Re: [Elecraft] K3 Mics
There are many other reasons that some people will purchase more expensive components. The cheapo computer headsets may work as well but some will buy the Heil just because. Yes two wires touched together will key your rig but some like the beauty of a high end paddle such as the Begali or the N3ZN. Nice to look at just sitting on the desk. And yes, some people have more money than good sense. 73, Tony W7GO On 8/15/2012 4:49 AM, Brian Alsop wrote: David, Yes this is a very interesting phenomenon. Add external gazillion band equalizers, compressors, noise gates, $30 connectors, fancy mike mounting hardware et al to the mix. All to massage an under 3KHz bandwidth signal. However it isn't just the phone guys. Some CW guys spent many hundreds of dollars for a paddle. All it does is close two contacts. I suspect in both cases the point of diminishing returns is reached far earlier than these price levels. However, it is good for the economy. Like an OT said; If you want to feel your have a strong signal, turn up the monitor level. In other words, it's often an in the head game. 73 de Brian/K3KO On 8/15/2012 10:04, David Pratt wrote: I can never understand why people spend hundreds of pounds on Heil headsets and similar when inexpensive computer headsets give such good results. 73 de David G4DMP In a recent message, Graham Kimbell G3TCTg3...@lineone.net writes I have been using a computer style headset and mic bought from a rally for about £2. Reports have been very complimentary and it even has its own volume control. I just bought another one as a spare for £1. Can't get better value than that! - No virus found in this message. Checked by AVG - www.avg.com Version: 2012.0.2178 / Virus Database: 2437/5201 - Release Date: 08/14/12 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] heil mic adaptor
Most of the major amateur radio dealers have them. 73, Tony W7GO On 7/23/2012 7:39 AM, Scott Dunlavey wrote: hello... I am looking for the cable/adaptor that goes from the K3 to a Heil PR-20 mic; the cable is CC-1 XLR-K... anybody have one I can buy??? or any ideas or suggestions ??!! scott w2ntv future K3 owner __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] cables for digital/dayton
I bought a couple of CALRAD 30-257 right angle, 3.5mm, 4 cond. plugs. A bit larger but all metal and seem well built. 73, Tony W7GO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] W1 wattmeter kit
Does anyone have a W1 wattmeter kit they would like to part with? w7go at arrl.net 73, Tony W7GO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] New App
Hey guys, Check this out, I downloaded it to my iPhone! https://mail.google.com/mail/help/promos/tap/index.html 73, Tony W7GO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] DX Clusters
Wayne, Try W6RFU in Santa Barbara (UCSB) 128.111.56.240:7300 73, Tony W7GO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Handheld Mic Advice
I highly recommend the MH2. The only thing I'm not fond of is the stiff coil cord. But I don't think you'll be sorry. I bought mine used and am very happy with it. 73, Tony W7GO If the MH-2 is a good mic, that's what I'll go with. 73, Joel - W4JBB __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Ultra flexible Multi-Conductor Shielded cable source?
Heil wire is very good quality flexible. Here is one company that handles it: http://www.universal-radio.com/catalog/cable/2645.html There are others. 73, Tony W7GO On Sun, Feb 19, 2012 at 12:23 PM, Gary K9GS garyk...@wi.rr.com wrote: With all the talk of wiring microphone cables and such I was wondering if anyone had a source for buying small quantities of really high quality, ultra flexible, shielded cable? I was thinking 2 conductor plus a shield. This would also make a great cable for attaching to a paddle. I'm looking for something like a medical grade cable. Any ideas?? -- 73, Gary K9GS Check out K9NS on the web: http://www.k9ns.com Greater Milwaukee DX Association: http://www.gmdxa.org Society of Midwest Contesters: http://www.w9smc.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Now accepting orders for the Elecraft KX3 Transceiver
Probably almost as many as when the K3 was released. Oh yeah, I ordered mine last night. 73, Tony W7GO On 12/28/2011 8:26 AM, Mark / Tatiana Gilstrap wrote: One wonders, however, how many pointlessly stupid postings will show up on this list during the next nine months by everyone who has just ordered a KX3 (it's not KX-3). __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Pileups and the KPA500
Nope - only that you are working him with an Elecraft product and this is the Elecraft reflector. ;-) ;-) 73, Tony W7GO On 7/30/2011 3:39 PM, Fred Jensen wrote: On 7/30/2011 12:58 PM, KD3RF wrote: Worked ST0R on two bands so far, both using the KPA500, SB on 20 mtrs and 15 mtr RTTY. Ran the amp at reduced input on RTTY for 200 watts out, fan didn't even come on. Can someone tell me what I could expect from my KPA500 working the ST0R pileup that I couldn't expect from a Brand X 500W amplifier [or an unbranded 1,500W amp running at 500W]? __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] HW-101
Mike, Would that be plain or Bar-b-Que? ;-) 73, Tony W7GO On 7/25/2011 11:09 AM, vicki glover wrote: Guys, I know this probably is wrong place to be asking questions about the heathkit, but, I'm desperate! Anybody have any suggestions to correct chip in cw transmission? 73 mike-kb3qja __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Power Supply?
A beer bottle opener would be nice as well :-) 73, Tony W7GO On 7/2/2011 4:54 PM, george fritkin wrote: You know, I like a good Martini occasionally when I am one the air. Why can't a good mixer be built in the K3 enclosure. Also the guys should include an computer that can log contacts and have good voice recognition so the K3 can do contacts automatically. Then all you would have to do is turn on radio have it scan your favorite frequency and talk to your buddies. Then I could go out with my wife and enjoy and evening with her and my Martin ..EH! Love my two K3s George, W6GF - __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] (no subject)
Some folks are interested in these types of posts, as I am. IMHO it's not nonsense. 73, Tony W7GO On 6/8/2011 9:10 AM, w0...@aol.com wrote: Let's stop this Elecraft Service nonsense. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] paddle key training
You have gotten some good info already, but let me show you an example of some of my favorite types of answers here: Forget about the paddles, you need to use a straight key. 73, Tony W7GO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Power Shutdown
Same thing happened here with that power supply and K3/100. Couldn't keep the K3 from tripping starting at about 50 watts. Now using the Astron SS-30 with no problems. 73, Tony W7GO On 3/23/2011 5:40 PM, Hunsdon Cary III wrote: I've used an Astron RS-35M power supply for about 25 years, that's what I used when I got my K3-100 #3449. A few weeks ago, the K3 began to shut down in transmit. 73, H, K4TM LYNCHBURG, VA H. Cary III h3c...@gmail.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Grunge
After the initial cleaning, Endust Electronics or Multisurface is good follow up. 73, Tony W7GO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Flex 5000
Bob, Any radio can be over driven or mis-adjusted and made to sound bad, not just the Flex 5K. It's usually the operator and poor setup. 73, Tony W7GO On Wed, Dec 29, 2010 at 11:22 AM, riese-k3...@juno.com wrote: gang a friend of mine has one and Dick plays with the software loads. I noticed that his signal is distorting on certain voice frequencies and splattering badly, I have noticed this pattern on other signals dont know if they were flexing or not. Dick always has his SSB signal at least 3+Khz wide if I mention it he will narrow down,, not sure why flex has that as an option glad I dont have one Bob K3DJC Banks Forced to Forgive Credit Card Debt Find Out How Much of Your Debt Can Be Erased. http://thirdpartyoffers.juno.com/TGL3141/4d1b6071772a8fad59m03vuc __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K2 - CQWW CW Contest
Congrats Stan, good job. 73, Tony W7GO On 11/29/2010 12:36 PM, stan levandowski wrote: My barefoot K2 at 5 watts and my 62' attic doublet with the SG-237 autocoupler produced 43 countries, 25 states, and six Canadian provinces for me. I operated on 80, 40, 20, and 15. The K2 performed flawlessly. Stan Levandowski WB2LQF HF QRP CW -- Doing more with less for over 50 years! QCWA #35038 OOTC #4558 NAQCC #4740 SKCC #6488 FISTS #14992 __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] SolderingStation Selection
Paul, I have several including a top of the line Weller. My number 1 choice is the Hakko 936, just a great piece of equipment. 73, Tony W7GO On 11/6/2010 3:33 PM, pagog...@stny.rr.com wrote: I am waiting for my K2/100 to be delivered. In the meantime I am deciding on what soldering station to buy. On the Elecraft web site there is a posting to stay away from soldering irons40 watts and 850 degrees. I am looking at a Weller 50 watt and variable temp from 350 to 850 degrees. It is a model WES51. Is it ok to use this soldering station on the K2/100? Tnx, WN2K Paul __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] OMNI VII
You should probably ask this question on the Ten-Tec reflector. 73, Tony W7GO On 9/27/2010 7:07 PM, Adriano Perazio wrote: Hello all I´m new here and thinking about a O7. I run almost all the time in SSB contests and DX. Own a 756 pro 3 but feel it noisy. What you guys think about the O7 for that use ? Tnx PY2ADR / ZY2C __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] OT: fixing antennas
I still get a little rush every time I climb my 50' tower. This video gives me that same feeling. Cool video though. 73, Tony W7GO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] CNC Heavy K2/K3 knobs
Please, let's not do the knob thing again, been there, done that. Check the archives. 73, Tony W7GO On 9/10/2010 8:33 PM, Richard S. Lindzen wrote: $150 plus heavy enough to bend shafts. Wow. Dick, WO1I At 10:31 PM 9/10/2010, GEORGE CORTEZ wrote: Found these on the net and thought some of you may like this A bit on the pricey side http://www.73cnc.com/73cnc/elecraft.html George NE2I __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] advice on rig
Susan, If you're sure you want to step down, you might check out the Ten-Tec Omni VII. No complicated menus and very straight forward to operate. Good QSK. Not as nice looking as the K3. ;-) 73, Tony W7GO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Very Efficient Ear Buds
Yep, The price is also very reasonable, just ordered mine ;-) Kevin Rock wrote: I just heard about some ear buds which are quite efficient. They use multiple drivers for each frequency ranges. Here is a link to a description of them: http://news.cnet.com/8301-13645_3-20005384-47.html More here: http://www.jhaudio.com/store/ I think it would be fun to test them in the field. 73, Kevin. KD5ONS __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Reduced-height bail
Yeah, Don't start asking questions related to ELECRAFT so often. This list was starting to run just the way* I* want it to now [?] 73, Tony W7GO On Mon, Jul 5, 2010 at 3:57 PM, N1JM johnn...@gmail.com wrote: You guys must be too used to Yaesu radios , that I think are too low -- View this message in context: http://elecraft.365791.n2.nabble.com/Reduced-height-bail-tp5255430p5257993.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] The list is now useless!
And the Kenwood thread was terminated yesterday Cmon guys. 73, Tony W7GO On Sat, Jul 3, 2010 at 10:15 AM, Larry - K2GN k...@comcast.net wrote: Thanks to all of you with diarrhea of the keyboard you have made the Elecraft reflector useless. PLEASE STOP THE BS. I do want to read about Elecraft but not at the expense of wearing the paint off my delete key. It's just not the current BS on the ad in the UK, who cares. It happens to too many threads. My filter list is getting huge!! de K2GN - Larry - http://k2gn.com K3 S/N - 3278P3 S/N - (Ordered) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] My first post
Hi Davy, 73 means good bye, see you later, adios, etc. Are you planning to get your ham ticket? 73, Tony W7GO On Thu, Jun 24, 2010 at 11:20 AM, Casual Observer casualobserver...@msn.com wrote: Good Morning All. I am a new builder, and so far, an un-licensed Elecrafter. I ordered my K2 last week with the following options: KSB2, KDSP2, KBT2, KAT100-2, and an EC2. I have built numerous Heathkits in the past, but have no formal electronics training. I am also a retired Navy CPO (ADC) and P-3 Orion Instructor Flight Engineer. I flew the P-3 for 17 years and logged over 8,000 flight hours tracking Soviet Subs during the cold war. I am able to learn a great deal from your site and enjoy the discussions. Come to think of it, I may have lifted 1 or 2 cold ones with some former P-3 Radio Operators. We actually had a “key” in our aircraft, I thought it was a beer can opener J. Finally here are my thoughts…. I’d like to install the KPA100 (someday) in the top of the KAT100-2. This would require a cable/connection between the KAT100/KPA100 and the K2. My plan is to keep the KBT2 battery installed in the top of the K2. Possibly 1 or 2 quick disconnects to make the transition to battery operated portable again. (Now please keep in mind I know absolutely zip/nothing/NADA about the K2 or radios, but I am an Engineerd). Do the folks who use their K2’s in the field require an internal tuner? Could I eventually incorporate an internal tuner for travel, and keep the external tuner for home use? What are your thoughts. My last question please. What’s “73” and I thought “Q” was aerodynamic pressure as in MaxQ ? Respectfully Navy Davycasualobserver...@msn.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 with Heil HC-5
Well, maybe. But there are people that don't have the time/skill but have the money and are willing to pay the price ;) 73, Tony W7GO Brian Alsop wrote: Egads, $35 + shipping for a 6 cable that can be made for a few bux. What a rip off. 73 de Brian/K3KO Turns out that the standard Kenwood cable CC-1XLR-K, with the red connector is perfect for the K3 (HRO price $35.95). __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Mic questions
And the HC-5 sounds very nice with the K3. 73, Tony W7GO Don Wilhelm wrote: Phil, You would have to rewire the HM-36 for use with the K3 - the K3 uses a fixed microphone jack pinout (unlike the K2 which can be configured or many microphones). The Heil B10 microphone can be used if you change the Heil adapter to a Kenwood type 9or create your own adapter. The tone of your question tells me that you are capable of building your own adapter. Download the Elecraft K3 manual to see the microphone jack pinout. 73, Don W3FPR Phillip Zminda wrote: I recently sold my Ten-Tec Omni VI and about to buy a K3. I have a Heil B10 boom headset wired with the Ten-Tec 4-pin connector. I believe it has the HC-5 element. I'm not a heavy phone operator but use the headset for contests. I also have a K2 with an ICOM HM-36 mic. Is the BM-10 worth keeping for the K3? Do I only need to re-wire the 4- pin connector to the correct pin-outs for a K3 or am I better off parting with the BM-10 for a more compatible mic? How is the HM-36 as a mic for the K3? Any comments appreciated. Thanks, Phil N3ZP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] Elecraft] Wow! Nice Knobs :-)
$105.00 Let the whining begin : ) 73, Tony W7GO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Seems to be confusion!
If you like that price, check out the 6k Ultrabeam 6-40! 73, Tony W7GO Fred Jensen wrote: Phil LaMarche wrote: Hello Phil, I will have some black K3 knobs shipping on Monday. Price is $105.00 each plus $5 USPS Priority Mail shipping. How do I buy stock in the company that sells knobs for $105? 73, Fred K6DGW - Northern California Contest Club - CU in the 2010 Cal QSO Party 2-3 Oct 2010 - www.cqp.org __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Wow! Nice Knobs :-)
I agree Bill. Got one for my K2 and am very happy with it. Very high quality and tunes very nicely. The little straight key is a treat to use also. 73, Tony W7GO Bill Miner wrote: Check out this website if you are interested in some nice wighted CNC machined knobs for Elecraft K2 and K3s. They are a bit pricey but very high quality. www.73cnc.com Standard disclaimer: I have nothing to do with this company I'm just a satisfied customer. 73, Bill - K6WLM __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 option request
Yep, that's the way it's done here too. 73, Tony W7GO lstavenhagen wrote: hmm.. I still think it's easier to - A B and hit Split - turn VFO B contents + 2 (or the desired offset) but to each his own Ok, I'll pour no more gas on this one, I'm QRT... 73, LS W5QD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] vaporware...titillation...
This generates more interest and more buyers which is the name of the game. 73, Tony W7go On Tue, Mar 30, 2010 at 11:50 AM, John Ragle tpcj1...@crocker.com wrote: I tend to agree with Richard Thorpe's impatience with the insiders' commentary on the P3. Arch-rival Flex Radio has been doing this sort of thing for months WRT pSDR, and the latest aspect regards their Flex 1500 which has been promised for a year or so and which has now been released to a number of insiders, who brag about it on the Flex reflector, even though the delivery date continues to slide. The worst offender in this respect has been Apple, but at least they will have a more or less fixed date for their newest products. One cannot even get price/release information on the P3 from Elecraft (I've tried), even though pre-release pictures and insider commentaries abound. John Ragle -- W1ZI __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] The no-serial port conundrum
David, I have a Toshiba Satellite Laptop. I use a Prolific based USB/serial converter and it works no problen with the K3. Use it for logging/radio control and firmware downloads. 73 Tony W7GO David Dunn wrote: USB/Serial converters may work with most computers most of the time, but I have 4 different models of adapters (one of which cost just £2)all of which work with two different desktop computers but as yet I have *not *found one that will work with my newest computer a Toshiba Satellite Laptop. Wonder if anyone else has had similar problems? David VK3DBD/G3SCD __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] [OT] FT-5000 vs. K3
Got one. The FT5K is back in the box and the K3 is on the desk. 73, Tony W7GO Arie Kleingeld PA3A wrote: OK, Let's sell the K3 and buy the FT5k. It's perfectly clear. 73 Arie PA3A __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Elecraft Amps
The Acom 2000A is a fine amp and works great with my K3. The amp is a beast to move though and I would consider selling it and getting an Elecraft amp when and if they become available. 73 Tony W7GO Doug Turnbull wrote: I wonder what true compatibility is. An amplifier either works well with the K3 or it does not. I know that both Acom 1000 and Acom 2000A work perfectly with the K3. Interfacing an amplifier is not such a big deal with the K3. Of course some of our fellows have questions from time to time but I believe that most people get their amplifier to work just fine with the K3. I should love to see Elecraft with successful amplifiers which were making good money for them. I would be very sorry to see them bring out such a major product which did not return its investment. Maybe Elecraft will show us all again that they can beat all the competition but amplifiers are a bit more basic. An old Heathkit SB200/220 can still do wonders to raise the output a few dB. 73 Doug EI2CN -Original Message- From: elecraft-boun...@mailman.qth.net [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of lawrence libsch Sent: 11 February 2010 15:49 To: elecraft@mailman.qth.net Subject: [Elecraft] Elecraft Amps Group - For those who believe Elecraft can't compete in the amp market, I ask you to consider the market into which Elecraft introduced the K3. Now almost 4000 of us have sold or retired other high quality transceivers for the K3. It's excellent that many K3 owners already have quality amps that function well for them. Many of us, however would like to purchase an amp from Elecraft with true K3 compatribility and the kind of quality and service advantages that Elecraft has brought to the K3. K4KGG, Larry __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Spring cleaning
Pledge Multi Surface is what I use and works very well. Tony W7GO AD6XY wrote: Happy New Year Everyone! I am looking at my K3 in the sunshine and I have noticed some fingerprints on the front panel. Some or the ore often used buttons have dirt on them too. I wonder what people are using to clean the front panel? Soapy water will do I expect - anything better? I don't wish to damage the paintwork or leave water marks. Mike __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Not necessarily an Elecraft subject!
Another possibility: http://extendadot.com/ 73, Tony W7GO James Harris wrote: Good evening, All. I recently acquired a Vibroplex Original with the idea of learning to use it attached to my K3/100 [S/N 2802]. I need to slow it down until I can get the gist of it. I can now work at 18-22 wpm with my Iambic. But I wouldn't dare try to get on the air even at the bugs slowest speed adjustment which is in the range of 30 wpm. I would like to buy, lease or borrow a Varispeed {for a round shaft] until I can get up to speed with my new toy. They are no longer available from Vibroplex. I'd like to hear from anyone having such a device. Thanks Best 73. Jim. WA4NTM PS - I truly appreciate being able to use my K3 as a practice keyer. You know, in the TEST mode. Thanks all the guys gals @ Elecraft and the design team. What a fantastic machine which never ceases to amaze. __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] P3 high-quality photos to be posted tonight ( from Elecraft)
Glad to see that P3 sitting to the right of the K3... whew that first shot was worrisome ;-) 73, Tony W7GO __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3: machined concentric knobs from Mouser
Wayne, They would have to be_ alot_ nicer looking than the stock K3 knobs. I really like the stock knobs anyway. 73, Tony W7GO would you pay $200 for those knobs if we designed them for you? Just asking) 73, Wayne N6KR __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
[Elecraft] [Fwd: Fwd: Fwd: Stupidity awards]
Original Message Subject:Fwd: Fwd: Stupidity awards Date: Thu, 19 Mar 2009 13:30:46 -0400 From: countreebump...@cox.net Subject: Fwd: Stupidity awards Date: Wed, 18 Mar 2009 12:44:56 -0400 To: undisclosed-recipients:; ?The glorious Winners?for 2008?are?: NOTE - not snope verified for those so inclined to be concerned. 1. When his 38-caliber revolver failed to fire at his intended?ictim during a hold-up in Long Beach , California , would-be?robber James Elliot did something that can only inspire wonder.? He peered down the barrel and tried the trigger again. This time it?worked. 2. The chef at a hotel in Switzerland lost a finger in a meat-cutting machine and submitted a claim to his insurance company.?The company expecting negligence sent out one of its men to have?a look for himself. He tried the machine and he also lost a?finger. The chef's claim was approved. 3. A man who shoveled snow for an hour to clear a space for his car during a blizzard in Chicago returned with his vehicle to find a woman had taken the space. Understandably, he shot her. 4. After stopping for drinks at an illegal bar, a Zimbabwean bus driver found that the 20 mental patients he was supposed to be transporting from Harare to Bulawayo had escaped. Not wanting to admit his incompetence, the driver went to a nearby bus stop and offered everyone waiting there a free ride. He then delivered the passengers to the mental hospital, telling the staff that the patients were very excitable and prone to bizarre fantasies.??The deception wasn't discovered for 3 days. 5. A Texas teenager was in the hospital recovering from seriou s head wounds received from an oncoming train. When asked how he received the injuries, the lad told police that he was simply trying to see how close he could get his head to a moving train before he was hit. 6. A man walked into a Louisiana Circle-K, put a $20 bill on the counter, and asked for change.? When the clerk opened the cash drawer, the man pulled a gun and asked for all the cash in the register, which the clerk promptly provided. The man took the cash from the clerk and fled, leaving the $20 bill on the counter. The total amount of cash he got from the drawer was $15. 7. Seems an Arkansas guy wanted some beer pretty badly. He decided that he'd just throw a cinderblock through a liquor store window, grab some booze, and run. So he lifted the cinderblock and heaved it over his head at the window. The c inderblock bounced back and hit the would-be thief on the head, knocking him unconscious . The liquor store window was made of Plexiglas. The whole event was caught on videotape. 8. As a female shopper exited a New York convenience store, a man grabbed her purse and ran.? The clerk called 911 immediately,?and the woman was able to give them a detailed description of the snatcher. Within minutes, the police apprehended the snatcher. They put him in the car and drove back to the store. The thief was then taken out of the car and told to stand there for a positive ID. To which he replied, 'Yes, officer, that's her. That's the lady I stole?the purse from.' 9. The Ann Arbor Michigan News crime column reported that a man walked into a Burger King in Ypsilanti , Michigan , at 5 a.m., flashed a gun, and demanded cash. The cle rk turned him down because he said he couldn't open the cash register without a food order. When the man ordered onion rings, the clerk said they weren't available for breakfast.??The man, frustrated, walked away. **THE 5-STAR STUPIDITY AWARD WINNER* 10. When a man attempted to siphon gasoline from a motor home parked on a Seattle street, he got much more than he bargained for. Police arrived at the scene to find a very sick man curled up next to a motor home near spilled sewage. A police spokesman said that the man admitted to trying to steal gasoline and plugged his siphon hose into the motor home's sewage tank by mistake. The owner of the vehicl e declined to press charges, saying that it was the best laugh he'd had in a very long time. In the interest of bettering human kind please share these with your friends and family. A Good Credit Score is 700 or Above. See yours in just 2 easy steps! __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 VFO B Knob
The diameter of the FT-817 knob is about 13/16. The mounting hole is slightly smaller than the K3 vfo b knob but could probably be carefully drilled out and made to fit. 73, Tony, W7GO Erik N Basilier wrote: Neal, I am also interested. Is the K2 knob covered by rubber, like the main K3 knob? 73, Erik K7TV - Original Message - From: Neal wir...@prodigy.net To: elecraft@mailman.qth.net Sent: Wednesday, March 04, 2009 1:35 PM Subject: Re: [Elecraft] K3 VFO B Knob Dave, I no longer have an 817, but I can tell you that the knob was definitely smaller than the K3 VFO B knob. In fact, I increased the size of it by installing a rubber crutch tip. :-) You might consider a K2 knob. It will hang a little low, but other than that it should clear everything else. The K2 knob is 1.5 in diameter. I put one on my K1. 73, Neal WA6OCP __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3: Qick Split
Right on the mark Tom! 73, Tony W7GO Tom, N5GE wrote: On Mon, 16 Feb 2009 17:49:10 -, you wrote: Doesn't Quick Split assume the DX is -always- located a fixed number of kHz away from his TX'ing frequency? This is simply not the case, if this is what's is being lobbied for. If the DX is actually an exact 5 kHz up, there will still be a need to change of one's TX frequency involved on almost every transmission ... or should be ... if one is an astute DX'er. Do people actually simply go up five and blindly call? Really? K5D is an example ... they are spending hours listening DOWN. I've worked them this way on four bands so far. I did this when operating from there ... and other DX locations ... BTW. My most-used control in working SPLIT is the A/B button. A quick poke of A/B and a tune of the A VFO to put it on the last worked station in the pileup and another poke of the A/B button to put the that frequency in the B VFO. How could this be simpler? I'm an old poop. Maybe I'm missing something 73! Ken Kopp - K0PP elecraftcov...@rfwave.net The Kenwood TS-950 series rigs have this. When I first read the manual it sounded great, but in use it was not very benificial, for the very reason you described. Besides if you are an old poop like me and Ken who has learned to determine the RX tuning routine of the DX station before you call, you will be moving the Sub RX up and down continuously as you chase **HIS RX FREQ** up and down in frequency. Old Ham Geezers learn to do this after a few years of practice or reading the Complete DX'r by W9KNI, but I hope the rest of you don't use the procedure, so Ken and I can get 'em and scoot away quickly ;o) 73, Tom, N5GE http://www.n5ge.com http://www.swotrc.net __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3: Relay noise?
No noise here at all, even putting my ear to the radio :-) 73, Tony W7GO wayne burdick wrote: It may be the delta in supply voltage on keydown slightly stimulating one or more relay coils. The DC shift could move the contacts a tiny bit. Or it might be an extremely small timing window, associated with T/R switching, that puts a little glitch on a relay control line. Either way it's nowhere near enough to change the state of a relay. Nothing to worry about; in fact it might be therapeutic. But I'll listen for it myself. 73, Wayne N6KR My K3 makes a very quiet relay-like keying noise --- http://www.elecraft.com __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Need Help with XG1
If you havn't checked it out already, check out the BNC connector. Mine had a problem internally and will cause problems. 73, Tony W7GO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3: ducking this topic
The K3 is an SDR. Let's make the most of it! 73, Tony W7GO Lee Buller wrote: Why do something so simple as use your fingers? Lets have the software do it for us. Geesh! Lee - k0wa So in addition to Wayne's suggestion (which I agree with and was actually my first reaction), how about just turning down the RF gain for that QSO to the point where the noise (almost?) is out of the picture but the guy you want to hear, should he break you, is still audible? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Condx
Worked TS7C yesterday on 20 with the K3. 559 here in NV. 73, Tony W7GO Doug Faunt N6TQS +1-510-655-8604 wrote: Hm, I was just about to ask the same thing- I can't even hear the W1AW RTTY bulletin. I did have a bad coax connector yesterday. 73, doug From: Gary Smith g...@doctorgary.net Date: Tue, 13 Jan 2009 18:07:55 -0500 Content-description: Mail message body Are the bands really this bad or is there something wrong with my K2? John AB8O I've tried three different radios in the last week to compare this K3 with. The bands $| right now. Bad... Gary KA1J ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Elecraft Covers
If you are considering a cover for your Elecraft rig, please consider the covers that Rose Kopp makes. I ordered one for my K3 and Hex key and they are great products. Fit is perfect and communication and speed of delivery is outstanding. You won't be disappointed. Contact her at: [EMAIL PROTECTED] 73, Tony W7GO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [K3] [Elecraft] K3 power tripping out
Yep, same here. I agree, I think it's the power cable. 73, Tony W7GO Craig KA0CT wrote: I have had this happen to me, mkae sure the power connector plugged in fully. The type that is used by Elecraft tends to not stay plugged in completely, as the wire is pretty stiff it tends to pull out sometimes. Craig K6ML G4AFU Paul wrote: For some unknown reason my K3 (897) tripped out 3 times last night when on 160m cw. I was running 90w out with a 1 to 1 swr - auto ATU installed. Each time I brought it back to life by hitting the POWER button. It is a little disconcerting when in mid QSO! Has anyone else had this happen to them? 73 de Paul G4AFU ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: Fw: [Elecraft] K3 and CQWW
. I hope to be able to purchase a K3 someday if Elecraft doesn't go belly up first. 73, Steve Brandt N7VS Portland, Oregon Steve, I wouldn't wait that long, you may be too old to enjoy it. :-) 73, Tony W7GO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 and DXBase
Bill, I use DXBase with my K3 successfully. Here is my config: Com 1 Baudrate 38400 Parity none Wordlength 8 Stop bits 2 73, Tony W7GO Bill Parry wrote: Howdy Guys, I am having some difficulty getting DXBase to talk to my brand new K3. I have been assured that if you select the K2 as the radio selection, this will work. The radio talks to my computer because I can do the updates. All of the parameters match for the radio, the com (6) and DXBase. I have made a couple of calls to tech support for Elecraft and they haven't gotten back to me. My radio has the newest updates (even newer than the ones that are available on the site.) Anyone have this kind of problem getting DXBase to talk to the computer/K3? Bill W5VX ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Re: K3 and DXBase
Should have added RTS high DTR high 73, Tony W7GO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] K3 kit #1244 ERR TXG
Trying to do the transmitter gain alignment (5 watt) Getting the ERR TXG on all bands. KPA3 not installed. Stock 2.7 filter installed only. All modes set to use this filter on xmit using K3 utility. Have run synth alignment ref osc alignment several times. All tmp cables are in correct locations with good connections. Latest firmware 2.46 installed. Looked through archives but no help so far. Any ideas appreciated. 73, Tony W7GO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Re: K3 kit nylon standoff
Found the answer in the archives. Thanks. Tony Morgan wrote: K3 kit builders, Was the nylon standoff that mounts near J51 on the main DSP board included with all K3 kits? My #1244 came without one. Thanks, Tony W7GO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] u want nice audio?
I have a Sounds Sweet, it's bigger and uglier. :) 73 Tony W7GO Ian Maude wrote: Bert Craig wrote: How about Palstar's offering? http://www.palstar.com/sp30.php God that's ugly :) 73 Ian ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] k3 #1244
Ordered kit: 2-22 Katiegram: 7-8 Delivered: 7-14 :-) 73, Tony W7GO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: re[Elecraft] .: Switching Supplies
I find the fan noise on my MFJ-4125 unacceptable. If I ever use it again it will have to be put behind the desk. 73, Tony W7GO ab2tc wrote: Hello all, I am using the MFJ-4125 25A switcher with my K3. I have no RF hash or birdies from the power supply at all. I find it unbelievable that popular and supposedly quality power supplies like the Astron would leave exposed transistor cases at elevated voltage above ground. The MFJ fan, which is always running, isn't whisper quiet, but not really noisy either. This switcher faired very well in the ARRL review a few years back, in fact it was one of the most quiet ones tested. Knut - AB2TC Mike Scott-7 wrote: I also have an Astron RS35 and RS50 linear supplies. Sometimes the magnetic hum from them drives me crazy. The little cork pads Astron puts in them to alleviate this does not help much. I keep them under the closed console on the floor. Mike WA8EBM - Original Message - I have my RS 35M on the floor also. I shorted it out once momentarily an exciting moment. The problem is that the transistor cases that you see sticking out of the back on the heat shield are at V+ level. If something like a ground braid (this was my case) touches the transistors or the 12V output terminal you have a short. I ended up finding a cardboard box and cut the top and front off and most of the sides off. What is left is a cardboard back shield with lots of ventilation to prevent accidental connections to the wire maze I have down there on the floor. Mike Scott - AE6WA Tarzana, CA (DM04 / near LA) K3-100 #508/ KX1 #1311 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] No field day this year for W0CZ
OK, I didn't get mine yet. Tony W7GO n4lq wrote: This is almost as bad as those stupid Katigram things. Steve Ellington [EMAIL PROTECTED] - Original Message - From: Mike Harris [EMAIL PROTECTED] To: Elecraft@mailman.qth.net Sent: Monday, June 23, 2008 2:40 PM Subject: Re: [Elecraft] No field day this year for W0CZ G'day, And why do the 1000+ worldwide subscribers to this reflector need to be belaboured by this love-in stuff which has nothing whatsoever to do with Elecraft products or their use? Regards, Mike VP8NO - Original Message - From: Bruce Bowman, NM5B [EMAIL PROTECTED] To: elecraft@mailman.qth.net Sent: Monday, June 23, 2008 2:15 PM Subject: Re: [Elecraft] No field day this year for W0CZ | re: Salvation Army... similar experience. I'll add my note of thanks! | | Bruce, NM5B ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com No virus found in this incoming message. Checked by AVG. Version: 8.0.100 / Virus Database: 270.4.1/1514 - Release Date: 6/23/2008 7:17 AM ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 SN#000995 delivered today
I wonder who got # 666? :) 73, Tony W7GO Richard S. Lindzen wrote: I had never thought about the quality of a serial number, but I suppose having serial number 911 should give me pause. Dick, KA1SA At 05:07 PM 6/3/2008, Bob W9RFS wrote: I ordered my K3/100 kit on Dec. 24TH, 2007. I received the FM, AM and 2.8 filters. Backordered items: DVR, 2ND RX, 400Hz 8 pole. 995 is a real cool number and I'm a happy guy! Bob W9RFS -- View this message in context: http://www.nabble.com/K3-SN-000995-delivered-today-tp17633730p17633730.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Assembly mat
If you use a bright lamp over the table as I do, the glare from the foil would not be good. As has been said before, if you are going to spent the money on a nice Elecraft kit, spend a few extra bucks and get a anti static mat. Just my opinion. 73, Tony W7GO 73, Tony W7GO S Sacco wrote: If you're going to do this, why not save more $$$, and just grab some aluminum foil, and spread it out on the table? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] APP crimp tool
I have read where the first two or three crimps made by a new user using a high-quality tool may be throw aways. Why is this and what does the user learn after the initial attempts? If the instructions are closely followed, can't the first crimp be as good as any? 73, Tony W7GO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] way off topic...sorry
K2 or K3? Tony W7GO Mike S wrote: At 09:06 PM 3/22/2008, DOUGLAS ZWIEBEL wrote... Loose is the opposite of tight. Lose is when you don't win Is an Elecraft gray, or grey? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 in different colors?
I hope SOLARDX can get his hands on one. Should make an interesting Eham review! 73, Tony W7GO S Sacco wrote: Another thought on this... Maybe those who want to chose the color of their radio should consider the Hilberling PT-8000. I see they are estimated to be $14,000 for the 100 watt version, or $16,000 for the 600 watt version. For those prices, I presume that you can have it in your choice of color. It looks like the 600 watt version is a better deal - only $2K more for the 400 additional watts. ;-) http://arraysolutions.com/Products/hilberling.htm#top%20of%20page I hope Rob can get his hands on one shortly after they're released. I'll probably be keeping my K3, however. 73, Steve NN4X ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Someone suggested camo ...
Desert or jungle? :) 73 Tony W7GO Ken Kopp wrote: Believe it or not, camo has been suggested as a color option we should offer in our line of Elecraft covers ... 73! Rose Kopp - N7HKW [EMAIL PROTECTED] or [EMAIL PROTECTED] ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K2-Rework Elimination?
Hi Curt, This topic has been discussed quite extensively on the reflector. Try a search here and I'm sure you'll find some answers. http://www.mail-archive.com/elecraft@mailman.qth.net/maillist.html 73, Tony W7GO Curt wrote: I've ordered a K-2 and contemplate adding the KSB2 and the KAT2 someday. Most likely will not implement any other options, mostly operate QRP CW. I'd appreciate comments about whether the re-work eliminator kits would be appropriate, or just an unnecessary expense. 72, Curt KB5JO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Have Cash....Will Buy...K3
But there are others, like me, who would like to know the outcome. :) 73, Tony W7GO Leo Bricker K5LDB wrote: Thom LaCosta wrote: On Fri, 11 Jan 2008, David J Windisch wrote: What will it take? 73 Dave N3HE Hi Dave! Well, I really don't want to sell it...so the offer has to be so compelling that I couldn't refuse it. One would have to consider the initial deposit, then the time cost of money, and then the fudge factor to make me sell it. Kinda like ebay.one is always amazed at what people are willing to pay. Since this appears to be nothing more than cat and mouse bantering with no seriousness at all how about playing offline? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] test
test ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] OT - 10 meter contest
39 contacts - 16 multipliers - all sp - all stateside - K2/KPA100 - Tri-band yagi 73, Tony W7GO Craig D. Smith wrote: Anybody else having a go at the 10 meter contest? Conditions pretty bleak here in Colorado - much worse than last year. So far I have 21 Texas QSOs, 21 local Colorado, 16 other assorted stateside and only one DX (Jamaica). Only 11 multipliers. Anyone having better luck? Or a similar tale of woe? 73 ... Craig AC0DS ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Covers
Try looking up K7NUU on QRZ and send him an email. He's the dustcover guy. 73, Tony W7GO David Ferrington, M0XDF wrote: I know someone in the US makes custom covers for radios, I even mailed about a K3 one I thought the site was http://radiocovers.com/ But looking at the site, I'm not so sure - anyone able to help? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Small power supply for a K1
Also you might check out the CUP36 at this link: http://www.mtechnologies.com/cup/ 73, Tony W7GO Norm Klieman wrote: Hi -I just bought a used K1 and am looking for a small power supply or wall wart that I can use with it, especially if I travel. Does anyone have an suggestions? Or, if you have something for sale, please contact me at [EMAIL PROTECTED] 73's - Norm K9NK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3: power supply for K3/100? solid suggestions?
I also use the Astron SS-30 with good success. I agree that the compression screw arrangement is not the greatest. Here is a neat mod that I did on mine. It takes a little work but hey, we're Elecraft guys http://www.yars.org/kc6uds/AstronSS30PowerPole.html 73, Tony W7GO Lee Buller wrote: I have had great success with the Astron Switching PS...the SS-30 handles my K2/100 and KAT100 with no trouble. Lightweight too. I do not like the connector on the back. It is a compression screw arrangement and not binding posts. So, to get a good connection, you have to have a good flat screw driver with a large handle to get enough torque to get a good connection. But, it is very light and works like a champ. We tried to kill the station on FD and could not do it. We had over 1100 Qs on FD running the station with the SS-30. Lee - K0WA In our day and age it seems that Common Sense is in short supply. If you don't have any Common Sense - get some Common Sense and use it. If you can't find any Common Sense, ask for help from somebody who has some Common Sense. Is Common Sense divine? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Elecraft / HexKey discovery
Same here. I have Elecraft Hexkey #004 and has stayed put with no bad behavior since day one. I use a gentle touch though so maybe that has something to do with it. 73, Tony W7GO - Original Message - From: Larry Makoski [EMAIL PROTECTED] To: Ken Kopp [EMAIL PROTECTED] Cc: elecraft@mailman.qth.net Sent: Wednesday, September 19, 2007 5:06 PM Subject: Re: [Elecraft] Elecraft / HexKey discovery I have Elecraft HexKey #016 and have had NO problem. It has stayed put where I placed it since Day 1. It's a joy to use and is by far the finest set of paddles I have ever had the pleasure to own and use. -- 73 de Larry W2LJ QRP - When you care to send the very least! http://www.w2lj.qrpradio.com http://w2lj.blogspot.com/ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Time to Move On
Maybe it should hav been put move away. 73 Tony W7GO - Original Message - From: Ken Kopp [EMAIL PROTECTED] To: elecraft@mailman.qth.net Sent: Wednesday, September 12, 2007 9:56 PM Subject: [Elecraft] Time to Move On Not quite sure what you're trying to say ... Move on ... to what? I don't know of a kit that's anywhere close to being an alternative to the K3 ... or the K2, for that matter. 73! Ken Kopp - K0PP [EMAIL PROTECTED] or [EMAIL PROTECTED] ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] vibroplex bug
These are kind of neat: http://www.extendadot.com/ Tony W7GO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Hakko 936
The famous Hakko 936 ESD at a good price. http://www.hmcelectronics.com/cgi-bin/scripts/query.cgi?query=936esd Tony W7GO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Brain vs Hardware filters
Cathy, Stick with it and you'll be a real expert in no time yourself. 73, Tony W7GO - Original Message - From: Cathy James [EMAIL PROTECTED] To: elecraft@mailman.qth.net Sent: Wednesday, May 02, 2007 8:47 PM Subject: Re: [Elecraft] Brain vs Hardware filters For relative newbies to CW such as myself, narrow filters are a necessity. It's all that I can handle to copy code at 18-20 WPM without the distraction of 2 or 3 other signals in the passband banging away at my brain. I have noticed that the real experts in my club often leave the filters wide open and ignore the ones they aren't working, whereas I have to narrow it down to at least 700 Hz to get clear copy, 400 Hz is my default, and it drives me nuts when I go down to 200 Hz and can *still* hear a second signal in the passband! Cathy N5WVR The example you give a wide open filter is a good idea, once you learn how to process that info mentally. But... In search and pounce, I prefer relatively narrow filtering. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Announcing the Elecraft K3 Transceiver: 10/100W, 160-6m, Assembled or Kit
WOW! I knew this was a good night to stay up late. Wayne, it looks beautiful. Looks like I'll have to have one! 73, Tony W7GO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] New Begali Paddle out soonly, was Suggestions for a paddle?
I ordered one. It was shipped out a couple of days ago. I'll let everyone know when it gets here! 73, Tony W7GO - Original Message - From: Tom Hammond [EMAIL PROTECTED] To: Jay Schwisow [EMAIL PROTECTED]; tom martin [EMAIL PROTECTED] Cc: elecraft@mailman.qth.net Sent: Sunday, December 17, 2006 12:32 PM Subject: [Elecraft] New Begali Paddle out soonly,was Suggestions for a paddle? Fellas: Begali has a new (all stainless steel) Sculpture paddle coming out sometime soon. Not cheap (ca. $550), but BEAUTIFUL! Has carbon fiber finger paddles. 73, Tom N0SS At 12:51 PM 12/17/2006, Jay Schwisow wrote: Tom, Now this will make a good thread - enough arguing about no-code vs. code. I highly recommend a Begali paddle as seen as www.i2rtf.com. This is assuming cost is not an option. I have used a Bencher, Vibroplex and Schurr. IMHO, I do not believe there is a better paddle made. I also believe that very few will disagree with me. I have met Piero and he has an incredible passion for designing the best paddles in the world. It shows. All of the paddles are great - I currently own a Signature Edition and a Magnetic Traveler. Jay - KT5E tom martin wrote: 1.. Happy Holidays to all.. Been thinking about purchasing a new paddle. think I might need to spend the big bucks for a Schurr Profi? Would like to think I don't have to do that. All my ham career I have been using a Bencher paddle and have been satisified. Really like the looks of the Elecraft-Bencher paddle? Any suggestions on what to get?? Thanks. Tom km4cu ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] wherefore art thou, K3?
Exactly Keith, You need that $1100 to put towards the new Elecraft amp! 73 Tony W7GO - Original Message - From: Darwin, Keith [EMAIL PROTECTED] To: elecraft@mailman.qth.net Sent: Monday, August 28, 2006 12:54 PM Subject: RE: [Elecraft] wherefore art thou, K3? Bob, that's a GREAT idea. As I think about it, I realize ... I DON'T WANT A K3. There, I said it. I don't want a K3, I just want an larger and more spread out UI for the K2. I want a new front panel, bigger case, bigger knobs. BUT that ruins the K2 for portable use, now doesn't it. So, your approach of a K2 docking station may be the better answer. Plug in to the thingy and you have a larger UI. Unplug and your rig is still portable. No PC to lug around. Now combine the large UI panel with the 100 watt PA in a single case and it gets cooler yet! How much? I guess I'm willing to spend $250 or so on a new front panel thingy. I'm not willing to spend $1100 on a new rig. - Keith KD1E - - K2 5411 - ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K2 price increase
FWIW, the Elecraft ad in the Sept '06 QST has the K2 listed at the old price. 73, Tony W7GO ___ The current price has been the current price for quite a while; I don't think this happened just this week. Craig NZ0R ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Palm Paddle Cube and Ultimatic mode
Rob, I have recently built a Jackson PK-4 keyer kit and it does indeed support the Ultimatic mode. 73, Tony W7GO - Original Message - From: Robert Cochrane [EMAIL PROTECTED] To: elecraft@mailman.qth.net Sent: Saturday, July 15, 2006 4:30 AM Subject: [Elecraft] Palm Paddle Cube and Ultimatic mode I am interested in the possibility of using the Palm mini - paddle and cube in Ultimatic mode as a portable key for my K2. The UK distributor (W S) has been very helpful but cannot find out from the specs whether Ultimatic is supported by the cube, but confirms that the Cubes in stock now now use a Jackson PK-4 chip in place of the PK-3. I have as yet had no reply from Palm in Germany - this may be because few people in Europe have heard of Ultimatic. Can anyone confirm that the mini - paddle plus cube now supports Ultimatic, and if so, how it feels in practice in this mode? Rob M0RAC K2 3314 Robert A Cochrane 7 Lawn Terrace Blackheath London SE3 9LJ UK Tel (44) 020 8297 1978 Mob (44) 07764 197 701 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Blackwidow
Nice looking key John, looks like you did a nice job on it. 73 Tony W7GO - Original Message - From: John [EMAIL PROTECTED] To: elecraft@mailman.qth.net Sent: Monday, July 10, 2006 12:59 PM Subject: [Elecraft] Blackwidow The Blackwidow paddle is a good addition for a kit built station. The kit went together well and operation is smooth. The hardest part of the build was finishing the brass components. A fun project. and the price is great. Looks good along side of the K2's and K1. Pictures of my finished Blackwidow at: http://00497f5.netsolhost.com/radio/Blackwid02.jpg http://00497f5.netsolhost.com/radio/Blackwid04.jpg John k7up ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] plexiglass
How about making our own Hex Key covers? Tony W7GO - Original Message - From: Ron D'Eau Claire [EMAIL PROTECTED] To: elecraft@mailman.qth.net Sent: Sunday, July 09, 2006 11:32 AM Subject: RE: [Elecraft] plexiglass The trick is often in cutting or drilling it cleanly and squarely without melting or scratching it, and in polishing the edges. The nice thing about a place like Tap Plastics is you take a template or dimensions to the store and in a few minutes you walk out with nicely cut, polished and even drilled materials ready to use! They'll even glue up assemblies requiring more than one piece. It's a great service! I'd be very surprised it was only available on the west coast of the USA. If so, I suspect it's a business someone could do very well with in our do-it-yourself culture. Ron AC7AC ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] High End Paddles
I have the BY-1 the Hex Key. I use a light touch on both. Tried a heavy touch with the Bencher. It's hard for me to imagine slapping it around enough to mess things up. That's some heavy use! Just my opinion. 73, Tony W7GO Vic K2VCO wrote: Darrell Bellerive wrote: Reading the Bencher web site it suggests that the BY-1 series is better for those using a light touch than the Hex Paddle, which is for those more used to a bug. I'll put it this way: the BY-1 is *only* good if you have a light touch! The Hex Key will work fine either way. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] High end paddles
Well I guess I'm going to have to order a Begali. Seems to clearly be the first choice here. But, which model? 73, Tony W7GO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] high end paddles
Also worth consideration is the Bencher Hex key available from Elecraft. I have the Bencher BY-1 and the Kent TP-1, both good keys but the Hex key is much smoother. (IMHO) 73, Tony W7GO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] high end paddles
Keith, I would say yes. The Kent has a mechanical feel and sound to it (which isn't necessarily bad). The Hex key is much quieter and smoother in operation. The Hex key of course uses magnets which gives it a totally different feel. The flex on the arms is not a factor if you don't slap it around. If you are heavy fisted, the Kent may be a better choice. I have quite a selection of paddles both iambic and single and my favorite is a Brown Bros BTL-A but that's another story. ;) 73, Tony W7GO Keith wrote: So, Tony, is the improvement going from Kent to the Hex key as great as the improvement going from the BY-1 to the Kent? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Re: QRP Antenna anyone?
I use one for mobile work on my Sonoma pu with a KX1. Works quite well. ;-) 73 Tony W7GO J F wrote: Backpackable, easy to setup ;o) http://www.pannondxc.hu/hamnews/hu/csoda/yagi80m5ele.jpg 73, Julius n2wn ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] KX1 Mojo /PM
That sounds liks fun John. My next project is to try /PM with the KX1. Not quite as exciting but I worked VK9LNO last night with the KX1 and a longwire on 30 mtrs. running about 3 watts. I'm still amazed by the little rig! 73 Tony W7GO - Original Message - From: n0evh [EMAIL PROTECTED] To: elecraft@mailman.qth.net Sent: Thursday, May 11, 2006 2:08 PM Subject: [Elecraft] KX1 Mojo /PM It started in FYBO 2004. I worked Paul W0RW in a snow pile in CO from my snow pile in MO and later found out he was /PM. What started? My thinking that someday I needed to stick a whip in my back pocket and try not to electrocute myself. Then I was running my K2, but now my KX1 is begging to go /PM. Last night I finally got around to it. Hustler whip in back pocket. KX1 on AA batts running full out at 2 watts. Sixteen foot drag wire and looking for signals on 20. Dog Josey standing by just in case I saw a bear. You know I've heard they like /PM hams. ATU tunes the hustler 1 to 1. Only one strong signal and he was chewing the rag on 14059. Was afraid that the band would die. Move up 1 kc and play memory one three times. Low and behold Chris comes back on 14.060 from PA. An 800 mile /PM QSO MO to PA on 2 watts /PM! And of course Chris was running his KX1, what else? Can't explain the mojo. Did someone say we were at the bottom of the cycle? John N0EVH (Every volt helps) See you all at Dayton ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] New License!
Congratulations on the new call John. The K2 is a great radio. Have fun Tony W7GO John Wiener wrote: Hey everybody! My new call is AB8WH...checked for it today on ARRL homepage. I haven't been this excited since I reached drinking age (!) I'm finally LEGAL! I finally got through First Alignment of my K2 and am just starting the unending cap soldering of the RF board...it's fun. John AB8WH ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Interesting tidbit...
Tom, You just made my day! Thanks : ) Tony W7GO Tom Hammond wrote: On Wednesday of next week, at two minutes and three seconds after 1:00 in the morning. The time and date will be: 01:02:03:04:05:06 This won't happen again for a thousand years. You may now return to your normal stuff! Regards, Tom ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K2 #5311 is alive!
It's like deja vu all over again. Tony W7GO - Original Message - From: Joe-aa4nn [EMAIL PROTECTED] To: Elecraft@mailman.qth.net Sent: Saturday, January 21, 2006 6:30 AM Subject: Re: [Elecraft] K2 #5311 is alive! Considering the superb mechanical engineering of the K2, one has to wonder why chassis screws aren't countersunk. de Joe, aa4nn ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] QRP viability during solar cycle min?
K9QRG ON 5/12? Just checking :) Tony W7GO - Original Message - From: Larry Makoski W2LJ [EMAIL PROTECTED] To: Darwin, Keith [EMAIL PROTECTED] Cc: Elecraft@mailman.qth.net Sent: Wednesday, January 11, 2006 4:54 PM Subject: Re: [Elecraft] QRP viability during solar cycle min? Darwin, Keith wrote: K1 or K2. Hmmm, the debate continues. But wait, we're approaching a sunspot min. My antennas are pretty limited. I have a 28 foot vertical (fed with a tuner near the base) for 40 thru 15 and a dipole at 25 feet but that is about it. No towers, no high wires, no yagis. How limiting will 5 or 10 watts (even with that Elecraft Mojo) be under current conditions? Are we entering into conditions where QRP with simple antennas will become rather frustrating? Is it K2/100 time? - Keith KD1E - ___ Keith, Fear not fellow Elecrafter! We QRPers laugh at the sunspot minimum! Sunspots .. who needs 'em? I know, actually we all do. But to be serious as bad as band conditions were in 2005, I managed to make at least one QRP CW QSO everyday in 2005. If you want to check out some of who I worked (and there was a goodly bit of DX mixed in) then please check out: http://www.qsl.net/w2lj/index%20page%209.html My antennas are not much more substantial (if any) than yours. I have a G5RV at 25 feet and a Butternut HF9V vertical which is ground mounted in the backyard. To me it seems that if you don't spend too much time concentrating on what you think are deficiencies; but go out with the aim to just have fun, then you will be amazed at what you can accomplish! 73 de Larry W2LJ K1# 1647, K2# 4090 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Emergency in 3 Land
I have the K2 and the KX1 which I really enjoy. I guess I'm going to have to get a K1 to see if you are telling the truth : ) Tony W7GO - Original Message - From: EricJ [EMAIL PROTECTED] To: 'John [K7SVV]' [EMAIL PROTECTED]; 'Mike Morrow' [EMAIL PROTECTED] Cc: elecraft@mailman.qth.net Sent: Saturday, December 24, 2005 10:32 AM Subject: RE: [Elecraft] Emergency in 3 Land I have them all too, and they each have their place. The KX1 is the most narrowly specialized. The K2 is the most capable. The K1 is my favorite. Its all-round capabilities and very sweet CW sound have never been a let down. Eric KE6US www.ke6us.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Stew Perry 160
Amazing what the K2 with 5 watts will do on 160! Tony W7GO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Stew Perry 160
What antenna are you using? I'm using a Spiro sloper model VS-64. Height is about 35' sloping to ground and using an 8' ground rod. Gets me on 160 and the at on the K2 tunes the rest of the bands pretty well. Tony W7GO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Cooling fans
I use four desk drawer bumper pads. They are sticky on one side to mount to the fan, round and about 3/8 diameter with enough friction to keep the fan in place. Works for me. Tony W7GO Jack Brindle wrote: It would be interesting to know what other folks have done to keep the fans in place. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Oh No!! Not another K2 Control Program!
I like it. : ) Tony W7GO James T. Jim Rogers, W4ATK wrote: What can I say. I wrote this one for me and BandScope fit real nicely into the options panel. If you want to see it take a look at http://webpages.charter.net/w4atkweb. Hey it ain't a fancy site, but it was free from my isp. Happy Hammin', Jim W4ATK ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Split indicator
Nope Fred Jensen wrote: OK folks, what am I missing here? There are so many things about my Elecraft radios I still don't understand or know how to use, but ... the little down-arrow blinks for me when I have held the SPLIT button down. I've always thought that was the indicator that I was in split mode. It did when I worked K7C. I just did when I tried it right now. Have I screwed up yet again? Fred K6DGW Auburn CA CM98lw Sverre Holm wrote: -Original Message- I have pictures of mine on my web site at http://www.qslnet.de/member/la3za/K2_LEDS.html --- The schematics of how the LEDs in the buttons for the SPLIT, zero-beat indicator and KAF2 indicator are wired can now be downloaded from the page above, see about halfways down the page. 73 Sverre LA3ZA http://www.qslnet.de/la3za/ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com