Carl J. Bauman wrote: > John Richard Smith wrote: > > > /etc/lilo.conf, note the append= line, just add the mem=nopentium to > > it as follows, > > > > image=/boot/vmlinuz-2.4.18-6mdk > > label=82-2.4.18-6 > > root=/dev/hda7 > > initrd=/boot/initrd-2.4.18-6mdk.img > > append="devfs=mount hdd=ide-scsi hdc=ide-scsi nobiospnp > mem=nopentium" > > vga=791 > > read-only > > > > don't worry about the extras Ihave, > > John > > > I noticed that > http://www.mandrakeuser.org/docs/hardware/hbits6.html#athlon contained > the following caveat: > > "Notice that if you are using SCSI emulation, e.g. for an IDE CD burner, > the 'ide-scsi' option must come after the 'mem=nopentium' option (that > is you have to insert that option before 'ide-scsi'). Otherwise the > emulation might stop working correctly." > > I don't know if this is still true or not. Just thought I'd mention it. > > Regards, > Carl > > > > >------------------------------------------------------------------------ > >Want to buy your Pack or Services from MandrakeSoft? >Go to http://www.mandrakestore.com > Thank you Carl and all who helped me with this change to lilo. It may be too early to tell but it looks like this fix in lilo may have turned my horribly unstable system into a very stable system now. Everything so far that I tried to use is working and does not crash. My panel does not disappear on me anymore either. I hope others with similar systems learn of this fix. Thanks so much for your input. I had been struggling with this since July. Thanks very much again.
Gratefully, Marcia
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com