The night I watched Glenn run it at the Rally in the Valley, other competitors were queued up at the Clerk of Course door after the event to protest the engine specs. And it didn't have the head spacer then! However it was over 2 liters with a huge throw crank in the L18 Block. ----- Original Message ----- From: "E Smith" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Sunday, 30 June 2002 7:55 AM Subject: RE: HOW BOUT $32000 FOR A DATTO 1600???
> Craig, > CAMS had something to say about it after a few disgruntled punters who had > also spent big bucks got their noses out of joint. > You could legally run an OS GIKEN head if you could ever find one. > Stay tuned for the Rally of Melbourne appearance I guess. > > Cheers > Feral Errol > [EMAIL PROTECTED] > http://www.datrats.com.au/ > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of Craig Overend > Sent: Sunday, 30 June 2002 3:51 AM > To: [EMAIL PROTECTED] > Subject: Re: HOW BOUT $32000 FOR A DATTO 1600??? > > Errol, > I gather this monster datto L18 is supposed to be PRC legal? How do they get > away with installing a head spacer, they way I understand it that would be > illegal, is this not the case? I see you mention that was the original > engine, > do you know what this is being replaced with? > > That would be a sick project though! Torque monster 2.4 rally engine! Just > bolt > on a 1" head spacer, sleeve the block to 89mm, line bore the main's and > clearance the block and crank to drop in a Z24 96mm crank, custom 160.3mm > rods > and custom 25mm pin height forgies. 1.67 rod/stroke ratio 0.55mach index > designed head fully efi... Ooh tempting, if head spacers are legal! > > Was there ever any L series 4 valve heads made that you could legally run on > an > engine like this? If so build yourself an FJ24 L series then! :)) Can you > imagine that in a PRC legal sub 900kg datto?! I can. You might need some > lead > ballast in the floor to bring it up to the minimum weight for a 2.4L though! > :P > > Cheers, > Craig. > > E Smith wrote: > > > Yep its Glen bakker. The car is absolutely mint with not a skerrick of > bog. > > The shell was hand beaten where needed. It has full WRC approved cage, Big > > Brembo I think brakes F & R. A self levelling lacquer paint job done by > the > > guy who does the Castrol group A's. An option 1 gear box & R200 LSD. > > The original engine was a 2.4 litre L18 with spacer between block & > > head!!!!! Carrillos and 48's. 240HP at the flywheel I believe? > > Geoff Portman is doing some testing for him and helping Les in the setup. > > Cheers > > Feral Errol > > [EMAIL PROTECTED] > > http://www.datrats.com.au/ > > > > > --membersozdat------------------------------------------------------- OZDAT Mailing List Please Note:- Send (un)subscribe requests to [EMAIL PROTECTED] Send submissions to [EMAIL PROTECTED] No unauthorised redistribution of this email http://www.ozdat.com/ozdatonline/index.htm http://www.ozdat.com/ozdatonline/listindex.html http://www.mail-archive.com/[email protected]/ ---------------------------------------------------------------------
