Re: [TeX-Music] TeX, Latex and iMac
> > Graham Norton wrote > > > >> A. The good news is that TexMozartp3.tex (see attached) did compile > >> and generate the same output as in the manual (except for the bar > >> numbers). > >> For this to work, the input file and the directory musixtex MUST be > >> at the same level in the parent directory. This is crucial. > > > > Not on my PC. TeXMozartp3.tex goes through just fine, straight out of > > the box, without any musixtex directory at the same level as the > > source. I believe all that is required is to have a properly set up > > installation of TeX and MusiXTeX, with a path variable set to allow > > execution of all the necessary binaries, and with musixtex.tex and all > > the musixtex fonts in folders that TeX can find. In MiKTeX, the latter > > is accomplished by placing the files in the designated user input > > folder or a subfolders of that, and then "refreshing the filename > > database." > > > > > I tried putting TexMozartp3.tex in Downloads, a complely different > directory which does not contain any musixtex software. (I moved all my > WIMA downloads elsewhere in a directory Documents/music). > > Then I double-clicked on it to bring up Texshop (downloaded from CTAN) > and it compiled correctly in Tex . Perhaps it was just the initial run > that needed them in the same position. No need to modify any path > names or a database. TeXshop should have something called a "Local Guide" (because LaTeX recommends that all distributions have a document called that) which should explain where to put custom packages like musixtex and how to refresh the FNDB (texhash is probably the command you're looking for). > >> C. I note that doc/musixdoc.tex (which I cannot latex) > > > > When I first tried to latex it (not tex; it's a LaTeX file), latex > > complained that it couldn't find backgrnd.sty. So I grabbed that file > > from the musixtex.zip and put it in my user tex input folder, > > refreshed the filename database, and the file compiles just fine. > > No complaints about not being able to find backgrnd.sty ; it stops > with > > !no room for a new count (this message means TeX has run out of a particular kind of memory) It sounds like your TeX distro is possibly not using e-TeX - very near the top of the file, is there the line "entering extended mode". The first three lines of the log should be roughly: This is [pdf]TeX, Version 3.1415926[-1.40.9] ("the name of your distribution") **musixdoc entering extended mode Either that or it's possible that you're using a newer version of LaTeX which has used slightly more memory and so pushed the documentation over the limit. > l 400 \newcount\nofMPsegements > > Unfortunately the log file is different and I cannot past the console > errors. > > > > > >> D. Including > >> > >> \documentclass{article} > >> \usepackage{musixtex} > >> > >> > >> > >> \end{document} > >> > >> around the example was a good suggestion. For this to work, my input > >> Mozartp3.tex and the directory musixtex have to be in the same parent > >> directory (i.e. at the same level). > >> > >> Unfortunately it still won't complete, complaining: > >> > >> !I can't find 'Mozartp3.aux,' > >> \enddocument Your sample is missing \begin{document} after \usepackage{musixtex}. All LaTeX files get a .aux file on pass one, even though it may be empty. David ___ tex-mu...@icking-music-archive.org mailing list If you want to unsubscribe or look at the archives, go to http://mailman.nfit.au.dk/mailman/listinfo/icking-music-archive.org-tex-music
Re: [TeX-Music] Hi all
On Mon, 13 Jul 2009, Marcello Anselmi Tamburini wrote: Ok, u'r wonderful. Now the long stem is gone, but now, in the extract you modified, there is a stem linking notes before isn't. I imagine you've modified the r.h. only like this: \input musixtex \instrumentnumber{1} \setstaffs1{2} \setclef{1}{\bass} \startextract \stemlength0% \Notes\zw{CG}\zq{JNQ}\nextstaff\roff{\zq{dg}}\zq{egi}\qu k\en \endextract \end Then you've left 'floating' \zq's at the l.h. and MusiXTeX attemps to link them to something. Also adapt the l.h. chord like the r.h. one. I can't reproduce the problem with Don's \nq method. If my guess is wrong please provide a very short TeX example that has the problem. Ciao, Jean-Pierre Coulon cou...@obs-nice.fr ___ tex-mu...@icking-music-archive.org mailing list If you want to unsubscribe or look at the archives, go to http://mailman.nfit.au.dk/mailman/listinfo/icking-music-archive.org-tex-music
Re: [TeX-Music] TeX, Latex and iMac
Dear Don, Thanks for your reply. On 13/07/2009, at 1:47 PM, Don Simons wrote: Graham Norton wrote A. The good news is that TexMozartp3.tex (see attached) did compile and generate the same output as in the manual (except for the bar numbers). For this to work, the input file and the directory musixtex MUST be at the same level in the parent directory. This is crucial. Not on my PC. TeXMozartp3.tex goes through just fine, straight out of the box, without any musixtex directory at the same level as the source. I believe all that is required is to have a properly set up installation of TeX and MusiXTeX, with a path variable set to allow execution of all the necessary binaries, and with musixtex.tex and all the musixtex fonts in folders that TeX can find. In MiKTeX, the latter is accomplished by placing the files in the designated user input folder or a subfolders of that, and then "refreshing the filename database." I tried putting TexMozartp3.tex in Downloads, a complely different directory which does not contain any musixtex software. (I moved all my WIMA downloads elsewhere in a directory Documents/music). Then I double-clicked on it to bring up Texshop (downloaded from CTAN) and it compiled correctly in Tex . Perhaps it was just the initial run that needed them in the same position. No need to modify any path names or a database. C. I note that doc/musixdoc.tex (which I cannot latex) When I first tried to latex it (not tex; it's a LaTeX file), latex complained that it couldn't find backgrnd.sty. So I grabbed that file from the musixtex.zip and put it in my user tex input folder, refreshed the filename database, and the file compiles just fine. No complaints about not being able to find backgrnd.sty ; it stops with !no room for a new count l 400 \newcount\nofMPsegements Unfortunately the log file is different and I cannot past the console errors. differs from the pdf file of the manual currently available from WIMA. I'd like to suggest that the pdf version of musixdoc.tex be put on WIMA, replacing the current one. There are two versions of the manual on WIMA. I believe that the directly linked copy of version T.113, at http://www.icking-music-archive.org/software/musixtex/musixdoc.pdf is the same as the one from musixdoc.tex in the musixtex.zip. If there are any differences, please let me know exactly where they are. I have not compared them in detail, but Chapter {Examples} in musixdoc.tex is quite different from \Chapter{MusixTex examples} of the pdf of T114 that I downloaded. The other one that is directly linked is version T.114, at http://www.icking-music-archive.org/software/musixtex/mxdoc110d.pdf This is an extensively edited version. I am not going to remove it, because I spent a long time creating it, and I believe it's a substantial improvement over to older version. Some day I or some other volunteer may create a new musixtex.zip; and when and if that happens, the most recent version of the manual will be included. On line 8048 of musixdoc.tex, we read: " When producing this examples, care should be taken about the fact that several given files are supposed to be included (by means of \keyindex{input}) in other files. Thus the only good files to be directly \TeX-ed are those which begin with \verb|\input musixtex| or \verb|% \input musixtex|. This latter command is often commented out so that the examples can be run either using a \musixtex\ format including {\tt musixcpt.tex} and {\tt musixsty.tex} --- namely the format generated by {\tt musixtex.ins} --- or using a \musictex\ format including {\tt musictrp.tex}, {\tt musicvbm.tex} and {\tt musicsty.tex} --- namely the format generated by {\tt musixtex.ins}." It would be very useful if this statement (or a shortened version of it) were included as a footnote before the first examples in the manual . And 'begin{music}' \'end \{music} ' should be removed from the example! ... it is a bit confusing here for the reader, as Tex is mentioned repeatedly as the preferred engine, and in Chapter 2, opening paragraph, we are reminded that \input musixtex must be included, again suggesting Tex. Where to begin? I removed this comment from version T.114 of the manual. It contains lots of references to obsolete components of the MusiXTeX system. The corresponding text in T.114 is "The file musixdoc.tex, the source for this manual, contains many useful examples. In the PDF, many examples are accompanied by a display of the code that produced them, while for a few only an image of the extract is included in the PDF and you'll have to look in musixdoc.tex to see the coding." I admit that I didn't go into the complex distinctions between TeX and LaTeX at this point. But the idea is that in most cases, one can copy the source from the PDF, surround it with the necessary boilerplate including setting up the page size,
Re: [TeX-Music] TeX, Latex and iMac
Graham Norton wrote >A. The good news is that TexMozartp3.tex (see attached) did compile and >generate the same output as in the manual (except for the bar numbers). >For this to work, the input file and the directory musixtex MUST be at >the same level in the parent directory. This is crucial. Not on my PC. TeXMozartp3.tex goes through just fine, straight out of the box, without any musixtex directory at the same level as the source. I believe all that is required is to have a properly set up installation of TeX and MusiXTeX, with a path variable set to allow execution of all the necessary binaries, and with musixtex.tex and all the musixtex fonts in folders that TeX can find. In MiKTeX, the latter is accomplished by placing the files in the designated user input folder or a subfolders of that, and then "refreshing the filename database." >C. I note that doc/musixdoc.tex (which I cannot latex) When I first tried to latex it (not tex; it's a LaTeX file), latex complained that it couldn't find backgrnd.sty. So I grabbed that file from the musixtex.zip and put it in my user tex input folder, refreshed the filename database, and the file compiles just fine. >differs from the >pdf file of the manual currently available from WIMA. I'd like to >suggest that the pdf version of musixdoc.tex be put on WIMA, replacing >the current one. There are two versions of the manual on WIMA. I believe that the directly linked copy of version T.113, at http://www.icking-music-archive.org/software/musixtex/musixdoc.pdf is the same as the one from musixdoc.tex in the musixtex.zip. If there are any differences, please let me know exactly where they are. The other one that is directly linked is version T.114, at http://www.icking-music-archive.org/software/musixtex/mxdoc110d.pdf This is an extensively edited version. I am not going to remove it, because I spent a long time creating it, and I believe it's a substantial improvement over to older version. Some day I or some other volunteer may create a new musixtex.zip; and when and if that happens, the most recent version of the manual will be included. > >On line 8048 of musixdoc.tex, we read: > >" When producing this examples, care should be taken about the fact that >several given files are supposed to be included (by means of >\keyindex{input}) in other files. Thus the only good files to be >directly \TeX-ed are those which begin with \verb|\input musixtex| or > \verb|% \input musixtex|. This latter command is often commented out >so that the examples can be run either using a \musixtex\ format >including {\tt musixcpt.tex} and {\tt musixsty.tex} --- namely the >format generated by {\tt musixtex.ins} --- or using a \musictex\ format >including {\tt musictrp.tex}, {\tt musicvbm.tex} and {\tt musicsty.tex} >--- namely the format generated by {\tt musixtex.ins}." > > >It would be very useful if this statement (or a shortened version of >it) were included as a footnote before the first examples in the manual >. And 'begin{music}' \'end \{music} ' should be removed from the >example! ... it is a bit confusing here for the reader, as Tex is >mentioned repeatedly as the preferred engine, and in Chapter 2, opening >paragraph, we are reminded that \input musixtex must be included, again >suggesting Tex. > Where to begin? I removed this comment from version T.114 of the manual. It contains lots of references to obsolete components of the MusiXTeX system. The corresponding text in T.114 is "The file musixdoc.tex, the source for this manual, contains many useful examples. In the PDF, many examples are accompanied by a display of the code that produced them, while for a few only an image of the extract is included in the PDF and you'll have to look in musixdoc.tex to see the coding." I admit that I didn't go into the complex distinctions between TeX and LaTeX at this point. But the idea is that in most cases, one can copy the source from the PDF, surround it with the necessary boilerplate including setting up the page size, \input musixtex, \startmuflex\startpiece, etc., and then TeX it. If I ever revise the manual again, perhaps I'll include a section explaining exactly how to do this. >D. Including > >\documentclass{article} >\usepackage{musixtex} > > > >\end{document} > >around the example was a good suggestion. For this to work, my input >Mozartp3.tex and the directory musixtex have to be in the same parent >directory (i.e. at the same level). > >Unfortunately it still won't complete, complaining: > >!I can't find 'Mozartp3.aux,' >\enddocument > >and hangs on >l. 17 \end{document} > >with no pdf file generated. Definite progress, but this is strange as >there are no e.g section references to generate such a file(??) > >Seems to be a Latex problem. Oddly enough, Tex does not complain about >a missing .aux file, and does not generate one from e.g. >adagio.tex. I can't test these assertions since you didn't include Mozartp3.tex. As I said above, I had no problem LaTeX'i
[TeX-Music] TeX, Latex and iMac
Dear All, Thanks for your replies and hints. Sincere apologies for the length of this reply. A. The good news is that TexMozartp3.tex (see attached) did compile and generate the same output as in the manual (except for the bar numbers). For this to work, the input file and the directory musixtex MUST be at the same level in the parent directory. This is crucial. B. I did mean page 3 of the printed manual, not page iii. The example is as follows: \begin{music} \parindent10mm \setname1{Piano} \setstaffs12 \generalmeter{\meterfrac44} \startextract \Notes\ibu0f0\qb0{cge}\tbu0\qb0g|\hl j\en \Notes\ibu0f0\qb0{cge}\tbu0\qb0g|\ql l\sk\ql n\en \bar \Notes\ibu0f0\qb0{dgf}|\qlp i\en \notes\tbu0\qb0g|\ibbl1j3\qb1j\tbl1\qb1k\en \Notes\ibu0f0\qb0{cge}\tbu0\qb0g|\hl j\en \endextract \end{music} which I can now cut from doc/musixdoc.tex. Thanks for this hint. C. I note that doc/musixdoc.tex (which I cannot latex) differs from the pdf file of the manual currently available from WIMA. I'd like to suggest that the pdf version of musixdoc.tex be put on WIMA, replacing the current one. On line 8048 of musixdoc.tex, we read: " When producing this examples, care should be taken about the fact that several given files are supposed to be included (by means of \keyindex{input}) in other files. Thus the only good files to be directly \TeX-ed are those which begin with \verb|\input musixtex| or \verb|% \input musixtex|. This latter command is often commented out so that the examples can be run either using a \musixtex\ format including {\tt musixcpt.tex} and {\tt musixsty.tex} --- namely the format generated by {\tt musixtex.ins} --- or using a \musictex\ format including {\tt musictrp.tex}, {\tt musicvbm.tex} and {\tt musicsty.tex} --- namely the format generated by {\tt musixtex.ins}." It would be very useful if this statement (or a shortened version of it) were included as a footnote before the first examples in the manual . And 'begin{music}' \'end \{music} ' should be removed from the example! ... it is a bit confusing here for the reader, as Tex is mentioned repeatedly as the preferred engine, and in Chapter 2, opening paragraph, we are reminded that \input musixtex must be included, again suggesting Tex. D. Including \documentclass{article} \usepackage{musixtex} \end{document} around the example was a good suggestion. For this to work, my input Mozartp3.tex and the directory musixtex have to be in the same parent directory (i.e. at the same level). Unfortunately it still won't complete, complaining: !I can't find 'Mozartp3.aux,' \enddocument and hangs on l. 17 \end{document} with no pdf file generated. Definite progress, but this is strange as there are no e.g section references to generate such a file(??) Seems to be a Latex problem. Oddly enough, Tex does not complain about a missing .aux file, and does not generate one from e.g. adagio.tex. Thanks again for your assistance. Graham Norton TexMozartp3.tex Description: Binary data TexMozartp3.pdf Description: Adobe PDF document ___ tex-mu...@icking-music-archive.org mailing list If you want to unsubscribe or look at the archives, go to http://mailman.nfit.au.dk/mailman/listinfo/icking-music-archive.org-tex-music
Re: [TeX-Music] Hi all
Ok, u'r wonderful. Now the long stem is gone, but now, in the extract you modified, there is a stem linking notes before isn't. - Original Message - From: "Jean-Pierre Coulon" To: "Werner Icking Music Archive" Sent: Sunday, July 12, 2009 8:54 AM Subject: Re: [TeX-Music] Hi all It seems the non-spacing chords at line 718 create a strange environent: \Notes\zw{CG}\zq{JNQ}\nextstaff\roff{\zq{dg}}\zq{egik}\en Say: \stemlength0% \Notes\zw{CG}\zq{JN}\qu Q\nextstaff\roff{\zq{dg}}\zq{egi}\qu k\en instead. Seems MusiXTeX is unhappy if an extract doesn't use any portion of stem at all. Don't ask me why! And I guess line 710 you mean 'insieme'. Cordiali saluti, Jean-Pierre Coulon cou...@obs-nice.fr ___ tex-mu...@icking-music-archive.org mailing list If you want to unsubscribe or look at the archives, go to http://mailman.nfit.au.dk/mailman/listinfo/icking-music-archive.org-tex-music ___ tex-mu...@icking-music-archive.org mailing list If you want to unsubscribe or look at the archives, go to http://mailman.nfit.au.dk/mailman/listinfo/icking-music-archive.org-tex-music
Re: [TeX-Music] Hi all: long stem
Are you all magic?! Marcello Anselmi Tamburini Mobile +39 333 8380805 Skype: marcello.tamburini Il giorno 12/lug/2009, alle ore 17.43, "Don Simons" > ha scritto: Excellent catch! Now that Jean-Pierre has identified the problem, I've confirmed that another solution would be to use \nq for the last note head at each position (it's like \zq but with a space like \qu or \ql) : == \begin{music} \instrumentnumber{1} \setstaffs1{2} \setclef{1}{\bass} \startextract \Notes\zw{CG}\zq{JN}\nq Q\nextstaff\roff{\zq{dg}}\zq{egi}\nq k\en \endextract \end{music} === BTW all those \nextstaff could be replaced with | --Don Simons -Original Message- From: icking-music-archive.org-tex-music-boun...@mailman.nfit.au.dk [mailto:icking-music-archive.org-tex-music- boun...@mailman.nfit.au.dk] On Behalf Of Jean-Pierre Coulon Sent: Saturday, July 11, 2009 11:54 PM To: Werner Icking Music Archive Subject: Re: [TeX-Music] Hi all It seems the non-spacing chords at line 718 create a strange environent: \Notes\zw{CG}\zq{JNQ}\nextstaff\roff{\zq{dg}}\zq{egik}\en Say: \stemlength0% \Notes\zw{CG}\zq{JN}\qu Q\nextstaff\roff{\zq{dg}}\zq{egi}\qu k\en instead. Seems MusiXTeX is unhappy if an extract doesn't use any portion of stem at all. Don't ask me why! And I guess line 710 you mean 'insieme'. Cordiali saluti, Jean-Pierre Coulon cou...@obs-nice.fr ___ tex-mu...@icking-music-archive.org mailing list If you want to unsubscribe or look at the archives, go to http://mailman.nfit.au.dk/mailman/listinfo/icking-music-archive.org-tex- music ___ tex-mu...@icking-music-archive.org mailing list If you want to unsubscribe or look at the archives, go to http://mailman.nfit.au.dk/mailman/listinfo/icking-music-archive.org-tex-music ___ tex-mu...@icking-music-archive.org mailing list If you want to unsubscribe or look at the archives, go to http://mailman.nfit.au.dk/mailman/listinfo/icking-music-archive.org-tex-music
Re: [TeX-Music] Hi all: long stem
Excellent catch! Now that Jean-Pierre has identified the problem, I've confirmed that another solution would be to use \nq for the last note head at each position (it's like \zq but with a space like \qu or \ql) : == \begin{music} \instrumentnumber{1} \setstaffs1{2} \setclef{1}{\bass} \startextract \Notes\zw{CG}\zq{JN}\nq Q\nextstaff\roff{\zq{dg}}\zq{egi}\nq k\en \endextract \end{music} === BTW all those \nextstaff could be replaced with | --Don Simons >-Original Message- >From: icking-music-archive.org-tex-music-boun...@mailman.nfit.au.dk >[mailto:icking-music-archive.org-tex-music-boun...@mailman.nfit.au.dk] >On Behalf Of Jean-Pierre Coulon >Sent: Saturday, July 11, 2009 11:54 PM >To: Werner Icking Music Archive >Subject: Re: [TeX-Music] Hi all > >It seems the non-spacing chords at line 718 create a strange environent: > >\Notes\zw{CG}\zq{JNQ}\nextstaff\roff{\zq{dg}}\zq{egik}\en > >Say: > >\stemlength0% >\Notes\zw{CG}\zq{JN}\qu Q\nextstaff\roff{\zq{dg}}\zq{egi}\qu k\en > >instead. Seems MusiXTeX is unhappy if an extract doesn't use any portion >of stem at all. Don't ask me why! > >And I guess line 710 you mean 'insieme'. > >Cordiali saluti, > >Jean-Pierre Coulon cou...@obs-nice.fr >___ >tex-mu...@icking-music-archive.org mailing list >If you want to unsubscribe or look at the archives, go to >http://mailman.nfit.au.dk/mailman/listinfo/icking-music-archive.org-tex- >music ___ tex-mu...@icking-music-archive.org mailing list If you want to unsubscribe or look at the archives, go to http://mailman.nfit.au.dk/mailman/listinfo/icking-music-archive.org-tex-music
Re: [TeX-Music] Hi all: long stem
> > Hello All, > > > > I can compile e.g. the example below, as well as adagio.tex and a number of > > other complex examples from WIMA, but cannot compile the simple example in > > section 1.2 of the Musixtex manual, v. T114 p. 3 (after adding \input > > musixtex at the beginning). I think that the actual problem is that the MusiXTeX manual is written in LaTeX, not Plain TeX. Note that \usepackage{musixtex} is different from \input musixtex because the former loads musixtex.sty (and so musixltx.tex) which sets up the {music} environment. The easiest fix for copying samples from musixdoc.tex is to use this template: \documentclass{article} \usepackage{musixtex} \begin{document} \begin{music} % copied sample \end{music} \end{document} and compile using *LaTeX*. If you really want to stick with Plain TeX then you must ignore the \begin{music} and \end{music} lines and use this general template: \input musixtex % copied sample without the \begin{music} and \end{music} \bye I'm confused however as you say that \setstaffs was causing an error and wonder if you were perhaps compiling with LaTeX originally but without a \documentclass call (or \usepackage) and so getting the wrong error message. > AFAIK p.3 is part of Table of Contents! Do you mean the Mozart excerpt > p.10? Can't you attach your sample file here? The Mozart excerpt *is* on "Page 3" (page 10 of the PDF). Page 3 of the PDF is "Page iii" (Preface to T.113') :o) HTH, David ___ tex-mu...@icking-music-archive.org mailing list If you want to unsubscribe or look at the archives, go to http://mailman.nfit.au.dk/mailman/listinfo/icking-music-archive.org-tex-music
Re: [TeX-Music] Hi all: long stem
On Sun, 12 Jul 2009, Graham Norton wrote: Hello All, I can compile e.g. the example below, as well as adagio.tex and a number of other complex examples from WIMA, but cannot compile the simple example in section 1.2 of the Musixtex manual, v. T114 p. 3 (after adding \input musixtex at the beginning). AFAIK p.3 is part of Table of Contents! Do you mean the Mozart excerpt p.10? Can't you attach your sample file here? PS Is a file of the examples of this manual available online (to avoid having to type each example in again when working through them)? AFAIK again, the LaTeX source of this manual is offered when you install the MusiXTeX distribution (thanks to Don). If you found MUSIXDOC.PDF you should also find MUSIXDOC.TEX and you should be able to copy-paste whatever example you like. Regards, Jean-Pierre Coulon cou...@obs-nice.fr ___ tex-mu...@icking-music-archive.org mailing list If you want to unsubscribe or look at the archives, go to http://mailman.nfit.au.dk/mailman/listinfo/icking-music-archive.org-tex-music
Re: [TeX-Music] Hi all: long stem
Hello All, I can compile e.g. the example below, as well as adagio.tex and a number of other complex examples from WIMA, but cannot compile the simple example in section 1.2 of the Musixtex manual, v. T114 p. 3 (after adding \input musixtex at the beginning). It won't recognize the \begin{music} command. If I comment this command out, it won't recognize the \setstaffs command. Seems like a very basic error and that something major is missing, although I downloaded all the recommended files. [I am trying to install the system on an iMac, Mac OS X v. 10.5.7 (the latest), compiling with Plain Tex in Texshop (v. 2.26, also the latest) and a rank beginner with musixtex.] Any help much appreciated. Thanks, Graham Norton. PS Is a file of the examples of this manual available online (to avoid having to type each example in again when working through them)? On 12/07/2009, at 5:12 PM, Jean-Pierre Coulon wrote: Hope Don won't find this TeX example too long! \input musixtex \instrumentnumber{1} \setstaffs1{2} \setclef{1}{\bass} \startextract \Notes\zw{CG}\zq{JNQ}\nextstaff\roff{\zq{dg}}\zq{egik} \en \Notes\qu J\en \endextract \end Jean-Pierre Coulon cou...@obs-nice.fr ___ tex-mu...@icking-music-archive.org mailing list If you want to unsubscribe or look at the archives, go to http://mailman.nfit.au.dk/mailman/listinfo/icking-music-archive.org-tex-music ___ tex-mu...@icking-music-archive.org mailing list If you want to unsubscribe or look at the archives, go to http://mailman.nfit.au.dk/mailman/listinfo/icking-music-archive.org-tex-music
Re: [TeX-Music] Hi all: long stem
Hope Don won't find this TeX example too long! \input musixtex \instrumentnumber{1} \setstaffs1{2} \setclef{1}{\bass} \startextract \Notes\zw{CG}\zq{JNQ}\nextstaff\roff{\zq{dg}}\zq{egik}\en \Notes\qu J\en \endextract \end Jean-Pierre Coulon cou...@obs-nice.fr ___ tex-mu...@icking-music-archive.org mailing list If you want to unsubscribe or look at the archives, go to http://mailman.nfit.au.dk/mailman/listinfo/icking-music-archive.org-tex-music