This is a church so saving money is why did not keep upgrading. If I had 2 matching 6 or 5 would have given those to them. The church has -0 or -1 whatever the P011Q 40406A is. I have dual monitors and wanted to program from scratch anyway. With 2 laptops and a beer pretty easy programming one screen to another but wanted comfort of office or home not comm room. Otherwise will do it onsite but software runs flaky on my DOS program. Tried modem but never got them to sync john
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Charles Patterson Sent: Friday, June 01, 2012 11:39 AM To: Panasonic KX-T telephone system discussion list Subject: Re: KX-T: TD1232 I didn't quite understand everything you were trying to say exactly... Is the dual cabinet a -3 or 0 or 1 (I can't look up the software numbers)? If it is -3 then you should be able to use the windows tool on it. I find the dos tool unusable any more. It always locks up when I try to save information from the ksu. If the cabinets are older and you are trying to upgrade them, you are probably better off starting from scratch. Also, if it is a dual cabinet, you should consider upgrading to a -5 or -6, with those versions they fixed the issue where you needed to disconnect all extensions and co lines for 5 minutes while doing ANY reboot. I recently upgraded a -1 to a -4 and had to use the dos tool to just view the settings, I could do that, but I could not save anything, then I input the data manually into the newer unit. Charles Charles Patterson [email protected] Patterson Communications, Inc. Tarrytown, NY 914-366-0291 ext.101 On Fri, Jun 1, 2012 at 10:24 AM, John Mcneill <[email protected]> wrote: > > This 1 will reach out to the elite dealers. Got dual cabinet td1232 > P011Q 40406A Master / P011Q 40406A Slave. My DOS E1232A program > crashes my computer when try to file transfer to save file on laptop. > Dash 3 was out when I started so do not have any older manuals or > versions of DOS to try. I have 3 Dash 3 cabinets to replace existing > for TVA50 voice mail install. 817 is not the baud rate program on a > dash 0 or 1 cabinet. Thought might try download over modem but it > sings with each other then drops the line. Guess I will keep guessing till someone knows baud setting program number. > Can I upload existing programming to the Dash 3 cabinet? > > Thank you, > John McNeill > Cable-Net Communications Corporation > 210-657-9273 > [email protected] > > > > _________________________________________________________________ > KX-T Mailing list --- http://kxthelp.com/ Subscription changes: > http://kxthelp.com/mailman/listinfo/kxt _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt _________________________________________________________________ KX-T Mailing list --- http://kxthelp.com/ Subscription changes: http://kxthelp.com/mailman/listinfo/kxt
