[Elecraft] DVR & monitor function
The DVR works great ... yet I have a question or suggestion... When I run SSB I have the monitor level turned to 0 ( off)... and then I do not hear the memory playback It is very strange knowing you are Xmiting, and not hearing what's going out. Could there be a way to set a monitor level for the playback of the memories??? different than the regular "monitor" level? Am I alone in this "blind xmit" thought? bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] Microphone Upgrade
But The Neumann looks so cool, and the dynamic range will do sound so great ... aside from the silky smooth freq response... ;) bill At 10:29 AM 12/15/2008, Jim Brown wrote: On Mon, 15 Dec 2008 09:02:20 -0500, Phil LaMarche wrote: >How about the RE 27 on the K3? ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Wiring the Shure 450 mic for K3
I thought those with concern or issues have already taken pin 7 & 8 to ground... "bypassing" the inductors and L7 on the rear mic input bill At 02:17 PM 12/19/2008, Iain MacDonnell - N6ML wrote: Hmm, but there has been a recommendation to connect the mic return and shield to the connector chassis, instead of using pin 7, to avoid the "pin 1 problem". http://n2.nabble.com/Microphone-ground-td1329465.html ~Iain ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Hardware Updates...TNX for hint
Thanks to the G; whomever it was,,, for the hint on the removal of the choke ( audio output mod). That was to turn the set upside down ... use my fantastic solder suckerthen drop the old part into the set . This rather than having to remove the 2ndRX to get to that choke. Then put the new part on the bottom. ... a 10 minute job. (yes I remembered to get the old part out.) It actually fell out on the table. bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Firmware Rev. 2.76: No AF noise burst
Thanks Wayne I always HATED that audio pop ever since solid state outputs now it turns on like it should like the expensive esoteric piece it is . Merry Christmas & Happy Holidays to all the crew... ( even Eric) bill visit my station @ http://picasaweb.google.com/Bill.SteffeySr/HamRadioNY9H ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] OT: Removing Solder Through Plated Through Holes
YEARS AGO... Prior to changing out the "unmatched" crystals for "matched" ones in my K2, I decided that it was time to buy that "solder sucker ... The HAKKO 808... the handheld powered vacuum sucker... I was concerned about the number of desolderings involved on the main board. AND IT was a GREAT idea. When it came time to do the audio mod,,, just sucked that solder out from the bottom and miraculously... the part fell out . Great to have around for all those projects repair and building ,,, esp when you make a mistake or two,, bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] How to escape the niche?
At 04:43 PM 1/3/2009, Guy Olinger, K2AV wrote: What niche? very well put Guy ,,, I hope they also provide parts to have a front facing spkr./s.. so we could have a matching front speakersI suppose if you could integrate into the same chassis that would be nice also could be narrow jobs,,, just tall enough for the same hi efficiency spkr now usedbonus bigger box could = more lows... Vertically narrow,for side use/mount, or laid horizontally both spkrs on top on k3 maybe another few pieces of steel for a "wide as a k3" dual spkr enclosure space in center for controls & leds of optional PS... H I may have to do this myself bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] dB Gain -- was RE: [K3] FLx GN Adding Db gain
my wife's car stereo has an adjustment for CDs it optionally reduces the dynamic range to you CAN hear it in the car, with all that ambient. bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Sub Rx idea
I'm certain Eric remembers that I asked him the same thing at Dayton when they first showed the K3... flip all the parameters back and forth between the two receivers... or something like that ... but we will have to wait in line for more important things...for a while bill At 08:40 PM 1/30/2009, Mike Scott wrote: >Content-Type: multipart/alternative; > boundary="=_NextPart_000_000F_01C9830A.3978CEE0" >Content-Language: en-us > >I have been using the K3 sub rx for a while now. >What I would like to see is a totally interchangeable main and sub. >I want to be able to switch sub for main in a way that the sub rx is >acting like the main without a shadow of a difference. Right now if >I press Sub I can change sub rx settings but I can't change >frequency for example. >I would like to be able to operate as if the Sub were main and the >Main were Sub and vice versus perhaps by pressing a single button. > >Mike Scott >AE6WA Tarzana, CA >K3/100 SN508 > >___ >Elecraft mailing list >Post to: Elecraft@mailman.qth.net >You must be a subscriber to post to the list. >Subscriber Info (Addr. Change, sub, unsub etc.): > http://mailman.qth.net/mailman/listinfo/elecraft > >Help: http://mailman.qth.net/subscribers.htm >Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] OT: RF Clipper "works with Elecraft"
ever since I out a G3LLL RF clipper in my first transceiver,,, and saw the difference... I was convinced how effective RF clipping can be. G3LLL was careful to indicate that you should roll off the bottom end... so as to not totally overburden your powersupply with the extended "duty cycle" using such a device on ssb. I have played with and still have Datong, Daiwa, MFJ and TenTec's earlier rf clippers. When set properly you will NOT get complaints of turn off that processor... just compliments. Most recently using a slightly modified TenTec version. With the latest iterations from Lyle on the K3...making it 'crunch' better, I will be soon be looking for new home for the pile. google on "RF processing ssb" something to understand and appreciate on the K3 or other radios. and I HATE bad audio... nasty clipping effects, distracting distortions...etc bill __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3: A nice black cover to hide the front panel MIC socket
> black vinyl cover caps made for SO-239 connectors:snap tightly over >the mic socket. these work great... i use the red version to put on mic connectors of several rigs that are receive only ... ( and sharing a receive multicoupler ) to remind me DON'T PLUG A MIC HERE...after snuffing the Q in the multicoupler. BILL __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] (no subject) fans on startup ???
Could it be the fans, when I power up they briefly turn on... bill At 10:30 PM 3/3/2009, Daniel B Beugelmans Md wrote: >Dear K3 reflector- > >I have a question regarding my new to me K3- 100 with ATU. Although >it seems to work well, when I turn it on, I hear a fairly loud high >pitched motor-like almost hissing sound, lasting for about two >seconds. This sound is not always the same loudness, but is nearly >always there. This happens whether the ATU is off or on, and with >nothing connected to my transceiver except for the power supply and >antenna. My transceiver is in the 600 series serial number range, >and is stock except for the ATU, TCXO, 100 watt module, and a 400 HZ >8 pole filter. I seems to come from the right side of the >rig. Should I be concerned? I am using latest firmware. > >Thanks, > >Dan > > > >__ >Elecraft mailing list >Home: http://mailman.qth.net/mailman/listinfo/elecraft >Help: http://mailman.qth.net/mmfaq.htm >Post: mailto:Elecraft@mailman.qth.net > >This list hosted by: http://www.qsl.net >Please help support this email list: http://www.qsl.net/donate.html __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 + LP Pan + Microkeyer II
great explanations... i use a MK2+ also...for the K3 & an ICOM. works great ! but for the lpPan I use the Roland Edirol FA66"sound card" the SDR IQ has it's own ... I also happen to use a emu 202 for feeding the station's stereo system. much better than the "resident" motherboard sound card bill __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] AF CONTROLS placement,,,, revisited
going for glorosio for 17 meters while split ... I think i'd much prefer the front of the two concentrics to be AF main ( bottom) and AF sub top as I find myself constantly reaching behind to change the level of the sub channel while hunting .. someone recently suggested a menu setting to flip something to attain the same goal. having the balance in front .( i think )...or maybe both AFs in front . AND yes I also peeked at the backplane to see abt a pcb mod... which would be more appropriate in SW. I reverted to another older rig where the two rcvrs have separate pots and the af is in front of the rf seems more intuitive and easier,. k3#49 bill __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] RFI noise
At 02:08 PM 9/24/2009, William Carver wrote: >I lost a PC power su filter parts missing from production power suppliesprobably after agency certifications. RSGB's magazine has been on this issue for many months with pictures etc I believe that they had not much concern from their OFCOM on the issue. I would think the FCC would not take well to being "frauded" ...in this fashion. I'd copy the list with your brand names & model numbers,, do copy the RFI list and let the folks at Tiger Direct they got shipped 'defective" fraudulent goods as well... back to Ft5ga bill __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] sub receiver question... 3db loss w/ 2 rcvrs
I heard an ICOM employee explain that the 7700 was better than the 7800 because the 7700 did not have the 3db loss ... because it only had one receiver in the 7700 ! wow ..that must make it a "contest set" . i certainly don't mind the split loss in the 7800 or the k3.. I had installed one in my 756pro3 so i could have a real 2nd receiver. and actually use a minicircuits in the K3 IF out so I can feed both my LP-PAn & the SDR/IQ... I like rocky on the LPpan bill __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 Noise Reduction..revisited
I have two "Hear-it" speakers from England's BHI company hooked thru my microham controller's headphone outputwhich is connected to the 7800 & the K3. With a low- mid aggressive setting they don't sound anything but quieter. (what a concept)... leave them in line most all the time. No gurgling, whooshing... or D-Star audio emulations. (Much better than the NCT licensed stuff Clearspeech/Heil now West Mountain Radio). Granted if I was using a GrandioseSweetness18" 3 way, I might have a different outcome. Then again I could pipe it thru my UREI "time-aligned" monitors. 40 years in the audio business.tells me the BHI algorithm is a winner whatever they are doing ...I wish Lyle would do ( if the DSP can handle it ) And I do know the existing design does it the other way . Seems we revisit this one about every 118 days.. bill __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] who owns more than one K2, and why?
started out with sn#260,,, as a qrp /mobile/battery system in a pelican case then added the KA100/ KAT 100 in an EC2 enclosure. Then I perforated the front of the EC2 for two elipitical speakers...on the front. That also in a pelican case then I obtained a sn#3200 k2/100 with external tuner.. for the shack station along side an Icom. The station K2 got replaced by a K3... so I need to figure out which set to sell... or maybe both . and this is how I ended up with 2 k2s. bill K3 field case http://picasaweb.google.com/Bill.SteffeySr/ElecraftK3FieldCase K3 ASSEMBLY PIX @ http://picasaweb.google.com/Bill.SteffeySr/K3 NY9H STATION PIX @ http://picasaweb.google.com/Bill.SteffeySr/HamRadioNY9H __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] K3 VFO Tuning Rates
2 votes for a good ballistic tuning VFO , ( defeatable) icom does do it very well on the 756 & 7800 bill ny9h __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Yaesu versus Elecraft Service
I believe that when YOUR TAX dollars purchase radios for your fire & police departments that one of the big "American" vendors..indicates that in 6 years they will no longer support the radios. AND THEY GET MILLIONS FOR THOSE SYSTEMS.Too bad our 35 year old 5 community police repeater system from the same factory is still going great,,, And I believe that ICOM does 'allow' us to speak with technicians. bill At 04:09 PM 7/5/2009, Nelson Moyer wrote: >Yaesu is selling disposable radios. I called about sending in my eight year >old FT-100D for repair and was told they no longer support the FT-100. Why >would anyone spend 12K on a Yaesu radio that will be obsolete in less than >eight years? > >My experience with Elecraft service, on the other hand, has been stellar. > >Nelson, KU0A > >-Original Message- >From: elecraft-boun...@mailman.qth.net >[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dick Williams >Sent: Sunday, July 05, 2009 3:15 PM >To: elecraft@mailman.qth.net >Subject: Re: [Elecraft] Yaesu versus Elecraft Service > >Jim, > >All the more reason to buy American products! I owned a couple of Yaseu HF > >rigs in the past and I was more than dis-pleased with their service dept. >In one instance, the SWR protection circuit went out in my 1000D; sent it >back telling them what the problem was (or what caused the final transistors > >to burn out). I even called and was told that, "O yes" the purported tech >I talked to said that the radio was fixed right. Well, when I got it back, >all they did was replace the finals. > >As far as I am concerned, any ham who buys a Yaesu or Icom HF radio is a >fool and uninformed. Both the K3 and O2 will run circles around any of the >other rigs (maybe with the exception of the SDR radios). > >And when you talk about service, both Ten Tec and Elecraft are top notch. >You are so right when you say you get to talk to a tech, not some idiot that > >is a "go between" and not familiar with the radio. > >That is my "2 cents" worth". > >Dick K8ZTT > >PS Unfotunately we don't have a lot of choices with the VHF/UHF equipment, >but at least it is not a big investment if it goes up in smoke. > > >- Original Message - >From: "Jim Garland" <4cx2...@muohio.edu> >To: >Sent: Sunday, July 05, 2009 11:36 AM >Subject: [Elecraft] Yaesu versus Elecraft Service > > > > (Copy of a posting I sent today to the Yaesu FT-2000 reflector, > > contrasting > > Yaesu and Elecraft technical support. I believe it speaks for itself.) > > > > > > > > _ > > > > From: Jim Garland [mailto:4cx2...@muohio.edu] > > Sent: Sunday, July 05, 2009 11:22 AM > > To: 'ft-2...@yahoogroups.com' > > Subject: Update: Yaesu Service > > > > > > > > Two weeks ago I posted a note here about Yaesu's policy of not allowing > > customers to speak to service technicians, instead referring inquiries to > > customer support personnel who were unfamiliar with the inner workings of > > Yaesu products. This is the same policy used by auto dealers, who insert a > > "customer service manager" between a customer and mechanic, or computer > > manufacturers whose support personnel answer technical questions by > > reading > > from a prepared script. > > > > > > > > In my case, I had questions about the first mixer stage in my FT-2000D, > > which I suspected had failed. I had traced the signal path to the mixer > > with > > an oscilloscope, but wasn't sure how to interpret the output signal. I > > couldn't tell from the circuit diagram how much bias current the mixer > > FETs > > were supposed to draw, what the conversion loss from the mixer was (after > > taking into account losses and turns ratios of the coupling transformers), > > whether this was a common failure mode in the radio and what the likely > > cause was, and whether there were any useful pointers in replacing the > > tiny > > surface mount mixer IC. > > > > > > > > Unable to get anwers, I didn't want to take a chance plunging ahead with > > the > > repair myself, so I ended up sending the radio back to Yaesu. The repair > > bill came to $187 plus another $90 round trip shipping. Incidentally, the > > first mixer is nothing special; it is a garden variety IC that costs about > > $4. > > > > > > > > By coincidence, I also had a failure in my Elecraft K3, which had suddenly > > stopped transmitting during a recent 6m contest. I called Elecraft and was > > immediately put through to a service technician. I explained my problem > > and > > he asked me a few questions about my electronics background and what sort > > of > > test equipment I had on my workbench. He decided that I had enough enough > > experience to fix the problem myself, and we agreed that I would call him > > back after putting my K3 on my test bench and removing the covers. > > > > > > > > Later that day, I called him back and, together, we traced the signal path > > through the transmitter. I had the phone in one hand and a scope probe in > > the other. In a matter of 20 mi
Re: [Elecraft] K3: IN STOCK machined concentric knobs
i knew there was a reason to buy those old Wavetek generators for $ 20...at the club auction. one works... one dead ,,,but what a supply of nice machined knobs. The fit the shafts ...perfectly... a tad big and gray Look around your piles of stuff, you might find something that fit perfectly for field day,this gray color might be great to highlight the af/balance controls. the position indicators are cut into the front face of the controls, so if you can see the knob, you see where it is set.(nice)..( now to machine them down a bit.)bil If I ever finish them ( black anodize) I'll make pictures,,, bill( with another broken knob, & waiting till the 'new' ones appear,) __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
Re: [Elecraft] Wish list...
At 07:52 PM 3/10/2008, Dave G. wrote: One wish --- and I don't even have a K3 yet... A "General" register stack... for BBC, Radio Australia, etc.. and wgnwbbmwwv . oh. that is where the 80 meter band went :) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K3 Firmware downloads
much like other radio/s... You will not find the necessity of " going back" to retrieve a stable version. None of the changes has had me EVER thinking I wanted to go backwards. bill. At 11:57 PM 3/15/2008, Dick Dievendorff wrote: Each firmware version completely replaces its predecessor. There is no need to load each intermediate version, just the most recent available. Dick, K6KR ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] WAS K3/10 For Sale or Trade; NOW rev BUTTON
During Clipperton & Ducie I found myself, ( AS DID SEVERAL OTHERS :( ) out of band calling after I managed to hit the UN-split button missing the REV button. I don't need any help looking stupid. Using the single rcvr SUB button as REV makes great sense to me. bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Katiegram - Stay or go, yes or no
At 10:22 AM 3/27/2008, Darwin, Keith wrote: Just call me Mr. Waffle. I feel like a kid who has climbed the high-dive and is standing with his toes hanging over the edge of the board, nervous and unsure JUMP IN THE WATERS FINE.. & the radio is great also. bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] OT: UPS Rates - Editorial Comment
Damon, KC5CQW wrote "BTW, I just found out that UPS ground shipping with insurance to Elecraft is about $48!!! I think I got ripped off! I just hope the repairs are simple! " ANY BIG shipper... probably not elecraft ( too small) can get BIG discounts from UPS.Probably fedx also. So a published price & the price you and I Pay to ship a box might be $ 21.00. A big shipper might get 40-50 % off list Then of course they don't have to PASS THAT ON TO YOU. BUT RATHER ADD TO THE warehouse costs of doing business. or more accurately reduce costs... Wars probably go on as to which department get to take the difference. Some companies that add freight to the bill actually only charge actual costs... not the published cost. bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 power supply question.. PPCRIMPER
At 06:41 AM 4/1/2008, Phil & Debbie Salas wrote: Get the PwrCrimp from West Mountain Radio.YES. -- After reading the ad copy about gooey black tape on your 12 v connections; and "avoid having a hi amp 12vdc short & fire". I WAS SOLD ON POWERPOLES I had the gooey black tape on my console wiring... nasty & ugly.. and I had a line of #20 short ...for a while causing a very red set of wires...and smokenot good in a wood console. After crimping 40- or 50 by the "10$" crimper & got the good one... It creates a fantastic crimp & I still sometimes touch the front side with solder. Just a touch, or it will flow onto the contact surface bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K2 Microphone Help Needed
whomever gave you the radio wired it for a particular mic configuration ( elecraft/kenwood or Icom or ? )contact the giver/builder and find out how he configured the mic jumpers/connector. It will save a bunch of time . If he wired it for ICOM mics, as I did , just grab any icom hand mic. bill At 11:37 AM 4/7/2008, Don Ehrlich wrote: Kerry, Go to the Elecraft site and download the manual for the K2 SSB adapter and read it. The situation is more complicated than you may expect and you need to know about h ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] troubleshooting the KNB2.... A VIDEO
I have had problems with powerline noise... and the K2 NB can have a big difference. If you have many multiple sources of noise, maybe not. But here is a 'youtube' of my noise blanker on & off... with a 7800 scope picture of the noise Worked great on THIS example if powerline noise. http://www.youtube.com/watch?v=1JRiuzVCjKQ bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] re supply of handmic for K3 with UP/Down frequency feature
As I goy my k3 #44 i wired up a spare Shure 414b... it's a mini hand held mic with very sharp audio... as fern noticed great without touching the eq settings & no bias required Keep you eyes open for used ones, as they are oops ( i just make that up ) ...out of production sorry bill ny9h At 06:56 PM 4/16/2008, Fern Rivard wrote: For anyone interested in getting good quality dynamic hand microphone with UP/DOWN frequency select, I will be able to supply those. I was never a fan of elecret microphone and much prefer dynamic microphones. My choice desk mic is the Shure 4 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] kx1 on airlines
At 04:09 PM 4/22/2008, Jeff Kinzli N6GQ wrote: I've traveled with my With my K2 qrp with SLA in a pelican case with antenna wires etc I went from Chicago to London to Cairo,then Cairo thru Stuttgart to Barcelona then a boat to Lisbon... and air back to London to Chicago Only at London Heathrow on the return trip did they want to see what the Xray could not go thru ( the sla)... they had me open it up in the baggage handling area At SU9FL, Greg hooked it to the Vertical on the roof and worked JA on 40 !!! ... used it in all the approved places including on the boat. bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] kx1 on airlines
At 05:20 PM 4/22/2008, K9ZTV wrote: Took a KX1 to Maui last O The only suspicions I .. while in the Caribbean,, on a VERY big boat.. I had the k2's antenna sticking out on a extended tent pole from the room's balcony, the guy in the room next door asked if the fishing line dropping down three decks but not hitting the water had lost it's lure. ...e not exactly... bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 - Proset K2 Mic Frequency Response
nice chart looks like the results are from a Bruel & Kjaer. But can you explain what sort of "chamber" was used, maybe it is a left over from the "psychedelic" days ... Shure Bros , AKG & Sennheiser use an Anechoic... (n. anechoic chamber is a shielded room designed to attenuate waves) No sure what tests do you do in an "anabolic chamber"but i don't want to do the testing. Must be a Southern Illinois thing. First saw this about 5 years ago in a CQ magazine review. Guess you just can't always believe what a graph says bill At 05:01 PM 6/6/2008, Eric Swartz - WA6HHQ, Elecraft wrote: I've placed the frequency response chart for the MH2 and Proset-K2 on the web site. See: http://www.elecraft.com/elecraft_mics.htm 73, Eric WA6HHQ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Field CASE & PORTABLE QRp +Battery
I was somewhat fearful of taking my K3 to field day without "protection". we all know how important that is these days. :) So I made a "field case" for th K3 ... and one for a pair of 7ah batteries all fits into pelican 1520 Aside from a minor concern of not adequately cooling the right side panel with the pair of regulators mounted...( wayne??), I think I covered all the bases Still working on 'finishing' the case and integrate a pair of speakers in the lid... take a look bill K3 field case http://picasaweb.google.com/Bill.SteffeySr/ElecraftK3FieldCase ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Switching Supplies & KRX UPS shipping notice
the fan on the ity bitty gamma research "super Cap " supply is VERY quiet. and worked well for the field day K3 GOTA station and just got the UPS SHIPPING NOTICE for KRX3 !! bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] Re: RF Coupleing
that is why the Top Ten AB antenna switches use two relays to gain isolation... bill At 02:04 PM 7/17/2008, Jim Brown wrote: On Wed, 16 Jul 2008 21:15:14 -0700, Ron D'Eau Claire wrote: >In this case Eric is saying there may be a leakage path through a relay. Right. Almost all problems have more than one component. In problems like this one, the sum is the algebraic sum of all of the leakage paths. Relays DO have capacitively coupled leakage. I think I'm hearing numbers on the order of -60 dB, which is pretty respectable for an antenna relay or switch. I've measured numbers on the order of -50 - -55 with the Alpha Delta switches. 73, Jim K9YC ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Fwd: Re: [Elecraft] Re: K3 sub rx for BDCST.
REGARDING comment about broadcast band attenuation in the txrx pin diodes///thur the regular ant 1 & 2 i guess using the bnc on sub rx is the easy/best way for me to "do" broadcast ??? bill response from Wayne That's true, Bill. If you go straight to the sub receiver through its AUX RF jack, there are no PIN diodes and no high-pass filter. 73, Wayne N6KR bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] KRX3 - I mess up the installation- need help
i do not think that is yet enabled wayne made a comment the other day saying something to the effect of " when it will work " suggests it does not work yet ... mine does not yet either and reports the same comment Johnny. bill At 08:50 AM 7/19/2008, Johnny Siu wrote: Hello David, Yes, I now fix my first problem but: 1. in CONFIG: VFO IND, I still cannot turn to 'yes'. The message on the window of VFO B is 'no sub' 2. calibration of 2nd synthesier still give an error message 'E39 ERR VC4" 73 Johnny VR2XMC Yahoo! [EMAIL PROTECTED] ¹q¶l¦a§}¡A·Qµn°O§Aªº·s¨¥÷? ½Ð«e©¹ http://hk.promo.yahoo.com/mail/ymail/ ¤F¸Ñ§ó¦h¬ÛÃö¸ê°T! ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] rtty and MK2R+ K-3
my "lin out" is set to nor 025 and the MK2r "recording/ digital" controls on the bottom right front panel are set about 12 high and all my apps have great audio input bill At 08:32 PM 7/19/2008, Lyle Johnson wrote: Is there a "trick" to shut off headphone audio and take it off the back. Audio is simultaneously available at front and rear headphone jacks, and at the LINE OUT jack. Nothing special need be done. CONFIG:LIN OUT and sets the LINE OUT level (nor 10, for example). You can safely insert headphones into the LINE OUT jack and verify there is audio coming out. It will probably be low in level, but present. To keep distortion to a minimum, use a level of 10 or less when feeding the sound card input. Remember LINE OUT on the K3 is receiver audio from the K3 to the PC and should go to the LINE IN connector on the PC soundcard. LINE IN is transmit audio to the K3 and should come from LINE OUT on the PC. If there is no audio at the K3's LINE OUT connector, even with the level set quite high (50, for example), email k3support. If there is audio, then the problem is not in the K3. 73, Lyle KK7P ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] K3 Microhpone
At 11:23 PM 8/8/2008, Charles Harpole wrote: Real serious hams use Heil headphone/mic set. What I believe, my opinion after selling microphones since 1981, for Sennheiser ..then AKG then Shure Brothers is different. Our firm was their exclusive agent in Illinois & Wisconson, so we sold tens of thousands,,, ( if you count the SM58). Many ""real serious"" appliance operators do not know how to wire up a microphone, much less grab an electret element and assemble their own microphone. Which is not to say there is something wrong with being an appliance operator; but not all "real serious " hams use heil products. MANY Real serious audio hams use AKG & Sennheiser and some of the Shure product line, from companies that have engineers and anechoic chambers . ( and actually manufacture the mic element, not just the case) Some of heils product graphs were marked as being made in an anabolic chamber. You best look up that one. Even the magazine articles. Bob had done a great job awakening the ham community to difference a mic can make. The rising hi end frequency responsehowever is something Al Gore invented and licensed it to Shure Bros in the 50s for their # 444 and other communication & paging microphones. I use a mini 414b handheld for my K3 which you can drive a truck over has one of those "million-cycle" switches...and has fantastic audiofor SSB. too bad it was discontinued years ago many hamfests have a larger similiar 'paging' product, and they sell for 5$ at the hamfests, marked Johnson, RCA, or areoflex..or some other American radio company who bought them from Shure. http://www.shure.com/ProAudio/Products/WiredMicrophones/us_pro_514B_content LOUD & CLEAR go rip out an electret element from a discarded telephone and surprise yourself ranting off bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] KRX3 Issue - Jumper W4.... rtfm
It IS in the instructions that our older boards had a wire which needed to be cut and that jumper is indeed partially hidden by the bandpass board, That jumper's location could be better identified in the instructions, as I recall it is to the rear of that jumper block, not in front of it . It went in fine and does work great still calmly awaiting the firmware to allow being able to split it off to another band. bill At 03:06 PM 8/24/2008, Jim Denneny wrote: I could not get KRX3 or Main to RX after KRX3 install. After checks and rechecks with Rene of Elecraft, we discovered the W4 jumper had not been removed. Now here is the "gotcha". Manual shows jumper across two pins of a connector. I saw none and moved on. My RF board is a Rev A. The KBPF3 module mounts over the top of the RF board. Guess what? The KBPF3 board covers the W4 jumper which is soldered to the RF board. Cut the jumper and RX comes alive. I wish to thank Rene for his exemplary support. He called me on a SUNDAY and spent hours on the phone sleuthing this problem. Do you think K-I-Y would help you like that on Sunday? Jim K7EG ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 competition from Icom 7700? yes
Of course it is competition ( IC 7700 ), as some will buy it rather than the K3. It is however an apples and oranges comparison... The 7700 has "dual watch" which is just like the 756PIII, much better than no second receiverbut far far from a full second receiver( it can't split the main & dual watch audio, just vary the audio level between the two) still need the 7800 for 2 receivers. The Pro3 is a great piece of product extremely well executed. The Pro3 scope I prefer to the scope on the 7800.maybe the 7700 is different. I use a "scope" on the K3 now LP-PAN &/or SDR-IQ works great. As far a performance parameters...you can read, bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] KRX3 Issue - Jumper W4.... rtfm
nope, the jumper it is NOT between , as described in the manual I sent this note to support :on July 16th,,, the w4 jumper is NOT between the w4 jumper block and the Kio boards, I kept looking to make certain i was looking at the w4 jumper(which I was) and you do need to take out the general coverage board to get access to clip it ( w4) cleanly... it went right into # 44 bill And since it was contradictory to the instructions in the manual i rechecked it a zillion times ... checked the schemo... then cut w4 For Ron I have attached a pix, which will get stripped by the reflector for the crowd. While there is a jumper located as described , W4 is just in front of the connector. bill At 10:42 AM 8/25/2008, Ron D'Eau Claire wrote: Yep. The soldered jumper on the older boards is between the connector and the KIO3 board. There's an arrow and callout in Figure 39 in the KRX3 manual showing where it is. Early on Wayne moved it to a plug-in jumper in the connector because it was hard to get to the soldered jumper on the RF board. Besides, if one wanted to use the K3 with the KRX3 removed it's necessary to replace that jumper as described in the manual. Ron AC7AC -Original Message- It IS in the instructions that our older boards had a wire which needed to be cut and that jumper is indeed partially hidden by the bandpass board, That jumper's location could be better identified in the instructions, as I recall it is to the rear of that jumper block, not in front of it . It went in fine and does work great still calmly awaiting the firmware to allow being able to split it off to another band. bill At 03:06 PM 8/24/2008, Jim Denneny wrote: >I could not get KRX3 or Main to RX after KRX3 install. After checks >and rechecks with Rene of Elecraft, we discovered the W4 jumper had not >been removed. > >Now here is the "gotcha". Manual shows jumper across two pins of a >connector. I saw none and moved on. My RF board is a Rev A. The >KBPF3 module mounts over the top of the RF board. Guess what? The >KBPF3 board covers the W4 jumper which is soldered to the RF board. >Cut the jumper and RX comes alive. > >I wish to thank Rene for his exemplary support. He called me on a >SUNDAY and spent hours on the phone sleuthing this problem. Do you >think K-I-Y would help you like that on Sunday? > >Jim >K7EG ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Re: Legacy Ports
At 02:47 PM 8/25/2008, Ken N9VV wrote: re: "antiquated serial ports" (hihihi) well Intel and Microsoft declared them "Legacy Ports" in their Motherboard build specification in 1998 if THEY had their way we'd be buying new radios every 120 days. Thanks goodness this is NOT the computer industry. Think of all the names that could NOT weather the product cycle storm. bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Digital audio out ?
isn't cheap but good audio & a serial port , too bad I don't know how to program a remote front end for the k3,, Hell Simon.. http://www.barix.com/index.php?linkid=421 I believe you can use it at one end and another OR a cpu at the other end bill At 08:17 AM 9/5/2008, Julian, G4ILO wrote: David Cutter wrote: > > Somebody said they didn't care what the stream was, it could be dealt with > externally, so, could we tap off the relevant signal, thro an off-board > buffer and take it to a new socket on the back? > > We don't care about the sample rate or bit depth too much, but the data needs to be obtainable by the computer in a manageable way, such as through an extension of the existing CAT command set. Given the choice of modifying their K3 or just plugging something into the back, I think most people would opt for the latter, even though it would entail an unnecessary D to A and back to D again step. - Julian, G4ILO. K2 #392 K3 #222. http://www.g4ilo.com/ G4ILO's Shack http://www.ham-directory.com/ Ham Directoryhttp://www.g4ilo.com/kcomm.html KComm for Elecraft K2 and K3 -- View this message in context: http://n2.nabble.com/K3-Digital-audio-out---tp838886p841150.html Sent from the Elecraft mailing list archive at Nabble.com. ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] KRX3 Installation Step
yes yes yes. this note is CORRECT...for #44. in front of J64, and just under the back edge of the KBPF board bill At 07:47 AM 9/8/2008, Dick Dievendorff wrote: The current version of the KRX3 installation instructions errata has this item: Page 34, Figure 39: Delete the note and arrow on the left side starting with "On some older K3 RF Boards...". Insert the following note: "If jumper W4 is not in J64A as shown, it is hard wired on the RF board in front of J64A near to toroid L33. You may need to remove the KBPF3 board temporarily to cut and remove the jumper." Dick, K6KR -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Roy Morris Sent: Monday, September 08, 2008 5:01 AM To: elecraft@mailman.qth.net Subject: [Elecraft] KRX3 Installation Step On page 34 of the Installation and Opeation manual it says to remove the W4 jumber soldered between two pads located between J64A and the KIO3 board. My K3 RF board is Rev A. W4 is hard wired between two pads located between J64A and the KBPF3 board mounted above the K3 RF board. It looks as if I am going to have to temporarily remove the KBPF3 board to remove this jumper. Am I missing something here? Roy Morris W4WFB ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Re: K3 Topics
subject lines could be " standardized" or "grouped" . K3 or K2X ie: K3 wish list , ( includes redesigning the K3 because it works fine now ) K3 filters K3 alc that would help those who can only see the subject line bill At 09:42 AM 9/9/2008, Ralph Tyrrell wrote: Most of these add ons I have no interest in. BUT I am glad to know that there are there. Some day I may want to know how to hook up one. These add ons are an extention of ELECRAFT. The delete key is used often. 73, Ty, W1TF, K3 $696 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] EC3? ec3sp??
about 6-8 " wide... with grilles for 2 spkrsfront facing, of course. like the EC2/kat100/kpa100 for my K2 http://picasaweb.google.com/Bill.SteffeySr/K3#5164773634425387490 It is about the right size for the LCD / panadapter also. :) bill At 11:08 AM 9/25/2008, [EMAIL PROTECTED] wrote: I know that you can get an empty case, the ec2 to match the k2 I just asked elecraft if there were any plans to market a case (ec3?) to match the K3:- >I do not know of any plans at this time, but I will certainly pass along >your interest and we'll see if there is enough interest to consider it >in the future. >Lisa Anyone with similar needs might like to express their interest to them I want to put a 12V smps in one . The ec2 doesnt look right alongside a K3! Dave WW2R ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] keyer with CW decode & memory programming
if you use the K3's internal keyer (paddle input). It doesn't work when straight key or external keyer. The Manual could be more definite on this point, it seems to come up often. Bob NW8L AND... as I forgot yesterday, your paddle hooked up to your keyer will NOT program the K3 internal memories eithergotta be direct to the K3 paddle input. bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] k3 : Split Operation
when clicking on a DX4WIN spot, I now need to click twice... once for the freq and a second time if the mode is different also when split is called for, the vfo b gets it , but the K3 only flashes "split" then retains the non split mode. The ICOM goes to split and gets the vfo freq & mode , as one would expect. bill At 11:56 AM 10/5/2008, Joe Subich, W4TV wrote: Not only does A>B fail to transfer mode, "CW in SSB" does not work on VFO B. Its time to fix the user interface to transfer mode with frequency. > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Kenneth Waites > Sent: Sunday, October 05, 2008 8:57 AM > To: Elecraft@mailman.qth.net > Subject: [Elecraft] k3 : Split Operation > > > Frequently when I split on CW, I find I have to go thru the > steps of changing the mode on VFO B. > > Why not have a feature that switches it to CW if I hit the > key within 5 seconds? > > Ken K5WK > ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] flashing NB icon question
I know I read about it somewhere but cannot find it when I turn on the IF NB ...the NB flashes, not the dsp nb... did it mean too much garbage to fix ?? not all the time in fact It just stopped doing that ,,,ARG so If my current noise is handled best by dsp 2-7 that is indicating that the garbage is X wide ??? bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] flashing NB icon question
Thanks lain, I knew I read it somewhere,,, but Not on my page 25.. NOV 07 v C1 JUST DON'T CUT IT ANYMORE. Just loaded the current manual TADA. Thanks... I best see what else I've been missing. GOOD REMINDER TO HAVE THE CURRENT MANUAL if you have the current software,,, bill At 12:30 PM 10/9/2008, Iain MacDonnell - K6IAM wrote: Page 25 of the owner's manual says "(i) The NB icon will flash slowly if the I.F. blanker setting is too high for the present signal conditions. If this happens, use a lower setting." ~Iain Bill NY9H wrote: I know I read about it somewhere but cannot find it when I turn on the IF NB ...the NB flashes, not the dsp nb... did it mean too much garbage to fix ?? not all the time in fact It just stopped doing that ,,,ARG so If my current noise is handled best by dsp 2-7 that is indicating that the garbage is X wide ??? bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 split ops... & filters
When I do the double hit on 'split' I move the freq & mode to vfo B. ( good) It also tell VFOb ( 2nd rcvr) to go to filter # 4 to which my vfo A was 'set' , causing the sub rcvr to go dead, since I don't have a #4 on the sub rcvr. Is there a way to force Filter # 2 on... in the sub rcvr bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: Fwd: [Elecraft] ATU vs. External Tuner - Please
At 12:47 PM 10/26/2008, [EMAIL PROTECTED] wrote: All of the suggestions so far are good; however, it sure would be great if Elecraft would offer a true remote tuner that can be mounted at the antenna feedpoint. This might even alleviate the need for some of us to consider a KPA800, etc. or does it illuminate a need for two remote tuners100 watt and later a 2 killerwatt for the kpa1500.. both viable worldwide marketsfor all brands of stuff ... and small enough not to be factory builtKITS YEA !!! bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] PF->RX EQ setting on K3
abt a month ago I wrote a long response on why not a parametric eq for cw ??? but trashed it . for cw would not a parametric implementation be better than the "graphic" audio eq ? or is that already happening in the dsp ??? bill At 02:28 PM 11/7/2008, Igor Sokolov wrote: In fact digi setting can also be different. May be saving EQ settings along with other settings as "profile" in M1-M4 would be handy. Rec button could be used for resetting to default. 73, Igor UA9CDC For CW reception of weak 160m DX, I recently tried tweaking up the RX EQ so that the sidetone frequency is enhanced and other frequencies are attenuated. I think this works quite well as a primitive extra audio filter. While the settings are great for CW, they are no good (obviously) for speech. Does anyone know if such a "home brew" AF filter CW response curve setting could be stored using say PF1 button, and then be reset to a flat response using say PF2? Otherwise it gets fiddly and time-consuming to keep tweaking each of the eight filter frequencies. This would be handy 73 Geoff G3XGC ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Suggestion To Elecraft TX flash too small ???
"TX" is blinking hard to see Unfortunately, this can not be done. The display...Don't expect this to happen. IF elecraft decided it is a real issue.. they COULD make the FREQUENCY OR all of the elements flashing on & off to remind us that " IT AIN'T GONNA XMIT" YOU TURNED IT OFF,," bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] [K3] KRX3 Antenna Flexibility
At 11:32 PM 11/16/2008, Benny Aumala wrote: Those high priced splitter units ($50) include box and BNC connectors. If you do not want to build from stratch, try this for $14.20 : http://www.minicircuits.com/pdfs/PSC-2-1.pdf * $7.50 & shipping... http://www.alltronics.com check it out,,, I've never dealt with this outfit ... but did order from them today. bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 shippiing along
got the verification email day before yesterday, asking to check out my order followed by an acknowledgement saying I would hear within the next two weeks,.,,, Keeping in mind my was ordered on 4 / 27.with half payment; SHIPPED LAST NIGHT AT 9:45 PM.. tick tick, I'll follow Riley Hollingsworth's suggestion: take a deep breath and "go rake ( mow) the lawn" bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Phantom K3 ????
why look out side .it's a bird it's a plane NO it's MR. UPS. AND HE HAS THE WHITE BOX, the early bird GOT the BIG WHITE BOX TODAY,, SN TO FOLLOW bill ny9h ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3: SN56 qrv, but.....
ok ok 44 is alive and well, in Chicagoland still qrpmaybe KPA today.. 1 Q was 3DA0TM 2 Q pj2/k8nd took my time, breaking even to listen to my wife play the piano... she knew i was working on the k3 and was impressed,(duh) 7-9 hours sounds rightall the stuff went together as it was supposed to.. Awfully quite...quiet ... the filters are really as neat as the hype.as they travel from one to another. Using a shure 414b hand mic... doesn't even need the bias on !! great audio reports maybe today the KPA and time to do measurements for the Pelican certainly the K3 requires the best,.( so did the k2 ) pictures to folllow later after i get the kpa done... bill SN 44 At 04:49 AM 11/16/2007, DOUGLAS ZWIEBEL wrote: Maybe I'm behind in my emails, but last I saw (I think), #37 was received. How'd we get to 56? Where are all of the "missing" SN? Just curious. de Doug KR2Q ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] [K2] Plantronics Gamecon 1 Headset
that statement ( from Plantronics) is so marketing The last thing Plantronics wants is to have dispatch centers who pay 160-300 per headset DISCOVER how to integrate mass marketed PC marketed ( read low pricepoint) microphones into their systems. Yes they may be built to endure a tougher environment. . I've very successfully used .99 radio shack electret elements with both my k2 and my 7800...haven't hooked it to the K3 yetfrequently using elements from old telephone sets,, Also Altec branded ( this week owned by Plantronics )computer stuff CAN works great...( I have a headset for my K2.) http://www.alteclansing.com/product_details.asp?pID=AHS515 just needs to be wired properly providing the bias to the electret... there are articles all over the net,.,. I like especially the comment "We do not release technical specifications of our retail headsets."the spec would look too good now back to learning the K3 bill Joe-aa4nn wrote: Their statment should steer you clear away from considering the Plantronics Gamecon headset. de Joe, aa4nn SNIP "The .Audio 350 is a modern equivalent to the old GameCom 1; the two headsets have comparable specifications however neither of these products are radio headsets. We do not rate our analog PC headsets as compatible with radio consoles. We do not release technical specifications of our retail headsets." ___ ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] hard case for k2?
don's cautions are very valid. a trick i learned was to pack the set with the bottom facing up . This way i can use the tilt-stand as a handle to lower the set into the foam cutout. Likewise the tilt-stand becomes a handle to pull the set out of the foam. Better than trying to dig into the foam which will wreak it . Those VW solar panels, while only 4 watts or so will even fit into the lid space. I've cut little "drop-in holes for the palm paddle set and the gamma power supply. bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] SWR Measurement with KAT3
i DO notice a difference ...between the k3 info and the swr/wattmeter on it's output. I believe it is due to the tuner components still in the line when bypass is selected. AM I CORRECT ??? bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 assembly photos
here is my 'contribution' to the assembly photos it is an epson site no cost , no signup , just view http://albums.photo.epson.com/j/ViewPhoto?u=1771119&a=32611738&p=75992458 or you can go tophoto.epson.comand VISIT by putting in my email address which is above in the VISIT ALBUMS box. same result bill k3 #44 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 - too many firmware updates?
up on the top of the updater there is a screen under " help" firmware release notes , with a historyof what changes hope this help bill At 10:26 AM 11/23/2007, Dave G4AON wrote: My updater has collected MCU firmware versions 1.34, 1.35, 1.36, 1.38, 1.39, 1.41 and 1.42 and I've only been using it since late Monday of this week! Hope you guys keep track of the changes, I can hardly keep up. Can we have proper change notification so we can decide which updates to take (or not) as the case may be? 73 Dave, G4AON K3/100 #80 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] ESD recommendation
I have had that esd wrist strap and mat for years and the K3 was an obvious place to start using them... bill At 07:51 AM 11/23/2007, Julian G4ILO wrote: On Nov 23, 2007 12:48 PM, Dave G4AON <[EMAIL PROTECTED]> wrote: > You must use anti-static precautions. It's foolish to assemble a $2500 > radio only to damage it for the sake of perhaps $25 worth of anti-static > products. Even I, notorious tightwad that I am, have forked out on an anti-static mat and wrist strap. I've never used one in the past. But I figured that if I zap something on a K3 board, which is not user repairable (at least, not by me) it would be a much bigger deal than if I zapped a discrete component when building my K2. -- Julian, G4ILO K2 s/n: 392 K3 s/n: ??? G4ILO's Shack: www.g4ilo.com Zerobeat Ham Forums: www.zerobeat.net/smf ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Choosing headset
for a little more than 100$ I was able to get a sennheiser boom headset, ( sllightly used) ... HMD 280 ( the d is for dynamic mic)... work great on the k3 ( and my icom)... At 02:15 AM 11/26/2007, Simon Brown (HB9DRV) wrote: I use good Sennheiser headphones - I like to listen to the audio from the radio without additional signal modifications. You ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] OT - American hamming in UK
both the Watson..PS. and Dealer-Importer R&L's brand Jetstream PS obviously come from the same offshore vendor. I was thinking about the Watson small unit with a pile of supercaps sort of a "super Gamma". bill At 12:03 PM 11/30/2007, you wrote: I don't know if its a rebrand - I believe Watson is actually the manufacturing arm of WATers and StantON - but I guess they don't actually manufacture, just design/spec etc. And I have not put a scope on this, I just didn't notice any RFI while using it. O ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] [K3] anyone a K3 to K3 qso on 20 ??? 40 ??
anyone a K3 to K3 qso on 20 ??? 40 ?? bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Fwd: Re: [Elecraft] Neat K3 Video! ....now agc
Guess there is an advantage to having an amp (like the ACOM 2000a) that upon a fault condition like a bad coax,,,high swr shuts itself into a "fault" standby modesuch as happened when i was feeding a bad 80 meter feed line. This rather than relying on an exterior component ( on an ALC feedback line), or my LP-100 SWR meter keying loop. The ACOM has both an ALC and a qsk loop thru, as does the TT Herc II neither of which is connected. Nor has the lack of connecting them with my Icom , or K2 (now a K3) caused an issue. Everyones results WILL vary. As will their preferences... I would imagine that after mentioning what you perceive missing or what you believe could be done better two or three times , starts to appear like lobbying rather than offering your opinions. We know from eric and wayne's previous work that they see and hear all our ideas...and put them on THE LIST. After the smoke clears and they are past the obvious things that need to be done, such as the second rcvr , am, fm etc ...then we should crank up the want list. I will send this email to myself tonight, and maybe never send it out. If I get feeling like I want to respond to a " you gotta change this now " I'll send this out. Oops Must have sent it out for you to see it bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 vs K2 vs K1/kx1
Now THAT subject line will hit all the mailboxes/folders With all the great stuff flowing along, it certainly makes it easier if we keep the model in the subject line just a request from the midlands, where it's 21F, the ground is frozen and I worked my first K3 yesterday. thanks bill k3#44 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Separate list for K3
At 12:53 PM 12/4/2007, B. Scott Andersen wrote: I am wondering if it might be appropriate to consider splitting the Elecraft list into two lists: one for the K3 and one for all other Hi Scott, I have my email set up so the K3 stuff has it's own folder... and goes right in... Actually stuff with subjects : :" K1 ,Kx1, dstar, orion all go into the trash...so I can also still watch my icom and tentec lists. You might see how to configure your email client to do this , which would allow you to load the stuff down at one time... and view the k3 stuff at YOUR convenience. Besides the elecraft guys have said they want to keep the family in one spot... a few times, following similar suggestions. bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] Re: K3 shipping
Regarding the overflow of messages on things we cannot change, there are some we can. could we put in the subject line K3 SHIPPING as in radio = K3 interest = shipping , or for that matter lack of shipping. that way those of us who has set our email clients to deal with sorting subject matters and models can thank you, (and yes, I did get mine,,,) bill ny9h ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] On a more technical note.....
the new 10 watt lpa Not that I plan on taking the bottom off frequently, It's ALOT BETTER AND EASIER THAN THE K2 ..and as I did it could only think of the k2's lpa procedure, bill #44 While we're talking disassembly, let me point out that Wayne specifically avoided needing thermal pads or complicated hardware stacks anywhere on the K3 bottom cover assembly even though the rear section is the heat sink for the 10-watt low power amplifier (LPA) module. Pulling the bottom covers is simply a matter of removing screws and lifting the covers off. Reinstalling the covers involves setting them in place and putting all the screws back ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] k3 On a more technical note.....
the new 10 watt lpa Not that I plan on taking the bottom off frequently, It's ALOT BETTER AND EASIER THAN THE K2 ..and as I did it could only think of the k2's lpa procedure, bill #44 While we're talking disassembly, let me point out that Wayne specifically avoided needing thermal pads or complicated hardware stacks anywhere on the K3 bottom cover assembly even though the rear section is the heat sink for the 10-watt low power amplifier (LPA) module. Pulling the bottom covers is simply a matter of removing screws and lifting the covers off. Reinstalling the covers involves setting them in place and putting all the screws back ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] Mics for the K3
how about a computer network jack wired to a foster type plug bill At 08:51 PM 12/17/2007, Joe Subich, W4TV wrote: Don, > That's easy, just open the mic plug and re-wire it for the K3 > pinout - or if you want to continue using it with Yaesu equipment, > build a Yaesu to Elecraft adapter. The FT-897D has a modular (RJ-45) mic jack. This will require obtaining the cable for a Yaesu FT-1000MP (Foster/8) and then modifying the Foster cable. 73, ... Joe, W4TV > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Don Wilhelm > Sent: Monday, December 17, 2007 9:38 PM > To: THOMAS BRERETON > Cc: Elecraft Reflector > Subject: Re: [Elecraft] Mics for the K3 > > > Tom, > > That's easy, just open the mic plug and re-wire it for the K3 > pinout - > or if you want to continue using it with Yaesu equipment, > build a Yaesu > to Elecraft adapter. > > 73, > Don W3FPR > > THOMAS BRERETON wrote: > > I've been reading the mail about mics for the K3. I am > using a Yaesu MD-100 for my FT-897D (which I will be selling > upon the arrival of my K3). It's a very nice desk-top, > simple mic with 8 pin configuration which of course does not > match the K3 pin outs. > > Is there anyone who can suggest how I can use this mic with the K3? > > Tom, W0TOM > > > > ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Which Heil Prosets should we carry?
too bad the computer industry doesn't have any nice desk microphones as it does have some GREAT headsets. like from "altec" "koss" or logitek ..comfy...with a boom electret,I noticed a "telex" brand baby shotgun desk mic , that would work but needs a ptt switch... How about a tiny interface box that simply accepts the two plugs from the typical computer headset, with a ptt switch on it...and maybe even four buttons to fire off the memories in the K3 ( by then I hope Wayne has a way to plug such a remote memory switch into the radio) I course I do realize that all K3 owners could construct such an appliance easily. ( I did this for my K2 portable setup, even had a radioshack memory sound chip in the hand held controller) ...to keep saying cqcqcq qrp ny9h ) bill bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Contrast and compare...
The DZ transceiver was at Dayton two years ago. Had a booth back by the GM exhibit. As I recall their manual was an exact look a like of the old Heathkit manual. The set was a busy looking set, but with a pile of "feature/benefits" including I believe a second receiver option. Interesting the PA board picture does have a copywrite date of 2007. Glad to see they are still aliveand as Lyle says we have another American effort in the HF biz. They did have spec sheets two years ago... Let's all wish them success I already have my compliment of K2s ,a K3 and a big Icom .. I am DONE SHOPPING. bill At 09:17 PM 12/29/2007, Lyle Johnson wrote: I had a chance to see a DZ kit Sienna at Pacificon in October. It was powered up and operating -- and it is a kit! I can't comment on performance or design, as I neither operated it nor examined its specifications. I am encouraged to see that there is sufficient belief in the future of Amateur radio that American companies (as well as Asian and European) are investing in product development. 2007 was a banner year for new Amateur radio transceiver introductions. These products all take many person-years to develop. In the end, we all win. 73, Lyle KK7P ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 firmware upgrade 1.55
ed is correct check the schematic you'll see that there are components still in line when in bypass. bill At 10:23 AM 12/30/2007, Ed K1EP wrote: If I recall, according the Aptos, there is capacitance/inductance left in when it says Bypass to match the impedance of the bypassing ATU circuitry. At 12/30/2007 10:53 AM, David Ferrington, M0XDF wrote: Yes, as far as I know On 30/12/07 15:43, "David Andrews" <[EMAIL PROTECTED]> sent: > Advice please - the ATU BYPASS feature - is it a real bypass leaving no > stray capacitance or inductance in the path (unlike the K2)? -- Everything secret degenerates, even the administration of justice; nothing is safe that does not show how it can bear discussion and publicity. -Lord Acton, historian (1834-1902) ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] Mic for K3 & Ducie
when i wired both my k2 for Icom mics everything was working fine till. I used the icom sm-8 .It also grabs dc from the up/down circuit to power the mic, rather than using the dc bias on the audio line. Had no audio and it took me a while to figure it all out.. and my k3 ( in my station) feeds THRU THE BACK CONNECTORS.. I have 2 GREAT shure 414b mini hand mics... 1 wired K3 one for the IC wired K2s. 8 band modes so far for VP6DX..( K3s).. still looking for 40 & 80.. bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] electronic product standards
holy cow,,, a $1.59 electret mic element from radio shack works GREAT with all my icoms and my K2s and K3. And where do the kenwood & Icom and Yaesu Mics ( & bob's ) come from from companies that actually make microphones like Primo, panasonic & Foster in JA land. In EU Sennheiser...& AKGetc.just look in mouser & digikey. Ham radio is too small a market to make mic elementsHam companies can assemble them; "design" them , and MARKET THEM TO HAMS YES... Even Elecraft acknowledges this reality. they get them made, the way they want...and are entitled to mark them up so they can "design" & advertise, maintain inventory and MAKE HAMS HAPPY who want a matching...esthetically pleasing solution. O Yes THEY HAVE THE MATCHING CONNECTOR... which is called a "foster" connector ( the mic company that supplies all those mics). back to cw K3 ASSEMBLY PIX @ http://picasaweb.google.com/Bill.SteffeySr/K3 NY9H STATION PIX @ http://albums.photo.epson.com/j/ViewPhoto?u=1771119&a=13683578&p=75658236&f=0 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] D-104 and Radio Shack electret element
you might be able to place an electret element in the case and leave the original element in there You'd have to rewire since the astatic has a 3 conductor plug on the mic housing. I have placed an electret ( small ) in front of a dynamic AKG element in my current station microphone, and cannot hear any acoustic interference. bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Re: VP6DX RTTY QSOs on the K3 -- without a computer
you can just put you call into the memory space with the IM... then hitting it several times, as many as you need for repeat ( chaining ) ... the display even tells you it's " chaining" the memory hits together; then take over with the paddle... got ducie rtty today ... on 20 ... I discovered it dropped the "im" on cw ... by experimenting in the test mode...guess i could have read it somewhere. still learniing... com'on ballistic vfo control bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 Tops the List
how about a youtube video recording..! that might be one of the first GOOD uses of youtube... bill At 12:28 AM 2/19/2008, David Cutter wrote: It would be good for the wider amateur community if someone could make a recording of that. David G3UNA Good news indeed about the K3 being at the head of the performance list - Congrats to the Elecraft folks! Thought I would mention that Rob Sherwood will be giving a talk tomorrow (Tuesday) nite at the Boulder Amateur Radio Club. The subject is Measuring Receiver Performance and DSP. I don't know how much, if any, of his time will be spent raving about the K3 he measured, but I for one will be there to find out. If you are in NE Colorado, you might want to consider attending. 7 PM. For info go to www.qsl.net/W0DK. 73 ... Craig AC0DS ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3 antenna jacks
I'm going to change out to BNC also they are good to at least 4x the K3 output power... and well past UHF and small & quick bayonet !!! (just like the other bncs on the back of my K3.) bill However, I've used BNC's on mine. Oak Hills Research sells a 2-pack with beautiful adapter plates for $7.50. His part number is OP-SB2. 73! Ken Kopp - K0PP ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Split DX
Brett, talking about operating split. let me recommend a great little book... by an ex neighbor, a fellow Elecraft owner, and THE guy who "wrote the book" on DXing. The Complete DXer by Bob Locher...w9kni http://www.eham.net/reviews/detail/3363 http://www.idiompress.com/books-complete-dxer.html IF you wish to become proficient at DXing this is the fastest education you can get. bill At 12:28 PM 2/22/2008, you wrote: I've not ever really worked a split DX station ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] software to load K3 memories,
did I miss something ... is there a 3rd party software to load the memories of the k3 I looked at HRD but didn't find that facility. bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
[Elecraft] software to load K3 memories, clarified question
did I miss something ... is there a 3rd party software to load the memories of the k3 Not just the keyer memories but the frequencies with all the parameters. bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K3-Latest K3 Review on EHAM
as far as "audio crunch" I agree the current iteration is not as penetrating as a good RF clipper could give it albeit it IS distortion but deem favorable by many. KEY WORK : CURRENT. Hard to believe that solardx contributes to Eham , yet is not on the reflector. Perhaps by another moniker ?? Perhaps someone should find him and invite him aboard. bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] [K3] Noise Reduction
the BHI product is sold in the states by GAP it does work better( my opinion) than the "clearspeech" product. Hope I'll be able to determine someday that the K3 is/will be as effective haven't been able to compare the two. YET. bill At 12:20 PM 2/25/2008, David Cutter wrote: Here's another system: http://radio.bhinstrumentation.co.uk/html/sound_file_demonstration.html David G3U ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] ICOM ProIII price reductions // "The K3 Effect"
ProIII's can now be had for as little as $2384.10. I guess we could call it "The K3 Effect"? As always, it's interesting watching the market reactions to new gear. I would think that the reduction of the P3 is rather traditional marketing. As a product ages...and/OR nears it's end of life, a manufacturer brings the product to a wider audience ... one that can spend less...first get the big spenders, then bring the price down to the "masses" .. it is a ton of radio for $2300.( enjoyed mine) We did that with the TASCAM "portastudio" 20 years ago. First you use some coupons, then just reduce the price...sell boxes ,sell sell bill K3 ASSEMBLY PIX @ http://picasaweb.google.com/Bill.SteffeySr/K3 NY9H STATION PIX @ http://albums.photo.epson.com/j/ViewPhoto?u=1771119&a=13683578&p=75658236&f=0 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Ducie Island - ARRL News Letter Excerpt
They said "The outstanding receiver and transmitter characteristics allowed us to run two positions simultaneously on any band -- even the very narrow 30 meter band -- with absolutely no interference. Good design makes the complex appear simple: the ins and outs of this sophisticated radio were quickly mastered by the operator team, none of whom had seen a K3 before the expedition." I think an important item to remember from the Ducie site: ""..7 stations on Ducie Island. Most (if not all) will have a KW amplifier."" Same bandrunning a KW ! that adds a bit of DBs to the island. bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Price Increases...and advertisements
At 02:37 PM 3/3/2008, [EMAIL PROTECTED] wrote: ..for the 100-W assembled model (K3/100), the rig is comparable in both features and performance to transceivers listing at up to six times its price." WITH THE WEAK DOLLAR, I'll bet ICOM would love to catch up by increasing the the 7800 10%..-15%. still not keeping up with the dollar drop 10.600 X 1.15 = 12190.. ok maybe still not 6 times the price guess that makes MY K3 worth more... bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] hoisting linef ORDERING SITE ADDRESS
something sort of strange just happened when i ordered some of this line... the site recognized me as a previous customer and WANTED TO SHIP THE ORDER TO THE PREVIOUS CUSTOMER... not too certain just what i did wrong , or what happened... I checked with site, .. he's checking it also,.,, after looking at what I clicked...i just picked up the first part of the link and thus entered the site as a current account holderfrom longmont co. oops... CAREFUL WHAT YOU CLICK and what you get BILL At 08:56 AM 11/1/2006, Richard haendel wrote: I've come across some braided Dacron line for raising wire antennas at a very good price. It's really kite line. Kitebuilders.com has 1640 ft roll of 200 pound test for only $25.00. that's less than .02 per foot, not bad !!. A bought a roll, this much line will probably last me forever. It comes in several colors, but the blue line I bought, the color fades and the color comes off in my hands after being outside for a year. However, I can step on a loop of it and it holds me up !! Good for portable use as the line is very light. URL is http://www.kitebuilder.com/catalog/index.php?cPath=30_192&osCsid=fd8d2f06f7b 4ec72ea3135a6e2075f23 73 Rich W3ACO ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Switch box for key/paddles?
you might think about grabbing one of these AV switchers / videogame selectors that switch video plus left & right audio... some have rotary switches, some have pushbuttons...switching up to 5 different devices, I've bought some very "inexpensively",,,usually at fleamarkets/hamfests for 5$,,, try ebay for "video game selector"...for 10-12$ shipped,,, just hope they don't short any of the terminals when not in use like an antenna switch might, I have used similiar switches to switch between linears... even with the key in , key out switching on some xcvrs/ampscombos. happy new year bill At 07:05 PM 12/28/2006, Mike Markowski wrote: I'd like to have a switch box to switch a key between multiple rigs. Does such a thing already exist? It's a simple project but many times prefab comes cheaper. My ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] K2 Mic as an ICOM mic
At 09:46 PM 1/2/2007, [EMAIL PROTECTED] wrote: I .. I have two extra Icom mics. Will they work i wired both of my K2s as icoms... if you put mic pin 8 to the speaker output line, you can even use their headsets Most of their mics are electret condenser mics, an electret is an electret is an electret properly "baffled" and interfaced correctly, MOST humans couldn't tell the difference between them especially for communications use, Those things are flat beyond voice freqsand small also,.,, found free inside one of those broken $12.95 telephones you've been saving in the basement. bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Quality Ham Headphones? WITH A BOOM MIC
Keep in mind, Labtec also sells boom mic headsets which takes care of another requirement a microphone. They are sold as computer headsets , but have a nice electret element , just perfect for the K2 or icom radios. Some of the headsets even have the nice leatherlike ear cushions... Altec ( Sparkomatic , the cars stereo people bought the Altec name for consumer products) sold a bunch of nice headsets... which appear to be discontinued and sold off to some closeout houses... http://www.costcentral.com/product-list/Headsets_Microphones/170/Altec_Lansing_Technologies/Z00396/ if you handy with a soldering iron , make a box to interface the headset mic plugs to go into a 8 pin foster plug. That way any of the computer headsets will be pluggable. The headphones will plug right injust the mic plug needs to be adapted/interfaced If it is an electret mic element ( and they usually are ) the level will be fine!. My computer headset fits into my K@ pelican case for "vacations." bill ny9h ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] Quality Ham Headphones?
keep in mind if you want to run split, with a second receiver, ( or orion or such) no need to be rewired to give you the Left & Right and when mono, just plug them in... bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
RE: [Elecraft] D-104 Mic freq reesponse
At 04:03 PM 2/23/2007, Ron D'Eau Claire wrote: Unlike almost all modern mics, the original D-104 has a shaped frequency response curve for optimum speech quality. It has a broad peak in the 3 kHz not unlike all modern mics, the Shure SM58... is probably the world's most popular mic model... which has/had been the standard of the rocknroll industry since Heil was a pup. """The SM58 has a tailored vocal response for a sound which is a world standard. Rugged construction, a proven shock mount system, aspeech - the SM58 is the overwhelming choice of professionals. The legendary Shure vocal mic is tuned to accentuate the warmth and clarity of lead and back-up vocals. Consistently the first choice of performers around the globe... ;;it's up 5 db at 4khz... bill ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com
Re: [Elecraft] Spilling the HF beans ..... NEW STUFF
what fun would it be to go to DAYTON and the QRP FDIM "four days in May" conference and NOT see the latest new stuff from Elecraft. opportunities such as Dayton ALWAYS have held the initial introduction of BIG NEW PRODUCTS. companies strive to "get er done" to show at Dayton, whether it be ICOM, or Elecraft... one of the reasons we make the trek... right bill ny9h ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/subscribers.htm Elecraft web page: http://www.elecraft.com