Hi all,
Would happen to happen to know approx value of my series one?
It's a 12:4:2 recording version in good shape, I think it has been re-
capped at some stage of it's life.
I have a friend who might want to buy it but I'm not sure what to ask.
Any help much appreciated.
Best
Pete
Sent from my iPhone
On 4 Jan 2009, at 17:31, Ike Zimbel <[email protected]> wrote:
The 1st thing I would do is check the power supply connections. On
that desk, they should be screw terminals under the patch bay
(unless this is one of the newer table-top models made by Sytek?)
and on the back of the PS-3. If those look ok, pop the lid off the
power supply (UN-PLUG IT FROM THE MAINS FIRST!) and have a look
around for burnt or discoloured parts. Pay special attention to the
areas around the left and right sides where the pass transistors
mount to the PCB and the heat-sinks. Also look at the fuse holders
that are mounted on the board there. Let us know what you find.
best,
Ike
Tomer Lahav wrote:
How do I go about pin pointing the problem? If it's a bad cap, how
do find out which?
"electrical sounding" is "bzzzz"... :)
----- Original Message -----
From: Donald Put
To: [email protected]
Sent: Sunday, January 04, 2009 6:51 PM
Subject: Re: NEOTEK: Elan m2 problem
My first guess would be a power supply issue. Maybe a filter cap
on the way out, a bad connection between the harness and the PS or
the console, or a bad solder joint on the main rail connection to
the motherboard.
What does the "electrical sounding noise" sound like?
Cheers,
--
Don
On Sun, Jan 4, 2009 at 8:46 AM, Tomer Lahav <[email protected]>
wrote:
Hey Guys,
I've got a really weird problem with an Elan m2 that I haven't been
able to resolve...
Every once in a while there's an electrical sounding noise that
lasts for a few seconds, sounds like a power surge.
All the green leds on each channel strip are weakened while this
noise occurs, and sometimes the main solo led flickers on although
nothing's in solo.
Another thing that happens is like a quick drop out that lasts just
a split second - green leds flicker off and then immediately back
on, sound is interupted.
These symptoms became more and more frequent and it has completely
disabled the studio.
Any help would be greatly appreciated,
Thanks,
Tomer
--
Ike Zimbel
Zimbel Audio Productions Ltd.
Toronto
416-720-0887
"Studio House Calls" - Repairs and upgrades to analog audio
equipment including: Amek, Allen & Heath, Neve, Neotek, MCI,
Soundcraft and more.
------ You can unsubscribe at anytime by sending an email to mailto:[email protected]
with "unsubscribe neotek" in the message body. If you have any
difficulties, or questions --please send an email to [email protected]
. The Neotek list is lovingly hosted by Catapult Web Development.
Remember that any message or reply sent to the list will be
automatically forwarded to all subscribers. Vive Le Neotek ! Thanks.
