300 pixel and this was >> displayed much smoother and nicer. >> And now my problems begann... >> >> If I pushed the ptt and than released it the panadapter showed up the >> received sigs again but sometimes no sound came from the speakers! >> After a few seconds (5 to 10) sound came back. >> >> I then changed the picDisplay.png to a new picture with 1600x800 >> pixel and then reproduceable every time no sound after ptt-release >> ever since... >> Changed back to 100x50 pixel and every thing works great again. >> >> 73, martin dl1fux >> >> >> >> _______________________________________________ >> Flexedge mailing list >> [email protected] >> http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz >> This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is >> used for posting topics related to SDR software development and >> experimentalist who are using alpha and beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software. _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using alpha and beta versions of the software.
