> I suspect that either your hard disk or a floppy disk is mounted. Frome
> your LRP console exit the LRP menu and type df. You should only see
> /dev/ram0 mounted you should be able to backup. if some other device
> shows up (which I suspect) umount it (cd / then umount
> /whateverdirectory which is mounted ) and it should go.
> By the way since you are the happy owner of an IDE flash disk your
> install procedure should be as follow:
> 1/ copy libz.lrp ssh.lrp and sshd.lrp on your IDE disk
> 2/ include the 3 packages in syslinux.cfg. Save syslinux.cfg.
> 3/ reboot
> 4/ run makekey from the console
> 5/ backup sshd (this time it should work since you have not mounted
> anything)
> 6/ remove sshkey.lrp from your disk and from syslinux.cfg
>
> I'll update the install manual to clarify all this over the week-end.
>
> Bonsoir
> Jacques
You were right about that one too... that worked for me..
Merci beaucoup pour votre temps et votre aide...
Charles-Etienne Dubé
_______________________________________________
Leaf-user mailing list
[EMAIL PROTECTED]
http://lists.sourceforge.net/lists/listinfo/leaf-user
