Hi Thomas,

I think our plan was to submit it to the Internet Area directly (Richard:
That is from memory, am I correct?)

Don



On 6/15/12 9:28 AM, "Thomas Heide Clausen" <i...@thomasclausen.org> wrote:

>
>On 15 Jun 2012, at 15:57, Don Sturek <d.stu...@att.net> wrote:
>
>> Hi Thomas (and Michael),
>> 
>> I don't agree that MLE targets only RPL.  The draft was written
>>carefully
>> to avoid having a narrow focus around RPL.  That said, the deployment we
>> are using this draft for uses 6LoWPAN, 6LoWPAN ND, ROLL RPL
>>(non-storing)
>> and I think many others will find the information exchanged between
>> neighbors using MLE as useful.
>> 
>> Don
>> 
>
>Hi Don,
>
>Note that I was replying to Michael's suggestions that MLE be married to
>RPL.
>
>If you think it's not, then MLE should neither be developed in ROLL nor
>be constrained by RPL code-points, messages or principles.
>
>
>Thomas
>
>> On 6/15/12 6:15 AM, "Thomas Heide Clausen" <i...@thomasclausen.org>
>>wrote:
>> 
>>> 
>>> On Jun 15, 2012, at 15:12 , Michael Richardson wrote:
>>> 
>>>> 
>>>>>>>>> "Thomas" == Thomas Heide Clausen <i...@thomasclausen.org> writes:
>>>>   Thomas> Not sure how fantastic (or not) it is - it is not
>>>>   Thomas> immediately clear to me how tied MLE should be to RPL - if
>>>>   Thomas> it truly aims at being for _MESH_ link establishment, then
>>>>   Thomas> it would appear to be a much larger scope, and should not be
>>>>   Thomas> tied narrowly to a special-purpose protocol's type-space (&
>>>>   Thomas> conventions etc., that do not apply universally).
>>>> 
>>>> Thomas, you will note that:
>>>> 1) I suggested it go under IPv6 ICMP first, and if there was such push
>>>>    back about allocating a new type, that RPL could allocate a
>>>> type/code.
>>>> 2) ZigBee alliance (the proposal), *IS* using RPL.
>>>> 
>>> 
>>> In that case, the draft must be very narrowly scoped and written such
>>> that it's clear that it's applicable _only_ to that context
>>> (special-purpose deployments of a special-purpose protocol), and
>>> specifically to not pretend to do general mesh link establishment.
>>> 
>>>> I see running it over UDP very architecturally strange.
>>> 
>>> I don't.
>>> 
>>> Thomas
>>> 
>>>> -- 
>>>> Michael Richardson <mcr+i...@sandelman.ca>, Sandelman Software Works
>>>> IETF ROLL WG co-chair.    http://datatracker.ietf.org/wg/roll/charter/
>>>> 
>>> 
>> 
>> 


--------------------------------------------------------------------
IETF IPv6 working group mailing list
ipv6@ietf.org
Administrative Requests: https://www.ietf.org/mailman/listinfo/ipv6
--------------------------------------------------------------------

Reply via email to