Hi Waldemar, On Oct 28, 3:22 pm, Waldemar Kornewald <[EMAIL PROTECTED]> wrote: > Hi Jeff, > > On 28 Okt., 21:11, Jeff S <[EMAIL PROTECTED]> wrote: > > > > > > Our queries and indices are rather simple. I should clarify: > > > The particular problem I'm talking about is a view that currently has > > > a response time of about 360ms and almost all of the time (280ms) is > > > spent on datastore put()/fetch()/get(). IOW, runtime CPU usage is low. > > > If you only read data then 360ms would probably consume less than > > > 1500mcycles, but since this view primarily writes to the datastore it > > > consumes more than 10,000mcycles! That's really bothering me because I > > > already get yellow warnings for views that consume more than > > > 1000mcycles and here I have red warnings. How am I supposed to > > > implement a simple write operation if it eats mcycles so quickly? Can > > > I just ignore the warning since only runtime cpu counts and we > > > primarily consume datastore cpu in this case? > > > From your description, it sounds like the datastore CPU usage need not > > concern you. If the CPU Usage listed on the admin console is at an > > acceptable level and the logs do not contain large amounts of high CPU > > request warnings, then your app should be okay. > > Well, that's the problem. The dashboard shows a warning sign ("<!>") > and very high "Avg CPU" usage for that URL, but the logs don't mention > anything at all for that URL. So, which is more correct? The dashboard > or the logs? :)
The two are currently measuring different things. The CPU warning in the log is based on runtime CPU, while the displayed CPU warning in the log is based on runtime and datastore CPU. Thank you, Jeff > > Normally, if I consume too much CPU I get an explicit warning > *message* in the logs: > > 10-25 06:48AM 43.525 / 200 802ms 2754mcycles <!> 3kb > [...snip...] > This request used a high amount of CPU, and was roughly 2.6 > times over the average request CPU limit. High CPU requests have a > small quota, and if you exceed this quota, your app will be > temporarily disabled. > > As I said, that warning message doesn't appear. But if I print > something to the logs I can see in the header of the log entry that > the request consumes a huge amount of CPU (e.g., "15000mcycles <!>", > please note the "<!>" warning *sign*). Why do I *not* get a warning > *message* although I can provoke a warning *sign* if (and only if) I > print something to the logs? > > Also, why does the CPU quota usage go up and down so quickly? A few > minutes ago I had 40gcycles used and after I visited that high-CPU URL > four times it went up to 85gcycles and a few minutes later it went > back to 0. I thought this was a *24h* moving window? Don't get me > wrong. I don't mind quota usage going back to zero every few minutes > (or seconds would be fine, too). :) > > Thanks! > > Bye, > Waldemar Kornewald --~--~---------~--~----~------------~-------~--~----~ You received this message because you are subscribed to the Google Groups "Google App Engine" group. To post to this group, send email to google-appengine@googlegroups.com To unsubscribe from this group, send email to [EMAIL PROTECTED] For more options, visit this group at http://groups.google.com/group/google-appengine?hl=en -~----------~----~----~----~------~----~------~--~---