Deltec makes the good shunts. http://deltecco.com/
That series of shunt is pretty cheap in small quantities. Less than $30. Empro is another US shunt manufacturer: http://www.emproshunts.com/home.aspx On 12/4/2018 1:39 PM, William Miller wrote:
When you are aligning negative busses to bolt them to bottom of inverter, be very careful if you need to move the bars to align with holes. It is real easy to fracture the sub-standard shunt bases. See attached photo comparing the kind of shunt you want versus what Outback ships. I am looking for a source for the sold-base units. Anyone know for sure where to find the good ones?
-- -James Jefferson Jarvis APRS World, LLC +1-507-454-2727 www.aprsworld.com _______________________________________________ List sponsored by Redwood Alliance List Address: RE-wrenches@lists.re-wrenches.org Change listserver email address & settings: http://lists.re-wrenches.org/options.cgi/re-wrenches-re-wrenches.org List-Archive: http://www.mail-archive.com/re-wrenches@lists.re-wrenches.org/maillist.html List rules & etiquette: www.re-wrenches.org/etiquette.htm Check out or update participant bios: www.members.re-wrenches.org
