Date: Sun, 1 May 2005 18:54:40 EDT
From: [EMAIL PROTECTED]
Subject: Re: [LIB] Libretto floppy drive install?
In a message dated 5/1/2005 3:54:58 PM Mountain Daylight Time,
[EMAIL PROTECTED] writes:
<snip>
> The FDD
> doesn't seem to be very particular about drivers.
>
> But it seems any of the drivers we've mentioned should install fine by going
> through the process I outlined. I've don't recall running any such .bat
> file as John described.
>
> Matt
>
I guess I would disagree. When I set up W98se on my L100, the floppy drive
was unusable except under DOS - and I had installed the W95 utilities package -
until I installed the W98 L110 FDD driver.
This FDD driver listed under the L110 drivers at the Tosh site has been used
on even the L50/70 running W98, IIRC, by some listers in the past (Neil?).
It's functionality is not exclusive to the L110, or the L1xx series, apparently.
There's no .bat file to run for this L110 FDD driver, just unzip it, read the
readme, do what it says to do - voila! But as usual, if there are any other
FDD drivers installed ahead of it, they must be deleted ("removed") through
Device Manager first, otherwise bad things will transpire.
Lee
