Thanks for the tip Thomas, I will look at it because I have one of the MS
Wheelmice. I have heard of other issues (unrelated) with it from other
members of the listserver. I will take a look for later drivers because I
think others had said this solved their other unrelated problems as well.
Brad Velander,
Lead PCB Designer,
Norsat International Inc.,
#300 - 4401 Still Creek Dr.,
Burnaby, B.C., V5C 6G9.
Tel. (604) 292-9089 direct
Fax (604) 292-9010
website www.norsat.com
> -----Original Message-----
> From: Thomas [mailto:[EMAIL PROTECTED]]
> Sent: Tuesday, June 26, 2001 5:39 PM
> To: 'Protel EDA Forum'
> Subject: Re: [PEDA] CLARIFICATION: Speed problem with Protel
> 99SE in PCB
> e ditor !
>
>
> I use winME as an OS with 99SE sp6 running on a 750MHz AMD
> Athlon with 128M
> RAM.
>
> I did have speed issues like you describe.
>
> I solved them by replacing my optical mouse (the type without
> a ball in the
> base) with a standard ball mouse.
> I now have no mouse or keyboard lag.
> If you're using one of these new fangled mices try replacing
> it with the
> standard type and please let us know if it helps.
>
> Tom.
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* To post a message: mailto:[EMAIL PROTECTED]
*
* To leave this list visit:
* http://www.techservinc.com/protelusers/subscrib.html
* - or email -
* mailto:[EMAIL PROTECTED]?body=leave%20proteledaforum
*
* Contact the list manager:
* mailto:[EMAIL PROTECTED]
*
* Browse or Search previous postings:
* http://www.mail-archive.com/[email protected]
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
