On Mon, 2002-11-25 at 07:19, Delz wrote: > Hi, > > My ws001 configs in lts.conf looks like this. How do I disable NIS on the > client? Please help..... > > [ws001] > XSERVER = XF86_SVGA > X_MODE_0 = 1024x768 65 1024 1032 1176 1344 768 771 777 > 806 -hsync -vsync > XDM_SERVER = 172.16.0.9 > X_MOUSE_PROTOCOL = "PS/2" > X_MOUSE_DEVICE = "/dev/psaux" > X_MOUSE_RESOLUTION = 400 > X_MOUSE_BUTTONS = 3 > X_MOUSE_EMULATE3BTN = Y > LOCAL_APPS = Y > USE_NFS_SWAP = Y > SWAPFILE_SIZE = 128m > RUNLEVEL = 5 > > > Delz > Try service ypbind stop in a shell on the server and see if the same messages are generated. If you are using a single server it is not really necessary to use NIS. regards garry > > ----- Original Message ----- > From: "Ivan Pulleyn" <[EMAIL PROTECTED]> > To: "Delz" <[EMAIL PROTECTED]> > Cc: <[EMAIL PROTECTED]> > Sent: Monday, November 25, 2002 2:46 PM > Subject: Re: [Ltsp-discuss] RPC Timeout? > > > > > > > > The machine 'ws001' is trying to connect to an NIS server, but can't > > find one. You should (1) disable NIS on the client or (2) install and > > configure an NIS server :) > > > > Ivan... > > > > > > On Mon, 25 Nov 2002, Delz wrote: > > > > > Hi All, > > > > > > Anyone who has an idea why this occurs on the /var/log/messages. I'm > using > > > kdm and this usually occurs all the time on the logs. Anyone who has an > idea > > > on how to remove this error message. Hope you can help. > > > > > > Nov 25 14:47:34 ws001 ypbind[366]: broadcast: RPC: Timed out. > > > Nov 25 14:48:31 ws002 ypbind[366]: broadcast: RPC: Timed out. > > > Nov 25 14:48:48 ws001 ypbind[366]: broadcast: RPC: Timed out. > > > Nov 25 14:49:45 ws002 ypbind[366]: broadcast: RPC: Timed out. > > > Nov 25 14:50:02 ws001 ypbind[366]: broadcast: RPC: Timed out. > > > > > > Regards, > > > > > > Delz > > > > > > > > > > > > ------------------------------------------------------- > > > This sf.net email is sponsored by:ThinkGeek > > > Welcome to geek heaven. > > > http://thinkgeek.com/sf > > > _____________________________________________________________________ > > > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > > > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > > > For additional LTSP help, try #ltsp channel on irc.openprojects.net > > > > > > > -- > > > > ---------------------------------------------------------------------- > > Ivan Pulleyn > > Sixfold Technologies, LLC > > Chicago Technology Park > > 2201 West Campbell Drive > > Chicago, IL 60612 > > > > email: [EMAIL PROTECTED] > > voice: (866) 324-5460 x601 > > fax: (312) 421-0388 > > ---------------------------------------------------------------------- > > > > > > > > ------------------------------------------------------- > > This sf.net email is sponsored by:ThinkGeek > > Welcome to geek heaven. > > http://thinkgeek.com/sf > > _____________________________________________________________________ > > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > > For additional LTSP help, try #ltsp channel on irc.openprojects.net > > > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net >
------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net