Joey, Thanks for the response. I don't think that I am to the level of having a driver or hardware problem (yet! :-) since I can not even telnet into port 9100. The problem seems to be that the client is refusing connections to port 9100.
I'll keep digging. Pete -- http://www.elbnet.com ELB Internet Service, Inc. Web Design, Computer Consulting, Internet Hosting Joey Officer wrote: > > i don't have any experience working with CUPS or printing from the > workstation (its on my todo list, sorry), but could you give some additional > information, IE, what type of printer, workstation, can you verify the LPT > port is good? > > one thing that I had a problem with in the past (usually network printers) > was a driver problem. Also, are you setting up your printer as lp0 or as a > network printer attached to IP<workstation.ip> . I'm not very familiar with > this and I'm not in my test environment. good luck and send more info... > > joey > > ----- Original Message ----- > From: Peter Billson <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Monday, November 25, 2002 11:22 AM > Subject: [Ltsp-discuss] Printing > > > Hello all, > > I'm trying to set up printing to a machine hung off lp0 of one of the > clients. I set up the lts.conf to start the client's print daemon and if I > start the client in run level 3 I can confirm with ps that the daemon is > running and listening on port 9100. > > > > My problem is I can't seem to send a print job to the client. I also get > a 'connection refused' if I try to telnet into the client's port 9100 from > the server. > > > > BTW - I'm using CUPS if that matters. > > > > Thanks! > > > > Pete > > -- > > http://www.elbnet.com > > ELB Internet Service, Inc. > > Web Design, Computer Consulting, Internet Hosting > > > > > > ------------------------------------------------------- > > This sf.net email is sponsored by:ThinkGeek > > Welcome to geek heaven. > > http://thinkgeek.com/sf > > _____________________________________________________________________ > > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > > For additional LTSP help, try #ltsp channel on irc.openprojects.net ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net
