---- Clay Blackwell <[email protected]> wrote: 
I think with my Midlands, there is more lattitude.  But since the bobbins are 
mostly shaped the same, and have spangles that are consistent in size (my OCD 
again??), I don't have as much trouble with differences. ----

Human physiology is such that, the smaller or lighter-weight an object is, the 
smaller the detectable difference.  So two binche bobbins need to be quite 
similar in size and weight to feel the same.  Midlands are larger and heavier 
to begin with, so the difference must be larger to be felt.

My impression is that fast lacemakers require more uniformity among their 
bobbins than slower lacemakers.  I don't have any problem with differences in 
size and shape (within reason), but I'm quite slow.  I'm not looking at the 
bobbins while grabbing and moving them (although one reason I'm slow is that I 
do stop to look at them and admire their beauty!), but I'm not "thrown" when a 
bobbin is a different size/weight/shape from what I just put down.  I think the 
really fast lacemakers are just too efficient, so relatively slight variations 
interfere noticeably with their efficiency.  I'm so inefficient that I can 
absorb the differences without noticing any slowdown.

I also think those who work with very fine threads have to have more uniformity 
among their bobbins.  Slight differences in tensioning are not noticeable with 
heavier thread (I do get praise for the uniformity of my tension, but I tug 
pretty strongly), but finer thread takes very little tension, so slight 
differences are more noticeable the same as slight differences in weight are 
more noticeable when the weight is small.

Robin P.
Los Angeles, California, USA
[email protected]

-
To unsubscribe send email to [email protected] containing the line:
unsubscribe lace [email protected]. For help, write to
[email protected]

Reply via email to