Hallo Frithjof, was für einen Chipsatz hat dein Laptop?
Bei unseren Laptops hatten mal folgende Kerneloptionen geholfen: KernelOptions = dhcpretry=5 mtu=1492 keine Ahnung, ob das auch bei dir hilft. Viele Grüße Ralf KKS-Esslingen Am 25.08.2015 um 13:37 schrieb Frithjof Hammer:
Hallo Liste! Ich habe ein Win7 Notebook, dass linboisiert werden soll. Linbo startet u.a. von der Festplatte ganz wunderbar. Weise ich Linbo an, Windows zu starten, wird grub gestartet und bleibt dann in seinem Terminal hängen. Gebe ich dort ein chainloader +1 boot startet das Windows. Grundsätzlich geht es also. Wenn ich das richtig sehe, versucht Linbo so etwas: chainloader bootmgr Dies wird von Grub mit "unknown binary format" quittiert. Da scheint das Problem zu liegen Kennt jemand dieses Problem und weiß, wie ich hier ansetzten kann? Gruß Frithjof Hier noch die Start.conf: # Windows 7 auf Partition 1 (NTFS) # Ubuntu 12.4 auf Partition 2 # Swap auf Partition 3 # Cache auf Partition 5 [LINBO] # globale Konfiguration Cache = /dev/sda5 # lokale Cache Partition Server = 10.16.1.1 # IP des TFTP-Servers, der Images vorhaelt Group = elitebook RootTimeout = 600 # automatischer Rootlogout nach 600 Sek. AutoPartition = no # automatische Partitionsreparatur beim LINBO-Start AutoFormat = no # kein automatisches Formatieren aller Partitionen beim LINBO-Start AutoInitCache = no # kein automatisches Bef�llen des Caches beim LINBO-Start DownloadType = torrent # Image-Download per torrent|multicast|rsync, default ist rsync BackgroundFontColor = white # Bildschirmschriftfarbe (default: white) ConsoleFontColorStdout = lightgreen # Konsolenschriftfarbe (default: white) ConsoleFontColorStderr = orange # Konsolenschriftfarbe f�r Fehler-/Warnmeldungen (default: red) [Partition] # Start einer Partitionsdefinition, Windows 7 auf NTFS Dev = /dev/sda1 # Device-Name der Partition (sda1 = erste Partition auf erster Platte) Size = 120000000 # Partitionsgroesse in kB (Bsp.: ca. 30G) Id = 7 # Partitionstyp (83 = Linux, 82 = swap, c = FAT32, 7 = NTFS, ...) FSType = ntfs # Dateisystem auf der Partition (NTFS) Bootable = no # Bootable-Flag [Partition] # Start einer Partitionsdefinition, Ubuntu Dev = /dev/sda2 # Device-Name der Partition (sda2 = zweite Partition auf erster Platte) Size = 25000000 # Partitionsgroesse in kB (Bsp.: ca. 10G) Id = 83 # Partitionstyp (83 = Linux, 82 = swap, c = FAT32, 7 = NTFS, ...) FSType = ext4 # Dateisystem auf der Partition (ext4) Bootable = no # Bootable-Flag [Partition] # Definition der Swappartition Dev = /dev/sda3 # Device-Name der Partition (sda3 = dritte Partition auf erster Platte) Size = 4000000 # Partitionsgroesse in kB (Bsp.: ca. 2G) Id = 82 # Partitionstyp (83 = Linux, 82 = swap, c = FAT32, ...) FSType = swap # Dateisystem auf der Partition (swap) [Partition] # Erweiterte Partition Dev = /dev/sda4 # Device-Name der Partition (sda4 = vierte Partition auf erster Platte) Size = # Partitionsgroesse in kB (leer bei erweiterter Partition) Id = 5 # Partitionstyp (5 = erweiterte Partition) FSType = # Dateisystem auf der Partition (leer bei erweiterter Partition) Bootable = no # Bootable-Flag [Partition] # Definition der Cache-Partition Dev = /dev/sda5 # Device-Name der Partition (sda6 = sechste Partition auf erster IDE-Platte) Size = # Partitionsgroesse in kB (Bsp.: keine Angabe = Rest der Platte, ca. 38G) Id = 83 # Partitionstyp (83 = Linux, 82 = swap, c = FAT32, ...) FSType = ext4 # Dateisystem fuer Cache-Partition (ext4) Bootable = no # Bootable-Flag [OS] # Beginn einer Betriebssystemdefinition Name = Windows 7 # Name des Betriebssystems Version = # Version (optional, frei waehlbar) Description = Windows 7 SP1 # Beschreibung IconName = winxp.png # Icon f�r die Startseite, muss unter /var/linbo/icons abgelegt sein Image = # kein differentielles Image definiert BaseImage = elitebook-win7.cloop # Dateiname des Basisimages (Erweiterung .cloop) Boot = /dev/sda1 # Partition, die Kernel & Initrd enthaelt Root = /dev/sda1 # Rootpartition, in die das BS installiert ist Kernel = grub.exe # Relativer Pfad zum Kernel, bei Windows immer grub.exe Initrd = # Relativer Pfad zur Initrd, bei Windows immer leer Append = # bleibt bei Windows leer StartEnabled = yes # "Start"-Button deaktiviert SyncEnabled = yes # "Sync+Start"-Button anzeigen NewEnabled = yes # "Neu+Start"-Button anzeigen Hidden = no # zeige OS-Reiter an Autostart = no # automatischer synchronisierter Start dieses Betriebssystems: yes|no DefaultAction = sync # DefaultAction bei Autostart: start|sync|new AutostartTimeout = 5 # Timeout in Sekunden f�r Benutzerabbruch bei Autostart [OS] Name = lubuntu # Name des Betriebssystems Version = # Version (optional) Description = Carl-Bosch-Linux # Beschreibung IconName = ubuntu.png # Icon f�r die Startseite, muss unter /var/linbo/icons abgelegt sein Image = # kein differentielles Image BaseImage = lubuntu-20131216.cloop.pups # Dateiname des Basisimages (Erweiterung .cloop) Boot = /dev/sda2 # Partition, die Kernel & Initrd enthaelt Root = /dev/sda2 # Rootpartition, in die das BS installiert ist Kernel = vmlinuz # Relativer Pfad zum Kernel Initrd = initrd.img # Relativer Pfad zur Initrd Append = ro splash # Kernel-Append-Parameter, ggf. anpassen StartEnabled = yes # "Start"-Button deaktiviert SyncEnabled = yes # "Sync+Start"-Button anzeigen NewEnabled = yes # "Neu+Start"-Button anzeigen Hidden = no # zeige OS-Reiter an Autostart = no # automatischer synchronisierter Start dieses Betriebssystems: yes|no DefaultAction = start # DefaultAction bei Autostart: start|sync|new AutostartTimeout = 5 _______________________________________________ linuxmuster-user mailing list linuxmuster-user@lists.linuxmuster.net https://mail.lehrerpost.de/mailman/listinfo/linuxmuster-user
_______________________________________________ linuxmuster-user mailing list linuxmuster-user@lists.linuxmuster.net https://mail.lehrerpost.de/mailman/listinfo/linuxmuster-user