G;day Clay, I'm assuming, when you say plastic, that you're talking about a wire hanger that is encased in plastic?
Woops! Yes, that's right - almost too light weight to hold any clothes and easily bent with pliers. Just make a "U" shape at the end of the longer bit (which is the bit on the angle, not the flat bottom)
David
Clay
Clay Blackwell [EMAIL PROTECTED]
> [Original Message] > From: David Collyer <[EMAIL PROTECTED]>
> There's an even better way which works in a similar fashion. Got to your > supermarket and buy a bunch of those very cheap plastic coat-hangers (we > can get about 10 for $1 here). Then with wire cutters or pliers, simply cut > each one in half, throwing away the hook bit. Now bend the cut end to make > each half into a giant safety pin shape.
- To unsubscribe send email to [EMAIL PROTECTED] containing the line: unsubscribe lace [EMAIL PROTECTED] For help, write to [EMAIL PROTECTED]
- To unsubscribe send email to [EMAIL PROTECTED] containing the line: unsubscribe lace [EMAIL PROTECTED] For help, write to [EMAIL PROTECTED]
