So, BCR port for video at 57600 and RS-232 at 76800 for data transfer? ----- Original Message ----- From: Stephen Adolph To: m...@bitchin100.com Sent: Sunday, April 26, 2020 11:32 AM Subject: Re: [M100] speed benchmark!
no as I have said, bit banging the BCR port is limited to 57600. so it makes sense to use 76800 and a suitable usb RS232 port On Sun, Apr 26, 2020 at 11:29 AM Mike Stein <mhs.st...@gmail.com> wrote: No problem using the RS-232 port at 76800 but can you bit bang the BCR port at that speed? That was one of the main points after all. ----- Original Message ----- From: Stephen Adolph To: m...@bitchin100.com Sent: Sunday, April 26, 2020 9:03 AM Subject: Re: [M100] speed benchmark! I'm going to take back this comment: " I myself have passed characters between two m100 at 76800 by manually coding, but It was flakey because of how you have to set up the UART." For some reason I thought I recalled that the UART stopped using 16x clock for RX sampling at 76800. Wrong! It always uses 16x clock. So the UART should not have any problem with 76800. So, when used with an RS232 system that can support 76800 that's the best option.