i don't have any experience working with CUPS or printing from the workstation (its on my todo list, sorry), but could you give some additional information, IE, what type of printer, workstation, can you verify the LPT port is good?
one thing that I had a problem with in the past (usually network printers) was a driver problem. Also, are you setting up your printer as lp0 or as a network printer attached to IP<workstation.ip> . I'm not very familiar with this and I'm not in my test environment. good luck and send more info... joey ----- Original Message ----- From: Peter Billson <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, November 25, 2002 11:22 AM Subject: [Ltsp-discuss] Printing > Hello all, > I'm trying to set up printing to a machine hung off lp0 of one of the clients. I set up the lts.conf to start the client's print daemon and if I start the client in run level 3 I can confirm with ps that the daemon is running and listening on port 9100. > > My problem is I can't seem to send a print job to the client. I also get a 'connection refused' if I try to telnet into the client's port 9100 from the server. > > BTW - I'm using CUPS if that matters. > > Thanks! > > Pete > -- > http://www.elbnet.com > ELB Internet Service, Inc. > Web Design, Computer Consulting, Internet Hosting > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > _____________________________________________________________________ > Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: > https://lists.sourceforge.net/lists/listinfo/ltsp-discuss > For additional LTSP help, try #ltsp channel on irc.openprojects.net ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _____________________________________________________________________ Ltsp-discuss mailing list. To un-subscribe, or change prefs, goto: https://lists.sourceforge.net/lists/listinfo/ltsp-discuss For additional LTSP help, try #ltsp channel on irc.openprojects.net