hey people, After putting my L20B in to my 1600 i am struggling with the wiring to get it running :( I did have it running for a short while, but now when you turn the key the starter motor cog wont pop out into the flywheel housing and spin, instead it just keeps popping in and out quickly. If you take the starter off the engine and then turn the key you can see that the cog doesn't pop out and stay out, it just keeps ticking in and out. I am fairly baffled, as it was running fine and now this! I even put a different starter on and it did the same thing! Any suggestions would be great!
Also, i have a alternator with a built in regulator and my wiring diagram shows a seperate regulator. At the moment i only have 2 wires connected to the alternator, - one from D+ on the alternator to the positive terminal on the starter, - and another from the screw in the back of the alternator to earth. i am just curious whether i should have something else connected and also that what i have connected so far is right?? Sorry for the very long post, but i am just really keen to get my car back on the road :) Thanks to anyone who can help me out with my wiring troubles, Mark. _____________________________________________________________ Get Your free Ozdat Email Account ---> http://www.ozdat.com _____________________________________________________________ Promote your group and strengthen ties to your members with [EMAIL PROTECTED] by Everyone.net http://www.everyone.net/?btn=tag --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
