If you want to attempt it your self, make sure you use a good electronic iron and rosin core solder (don't use acid core). The connector is big, so you don't have to be too precise. Clean the flux off afterward with flux remover.
Better: Use solder with water-based flux and use a damp cloth to clean it. Most (all?) modern electronics is assembled with this type of solder, plastic parts aren't necessarily designed to cope with outgassing of those old rosin-remover solvents any more.
-- Lewin A.R.W. Edwards http://www.zws.com/ Learn how to build high-performance embedded systems on a budget! http://www.amazon.com/exec/obidos/ASIN/0750676094/zws-20
-- G-Books is sponsored by <http://lowendmac.com/> and...
Small Dog Electronics http://www.smalldog.com | Refurbished Drives | -- Check our web site for refurbished PowerBooks | & CDRWs on Sale! |
Support Low End Mac <http://lowendmac.com/lists/support.html>
G-Books list info: <http://lowendmac.com/lists/g-books.html> --> AOL users, remove "mailto:"; Send list messages to: <mailto:[EMAIL PROTECTED]> To unsubscribe, email: <mailto:[EMAIL PROTECTED]> For digest mode, email: <mailto:[EMAIL PROTECTED]> Subscription questions: <mailto:[EMAIL PROTECTED]> Archive: <http://www.mail-archive.com/g-books%40mail.maclaunch.com/>
---------------------------------------------------------------
The Think Different Store
http://www.ThinkDifferentStore.com ---------------------------------------------------------------
