Hi all,
I've got a fairly simple single computer setup, it backs up about
7.5GB of data to a DDS-3 tape on the first Sunday of each month. For
the rest of the month it does nothing but incrementals (plus full
backup of the catalog) every night, amounting to less than 2GB a
month. That leaves 2.5GB
Hello all,
I was wondering what Pool you should you specify in a Job Restore when
you have more than one. For example, I have two Pools, one for Full
backups and for Incremental.
Pool {
Name = Full-Pool
Pool Type = Backup
AutoPrune = yes
Volume Retention = 6 months
Recycle = yes
Accept
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:bacula-users-
> [EMAIL PROTECTED] On Behalf Of Kern Sibbald
> Sent: Friday, November 25, 2005 2:58 PM
> To: bacula-users@lists.sourceforge.net
> Subject: [Bacula-users] Fwd: Feature Request
>
> Hello,
>
> I am forwarding this to the
Hello,
This is an interesting idea. Unfortunately, it is impossible to make
self-contained tapes unless you abort the last job that is writing on the
tape when the tape files since 99.999% of the time when a tape fills there
will always be more to write before the job ends.
If that is what you
On Monday 28 November 2005 17:01, David Boyes wrote:
> > What I have implemented already is (passes regression
> > testing, so all existing features work despite the new code):
> > - Separation of read/write descriptors in the Storage daemon.
> > - Separation of the read/write Storage names in the
Hi,
My tapes usually last 14-21 days with full backups every sunday and
incremental othervise.
I just let the system keep using the tape until it is full. But when it
fills, I would like if I could get bacula to abandon the current jobs
and start over with a full backup as the first thing on the
On Monday 28 November 2005 23:42, Arno Lehmann wrote:
> Hello,
>
> just to let you know...
>
> On 28.11.2005 17:27, Kern Sibbald wrote:
>
> ...
>
> > For Arno, I have created a new script that is similar to the setup that
> > is failing for him as he describes it, and now it is time for him to run
Hello,
just to let you know...
On 28.11.2005 17:27, Kern Sibbald wrote:
...
For Arno, I have created a new script that is similar to the setup that is
failing for him as he describes it, and now it is time for him to run that
script and then modify it to create the failure. Arno's script is
On Monday 28 November 2005 22:22, Karl Hungus wrote:
> Jonas,
>
> Although it says that nothing was written it actually writes almost the
> entire amount of data. It is basically continuously doing full backups
> but not completing all the way. I am able to get a status of the client
> without a
On Monday 28 November 2005 19:38, Martin Simmons wrote:
> > On Mon, 28 Nov 2005 17:06:00 +0100, Kern Sibbald <[EMAIL PROTECTED]>
> > said:
>
> Kern> On Monday 28 November 2005 15:55, Martin Simmons wrote:
> >> > On Fri, 25 Nov 2005 09:21:29 +, Greg Cope
> >> > <[EMAIL PROT
On Monday 28 November 2005 19:18, Ferdinando Pasqualetti wrote:
> Hi Kern,
> I should have thought that some practical problem was forcing to use read
> blocks. Maybe it is a silly idea, but do you think volumes could be matched
> with subdirs in disk storage and files inside them matched with file
On Monday 28 November 2005 19:15, Jonas Mixter wrote:
> Hi... It just struck me that it might be useful to know the output of
> the test-command in btape from the old machine. ;-)
>
> btape passes the "Write, rewind, and re-read test" but failes on the
> "Write, rewind, and position test"
>
> === W
On Monday 28 November 2005 19:08, Ferdinando Pasqualetti wrote:
> Hi Kern,
> thanks for your answer. The backup was terminated correctly (the log
> follows; the error in /invent was a badly mounted filesystem), and also the
> restore was able to detect that a single file was not restored correctly,
On Monday 28 November 2005 18:18, Harry Putnam wrote:
> Kern Sibbald <[EMAIL PROTECTED]> writes:
> >> Tell me if I'm getting the right picture:
> >> [Bac-dir
> >>Bac-SD
> >>here]FD
> >>Linux <-> win1 <-> external drive
> >> FD | |
> >>
On Monday 28 November 2005 17:25, Jonas Mixter wrote:
> Hi again...
> Thanks for your quick answer! I understand the details of my problem
> better now...
> I do have some more questions though.
>
> >>28-Nov 14:42 bscan: bscan Error: block.c:264 Volume data error at 0:1!
> >>Wanted ID: "BB02", got
Jonas,
Although it says that nothing was written it actually writes almost the
entire amount of data. It is basically continuously doing full backups
but not completing all the way. I am able to get a status of the client
without a problem. Any other ideas???
Thanks!
Jonas Mixter wrote:
Hi!
It seems like the director cannot contact your filedaemon. There are
0 files and 0 bytes backed up...
Could you do a "status client=yourclient-fd" from the director?
/ Jonas
On 2005-11-28 16:48, Karl Hungus wrote:
I
am still having problems backing up over a broadband connection.
> On Mon, 28 Nov 2005 17:06:00 +0100, Kern Sibbald <[EMAIL PROTECTED]> said:
Kern> On Monday 28 November 2005 15:55, Martin Simmons wrote:
>> > On Fri, 25 Nov 2005 09:21:29 +, Greg Cope <[EMAIL PROTECTED]>
>> > said:
>>
Greg> I am trying to glob a load of oracle backup f
Hi Kern,
I should have thought that some practical
problem was forcing to use read blocks. Maybe it is a silly idea, but do
you think volumes could be matched with subdirs in disk storage and files
inside them matched with files in tape volumes?
I imagine this would be an enormous
(and tedious) wo
Hi... It just struck me that it might be useful to know the output of
the test-command in btape from the old machine. ;-)
btape passes the "Write, rewind, and re-read test" but failes on the
"Write, rewind, and position test"
=== Write, rewind, and position test ===
I'm going to write 1000 recor
Hi Kern,
thanks for your answer. The backup was
terminated correctly (the log follows; the error in /invent was a badly
mounted filesystem), and also the restore was able to detect that a single
file was not restored correctly, because of different lengths in the db
and on backup. I think that it
Richard,
We implemented and tested Bacula + Iomega REV (IDE/ATAPI) extensively in our
small business server, ClarkConnect. It pretty
straightforward, with the REV drive being treated as any 'file' based backup,
with the exception that it is removable.
Ben
Benjamin Chambers, P.Eng.
ClarkC
On Monday 28 November 2005 16:39, Turbo Fredriksson wrote:
> Quoting Kern Sibbald <[EMAIL PROTECTED]>:
> Date: Mon, 28 Nov 2005 16:39:50 +0100
> In-Reply-To: <[EMAIL PROTECTED]> (Kern Sibbald's message
> of "Mon, 28 Nov 2005 10:34:13 +0100")
> Message-ID: <[EMAIL PROTECTED]>
> User-Agent: Gnus/5.1
On Monday 28 November 2005 16:22, Joshua Myles wrote:
> On 11/15/2005 08:07 AM, Kern Sibbald wrote:
> > On Tuesday 15 November 2005 13:59, Joshua Myles wrote:
> >>On 11/14/2005 04:45 PM, Kern Sibbald wrote:
> >>>I just took a look at my multiple drive regression test. In fact, I ran
> >>>it to mak
On Monday 28 November 2005 16:22, Joshua Myles wrote:
> On 11/15/2005 08:07 AM, Kern Sibbald wrote:
> > On Tuesday 15 November 2005 13:59, Joshua Myles wrote:
> >>On 11/14/2005 04:45 PM, Kern Sibbald wrote:
> >>>I just took a look at my multiple drive regression test. In fact, I ran
> >>>it to mak
Kern Sibbald <[EMAIL PROTECTED]> writes:
>> Tell me if I'm getting the right picture:
>> [Bac-dir
>>Bac-SD
>>here]FD
>>Linux <-> win1 <-> external drive
>> FD | |
>> win2 win3
>> FD FD
>> External drive has a pool wi
Hi again...
Thanks for your quick answer! I understand the details of my problem
better now...
I do have some more questions though.
28-Nov 14:42 bscan: bscan Error: block.c:264 Volume data error at 0:1!
Wanted ID: "BB02", got "". Buffer discarded.
...and then bscan exits.
I am still having problems backing up over a broadband connection. My
connection goes through a VPN tunnel. It appears that once a backup
gets >1GB I get the following errors. Any ideas what could be causing
this???
Below is the error and my relevant configuration. Thanks for any help!
22
On Monday 28 November 2005 16:00, Ferdinando Pasqualetti wrote:
> Hello list,
>
> sorry I sent the original message with a wrong sender address, it is here
> anyway. Again I was impressed by the restore performance during a massive
> restore. Trying to restore single files it seemed to me that pos
On Monday 28 November 2005 15:55, Martin Simmons wrote:
> > On Fri, 25 Nov 2005 09:21:29 +, Greg Cope <[EMAIL PROTECTED]>
> > said:
>
> Greg> I am trying to glob a load of oracle backup files. As per Stephan
> Greg> Ebelt's post these will be under /uNN dirs that are often on
> dif
On Monday 28 November 2005 15:32, Benoit Panizzon wrote:
> Hi Kern
>
> >> 50 Full 19,993 3,425,859,020 Error05-Nov-05 10:32 bang
> >>
> >> Is there a way to restore those files?
> >
> > Yes.
> >
> > Since the job terminated in error, there is no way to 100% guarantee that
> > the file
Quoting Kern Sibbald <[EMAIL PROTECTED]>:
Date: Mon, 28 Nov 2005 16:39:50 +0100
In-Reply-To: <[EMAIL PROTECTED]> (Kern Sibbald's message
of "Mon, 28 Nov 2005 10:34:13 +0100")
Message-ID: <[EMAIL PROTECTED]>
User-Agent: Gnus/5.1006 (Gnus v5.10.6) Emacs/20.7 (gnu/linux)
MIME-Version: 1.0
Content-Typ
Andrei,
You could edit the hosts file on your client computer and put in the ip
what you would like "server" to resolve to.
/etc/hosts
C:\windows\system32\drivers\etc\hosts
Andrei Mikhailovsky wrote:
Hello all
Is there a way to specify on the client side which IP address to use for
the ba
On Monday 28 November 2005 11:21, Messaggio Bacula wrote:
> Hello list,
> this is to show the (for me) impressive throughput in restoring files.
> Client and server are two HP Proliant G3 with 3 Gb RAM and mirrored SCSI
> disks, connected with a gigabit link. There is a problem in restoring one
> f
On 11/15/2005 08:07 AM, Kern Sibbald wrote:
> On Tuesday 15 November 2005 13:59, Joshua Myles wrote:
>
>>On 11/14/2005 04:45 PM, Kern Sibbald wrote:
>>
>>>I just took a look at my multiple drive regression test. In fact, I ran
>>>it to make sure it works. Yes, it works, and it writes on both dri
On Mon, 2005-11-28 at 14:55 +, Martin Simmons wrote:
> Greg> As expected regex = "^\/u[0-9]{2}" matches the lot.
>
> Greg> Can anyone shed any light on this or the regex code?
>
> The problem is that Bacula walks down the tree of directories looking for
> matching include/exclude patterns
Hello,
I'm probably more than half way (possibly 3/4) to getting the first
migration/copy job running, so I thought I would write up a few of the
details for those who are interested in checking my "design" or who simply
want to make comments.
What I have implemented already is (passes regress
Hello list,
sorry I sent the original message with
a wrong sender address, it is here anyway.
Again I was impressed by the restore
performance during a massive restore.
Trying to restore single files it
seemed to me that positioning performance in disk files was less efficient
than using tapes.
> On Fri, 25 Nov 2005 09:21:29 +, Greg Cope <[EMAIL PROTECTED]> said:
Greg> I am trying to glob a load of oracle backup files. As per Stephan
Greg> Ebelt's post these will be under /uNN dirs that are often on different
Greg> file systems.
Greg> What I am trying to do is;
Greg>
Though I have now given up on the hardware, I have been impressed by
bacula while trying to use it on a Seagate tape drive. I'm now
considering new alternatives and the Iomega Rev looks like an ideal
solution.
Has anyone used bacula with an Iomega Rev - either internal (IDE/ATAPI
or SCSI) or
Quoting Khalil Foundy <[EMAIL PROTECTED]>:
> I need your advice about the best way of monitoring bacula using a
> script. I am interested in monitoring the deamons, to see if they are
> running or not. I am also inetersted to know the status of the
> director/storage/client and of course running,
Hi,
This question has brought up before on 2004-07-02, but there was no
answer until now.
So I wonder if in the meantime someone has tried one of these drives
with bacula.
Regards
Daniel Blömer
--
Daniel Bloemer - BusinessCoDe GmbH
Systemadministration and Support
Phone: +49 (0)228 / 28925
Hi all
A client (bang) has totaly crashed during the last (and only one existing)
backup. So the status of this backup is error.
Nevertheles, probably most of the files have been saved...
How do I restore those files?
What I see in the status overview is:
50 Full 19,993 3,425,859,02
I use bacula 1.38 compiled from source, on FreeBSD 6.0 I386.
running on a DELL PV-136T 3.11 changer with 60 slots, 2 drives, 1
picker, 12 portals. The Tapedrives are IBM ULTRIUM-TD2 37RH`s
I use the chio-changer script for managing the cahnger, but when in
console and trying to label the tapes
Hello list,
this is to show the (for me) impressive
throughput in restoring files. Client and server are two HP Proliant G3
with 3 Gb RAM and mirrored SCSI disks, connected with a gigabit link.
There is a problem in restoring one
file (I think it is the last one), which resulted truncated. I tried
I agree with you about moving 8 before 7.
But from my test, I think that 8 is currently between 3 and 4.
There is something I don't understand : Is there something the 9 can do
that the 4 couldn't ?
(ie : prune oldest is included in prune all, no ?)
Ludovic.
Kern Sibbald wrote:
On Monday 28
On Monday 28 November 2005 14:59, Jonas Mixter wrote:
> Hi!
> I've just moved my AIT tape drive to a new machine. I've been running
> bacula for a few weeks on the new machine with no problems at all.
> Today I needed to get some files from an older tape and thought I would
> read all data from the
At 16:31 24/11/2005, you wrote:
Yesterday I had to try my first 'bare-metal restore' (eventually
succeeded - other mail). I took the machine home and booted up a
base install with static FD and console. Followed the documentation
about this but I never got a connection on the local FD (ran it
wi
Here is my ebuild for 1.38.2. This is basically a
bumped version of the 1.36.3 ebuild.
To use make sure you have a PORTDIR_OVERLAY set up in
your make.conf. Instructions for this can be found
here:
http://gentoo-wiki.com/HOWTO_Installing_3rd_Party_Ebuilds
I created mine in the standard place
/usr
Hi!
I've just moved my AIT tape drive to a new machine. I've been running
bacula for a few weeks on the new machine with no problems at all.
Today I needed to get some files from an older tape and thought I would
read all data from the tape into the new database first.
However, when running "/usr/
On Monday 28 November 2005 12:59, Benoit Panizzon wrote:
> Hi all
>
> A client (bang) has totaly crashed during the last (and only one existing)
> backup. So the status of this backup is error.
>
> Nevertheles, probably most of the files have been saved...
>
> How do I restore those files?
>
> What
Kern Sibbald wrote:
> Here is the algorithm that Bacula uses to get the next volume (as written in
> the manual):
>
> 1. Search the Pool for a Volume with VolStatus=Append (if there is more
>than one, the Volume with the oldest date last written is chosen. If
>two have the same date then
On Monday 28 November 2005 12:26, Ludovic Strappazon wrote:
> This is maybe more readable :
Yes, thanks, it keeps it all on one line.
So, thanks for the example, this seems pretty clear.
Here is the algorithm that Bacula uses to get the next volume (as written in
the manual):
1. Search the
Hi all
A client (bang) has totaly crashed during the last (and only one existing)
backup. So the status of this backup is error.
Nevertheles, probably most of the files have been saved...
How do I restore those files?
What I see in the status overview is:
50 Full 19,993 3,425,859,02
Just found a minor bug in v1.36.3 (don't know if it's
fixed in any newer version, but I thought I send a mail
about it anyway).
- s n i p -
*restore
First you select one or more JobIds that contain files
to be restored. You will be presented several methods
of specifying the JobIds. Then
I have a job that sometimes run to long (WAY to long
sometimes) which makes the other jobs cancel. I can't/don't
want to increase the reschedule option any more than I already
have, because then I'll get even WORSE delays later on.
I want the option to SOMETIMES (i.e. manually) reschedule
a specif
Yesterday I had to try my first 'bare-metal restore' (eventually
succeeded - other mail). I took the machine home and booted up a
base install with static FD and console. Followed the documentation
about this but I never got a connection on the local FD (ran it
with '-d100').
Who initiates the con
I just had to do my first 'bare-metal restore'. After a little
fiddling, I managed to restore the machine to exact state
(I was lucky, a full backup had run successfully the day before!).
But the job terminated with error, but all files was restored...
This is the mail I got (misunderstood WHERE
This is maybe more readable :
I have a pool with two full tapes :
Tape_1|Full|1 week|Recycle=yes|LastWritten=5/11/2005
Tape_2|Full|1 week|Recycle=yes|LastWritten=23/11/2005
And a Scratch Pool with Tape_3.
If I run a job, this is what happen :
Tape_1|Full|1 week|Recycle=yes|LastWritten=5/11/2
Kern Sibbald a écrit :
>On Monday 28 November 2005 09:33, Ludovic Strappazon wrote:
>
>
>>Hello,
>>
>>I've just tried the "Scratch Pool" feature. I'm very happy to have it in
>>Bacula.
>>However, I think there is two problems, unless I'm missing something :
>>
>>- Bacula takes a Scratch Pool vol
On Monday 28 November 2005 09:33, Ludovic Strappazon wrote:
> Hello,
>
> I've just tried the "Scratch Pool" feature. I'm very happy to have it in
> Bacula.
> However, I think there is two problems, unless I'm missing something :
>
> - Bacula takes a Scratch Pool volume when it can't find any append
Harry,
I can confidently say that in this business, its not what you know
that's important but
how quickly you can learn something new.
>From what you've said, you obviously don't have anything to worry about on
>that score!
Regards
Andrew R Paterson
DS Ltd.
Cedar Office Park
Cobham Ro
On Saturday 26 November 2005 20:28, John Du wrote:
> Hi,
>
> I am new to Bacula. I am trying to setup it on FreeBSD 5.3 with PostgreSQL
> 7.2. In PostgreSQL, "path" is a built-in type so "create table path" is
> illegal.
>
> What did you do to work around this problem?
Sorry for the sarcastic res
On Thursday 24 November 2005 16:20, Turbo Fredriksson wrote:
> I just had to do my first 'bare-metal restore'. After a little
> fiddling, I managed to restore the machine to exact state
> (I was lucky, a full backup had run successfully the day before!).
>
> But the job terminated with error, but a
Hi All,
I'm using this tapes drivers and It is working properly (with tar/cpio etc
...) using ide-scsi module (not ide-tape), but even using ide-scsi module
the tape driver doesn't pass btape test, I did a lot of effort to configure
in order to use it and I always got a fail.
I have decided no t
Hello Angela,
First, a hint on getting help. Please read the support page on the Bacula web
site. It indicates the kind of information we need to help you ...
Second hint, it is not possible to answer your question without knowing what
version of Bacula you are using because the algorithms us
On Monday 28 November 2005 00:33, Harry Putnam wrote:
> Christoph Haas <[EMAIL PROTECTED]> writes:
> > - Network: 10 MB/sec
> > - USB: 10 MB/sec
> > - ATA: 40-50 MB/sec
> >
> > So in your case it will probably not make a difference which system you
> > use to run and control the backup.
> >
> >> Th
If I remember right, one user got his Segate drive, which seems to be similar,
working by using the Onstream Device resource, and then setting the default
buffer size to 512 bytes using mt -f /dev/nst0 defblksize 512 (I don't
remember the exact syntax -- please check the email archives).
I don'
Hallo,
I'm using two sets of tapes alternatively which I change manually.
Now I have this situation:
I have totally 4 tapes in the differential pool.
Two are "inchanger" and two not.
From the two inchanger one is full and one is purged.
from the two which are actually not inchanger one is full a
Hi There,
I'm using bacula for a short period of time.
I would like to do long time archiving of some selected Files
(they will be manually selected and putted into a sperate folder on a hard
drive).
Using bacula's scheduler I would like to run a job once a week, which will
archive these data o
Hello,
I've just tried the "Scratch Pool" feature. I'm very happy to have it in
Bacula.
However, I think there is two problems, unless I'm missing something :
- Bacula takes a Scratch Pool volume when it can't find any appendable
volume, but it should (in my opinion) look before if there's any
re
Hi Greg,
> has anyone actually got one of these to work with bacula? This is a
> drive out of a Dell Machine (no idea what), and the drive was hardly
> used.
> This is an ATAPI model, set to slave, with no other devices on the IDE
> controller.
> I have wasted many hours now trying to get this dr
73 matches
Mail list logo